• 한국BIM학회 논문집
• /
• 제4권2호
• /
• pp.1-9
• /
• 2014

As interest in green building has increased, construction market has evolved through BIM-based architecture also, BIM-based technologies have been developed simultaneously. Due to this aspect, the need of environmental analysis software utilizing BIM data became essential. This study shows that BIM-based integrated module provides objective analysis to proceed quick decision-making for a proposal. In addition to that, this integrated module creates a model through BIM data to analyze and report residential environment and energy consumption such as, daylight, view, ventilation and privacy in order to practically apply the BIM technology from the schematic design.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.433-441
• /
• 2020

This study proposes a constant power tracking algorithm to compensate for the intermittent characteristics of Photovoltaic connected to a DC micro grid. A PV-ESS integrated module in which distributed ESS is additionally connected is utilized for the proposed algorithm. PV performs P&O MPPT control at all times. To supplement the intermittent characteristics of PV, the proposed constant power tracking algorithm maintains constant power by operating the distributed ESS of the PV-ESS integrated module in accordance with the output state of the PV. By performing PSIM simulation and an experiment, this study verifies the performance of the integrated module of PV-ESS for DC micro grids applying the constant power tracking algorithm.

• 전력전자학회논문지
• /
• 제28권1호
• /
• pp.39-47
• /
• 2023

This paper applies a structural technique with uniform parallel switch characteristics in gates and power loops to minimize the ringing and current imbalance that occurs when a general discrete package (TO-247)-based power semiconductor device is operated in parallel. Also, this propose a heat sink integrated switching module with heat sink design flexibility and high power density. The developed heat dissipation-integrated switching module verifies the symmetry of the parasitic inductance of the parallel switch through Q3D by ansys and the validity of the structural technique of the parallel switch using the LLC resonant converter experiment operating at a rated capacity of 7.5 kW.

• 한국공간구조학회논문집
• /
• 제1권2호
• /
• pp.59-66
• /
• 2001

This paper describes three modules for development of the Space Frame Integrated Design System(SFIDS). The Control Module is implemented to control the developed system. The Model Generation Module based on PATRAN user interface enables users to generate a complicated finite element model for space frame structures. The Optimum Design Module base on a branch of combinatorial optimization techniques which can realize the optimization of a structure having a large number of members designs optimum members of a space frame after evaluating analysis results. The Control Module and the Model Generation Module Is implemented by PATRAN Command Language(PCL) while C++ language is used in the Optimum Design Module. The core of the system is PATRAN database, in which the Model Generation Module creates information of a finite element model. Then, PATRAN creates Input files needed for the analysis program from the information of the finite element model in the database, and in turn, imports output results of analysis program to the database. Finally, the Optimum Design Module processes member grouping of a space frame based on the output results, and performs optimal member selection of a space frame. This process is repeated until the desired optimum structural members are obtained.

• 기본간호학회지
• /
• 제8권2호
• /
• pp.244-258
• /
• 2001

Purpose: The purpose of this study was to develop and apply a conceptualized PBL module for Fundamentals of Nursing. Method: A case study method was used to describe and explore the Process of developing and implementing the PBL module. Result: This module included three PBL packages that were designed to deal with more complexed and indepth concepts as the packages proceeded. In order to achieved that, all the contents of Fundamentals of Nursing II and III were reorganized and integrated into three main concepts, hygiene, infection and dehydration. This module was implemented for first year college student nurses in the second semester of year 2000. The student self-evaluation results showed that they were generally satisfied with their achievement in learning, both final outcome and process. Also, the results indicated that they were more satisfied with the subject management, the lecturer and their peers after implementing PBL. Conclusion : This study demonstrated the potentiality for the application of a partially integrated PBL module within an existing subject. However, when student learning needs were beyond the extent of Fundamentals of Nursing, the lecturer had to set boundaries on learning content and this may have reduced the effects of learning. Therefore, the researchers emphasize the importance of developing an integrated PBL curriculum to maximize student learning outcomes.

• 전력전자학회논문지
• /
• 제25권4호
• /
• pp.311-318
• /
• 2020

A photovoltaic (PV) system uses an AC module integrated converter (MIC) to operate PV cells at a maximum power point (MPP) and for high efficiency. The MPP of a PV cell varies depending on partial shading conditions, and loss occurs differently according to the configuration method of the PV-MIC. Therefore, this study compares the losses of passive components and power semiconductors according to the partial shading conditions of the PV module. Theoretical loss analysis is performed using parameters for the datasheet and PSIM simulation results. Analysis results verify that the one-stage PV-MIC demonstrates high efficiency.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1990년도 춘계공동학술대회논문집; 한국과학기술원; 28 Apr. 1990
• /
• pp.195-208
• /
• 1990

Flexible Manufacturing System(FMS) is an integrated, computer controlled complex of automated material handling devices and numerically controlled machine tools that can simultaneously process medium-sized volumes of a variety of part types. This paper discusses planning problems that can be solved for efficient use of an FMS and present an integrated decision support system for FMS production planning and scheduling problems. FMSDS(Flexible Manufacturing Systems Decision Support System) consists of data handling modules, part selection module, loading module, load adjusting module, scheduling module and simulation module etc. This paper presents the solution methodology of each subproblems and integrated interfaces between subproblems using hierarchical approaches and loop controls considering the relationships between subproblems. A case study by this model is presented.

• 한국태양에너지학회 논문집
• /
• 제22권2호
• /
• pp.1-10
• /
• 2002

This study is a study on the building integrated method of Photovoltaic. It was analyzed into a basic installation condition and an integrated form in this study. And it was confirmed through the 3D simulation & drawing work of an integrated situation to the real domestic building. The Photovoltaic installation of the country to an optimal efficiency for the year must be installed to the due south with an angle of thirty degrees. And also a module spacing must be more than doubled from the bottom to the top of module to prevent from efficiency falling by a shadow of photovoltaic module in a roof setting of flat roof. If Photovoltaic module is an adequate material that is a basic requirement as a building's finishing material, it's not only an efficiency of alternation with an existing finishing material but also a building's design element.

• 한국광학회지
• /
• 제14권2호
• /
• pp.135-141
• /
• 2003

양의 열광학 계수를 갖는 실리카를 하부클래드 및 코아에 그리고 음의 열광학 계수를 갖는 폴리머를 상부클래드에 적용한 AWG(Arrayed Waveguide Grating) 파장분할 다중화 소자에 대하여 이차원 스칼라 유한차분법(Scalar Finite Difference Method; SFDM)으로 온도의존 특성을 분석한 결과, 클래드의 굴절률을 변화시키거나 실리카 코어 상부에 실리카 박막이 존재하는 구조에서 박막의 두께를 변화시켜 온도의존 특성을 조절할 수 있음을 확인하였다. 이러한 해석결과에 근거하여 폴리머 상부클래드가 적용된 AWG 소자를 제작하였으며 기존의 실리카 AWG 소자와 특성을 비교분석하였다. 폴리머 상부클래드의 도입에 의해 삽입손실 및 크로스톡은 큰 변화가 없었으나 중심파장의 온도의존성은 0.0130 nm/$^{\circ}C$에서 0.0028 nm/$^{\circ}C$ 수준으로 감소하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.75-76
• /
• 2014

This study deals with a isolation type MIC(Module Integrated Converter) for AC module with advantages such as DC Wireless, freely selectable installation capacity, minimized shadow effect etc. In this paper, MIC circuit with the function which can remove the ripple voltage of PV module and give the discharging path for charged energy in leakage inductance of isolation transformer. The validity of proposed circuir is verified by the simulation with PSIM.