• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.240-241
• /
• 2013

태양광발전 시스템에서 PV 모듈 스트링에서 발생되는 손실을 저감할 수 있어 태양광 발전시스템의 발전효율을 향상시킬 수 있는 태양광발전용 마이크로인버터 (MIC: Module Integrated Converter)들의 출력특성을 시험하고 그 결과를 비교분석하여 마이크로인버터 설계에 있어 필요 요소들을 도출한다.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.33-36
• /
• 2002

A new smart antenna scheme based on spatial FFT is proposed. By combining the output of spatial FFT, the proposed structure shows similar performance gain compared to ordinary smart antenna systems. Moreover. the proposed scheme could be easily integrated to general receiver without beam focusing module. The analysis and simulation results show that the performances of proposed scheme are comparable to ordinary smart antenna systems

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.345-346
• /
• 2012

본 논문에서는 공진탱크만으로 고승압(>10)을 성취할 수 있는 새로운 비절연 컨버터를 제안한다. 제안한 컨버터는 스위치의 ZVS 턴온 및 다이오드의 ZCS 턴오프가 가능하여 스위칭 손실을 최소화 할 수 있으며 스위치의 전압정격이 출력전압보다 작아 작은 도통손실을 갖는 소자 선정이 가능하다. 제안하는 컨버터의 동작원리를 제시하고 실험을 통하여 타당성을 검증하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.19-19
• /
• 2007

Recently, we have developed p-i-n hydrogenated amorphous silicon (a-Si:H) single junction (SJ) thin film solar cells with RF (13,56MHz) plasma enhanced chemical vapor deposition (PECVD) systems, and also successfully fabricated the mini-modules (>300$cm^2$), using laser scribing technique to form an integrated series connection, The efficiency of a mini-module was 7.4% (Area=305$cm^2$, $I_{SC}$=0.25A, $V_{OC}$=14.74V, FF=62%).

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.96-97
• /
• 2003

We developed a wavelength selectable 8-channel WDM otpical transmitter. The module consisted of two 4-channel DFB-LD arrays monolithically integrated with a 1x4 Power combiner and an SOA. It operated at 1550 nm and 200 GHz spacing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.774-783
• /
• 2007

This paper presents an integrated packaging antenna-diplexer module for wireless communication systems in the Cellular and SDMB band. The design and the realization of the proposed one are experimentally analyzed and discussed. It consists of a dual-resonance antenna and a diplexer with a multi-layer LTCC(${\varepsilon}_r=7.8,\;tan\;{\delta}=0.0043$) technology with integration capability and low loss. The dual-resonance antenna of the proposed module has the meander line structure for size reduction and has the shorting structure of an inverted F antenna to achieve good impedance matching. The diplexer of the proposed module was designed with the combination of low pass filter(LPF) and high pass filter(HPF). Decreasing the mutual interference between them provides a high isolation characteristic. The proposed antenna-diplexer module with dimensions of $27.5{\times}12.0{\times}2.2mm$ operates within a range from 813 MHz to 902 MHz for the cellular band and from 2,586 MHz to 2,655 MHz for the SDMB band. And the measured gain of the fabricated module is -1.96 dBi for Cellular band and -5.43 dBi for SDMB band. The parameters for the antenna-diplexer module are investigated and the several performances are discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.68-75
• /
• 2022

In this study, in order to directly evaluate the prestress of the PSC structure, a new sensor module based on the measurement of the deformation of concrete was proposed using hetero-core optical fibers and performance tests were performed. In a hetero-core optical fiber, optical loss occurs when a specific part of the transmission path is bent, and the amount of optical loss changes linearly according to the magnitude of the curvature. In order to confirm the measurement performance of the sensor module and the applicability of the optical fiber, the sensor module was deformed and the light passing through the optical fiber was converted into wattage and measured. It can be seen that the light passing through the optical fiber has a linearity of 0.9333 in relation to the deformation while generating the maximum deformation of 0.5 mm at a rate of 0.12 mm/min in a cylindrical concrete specimen with a diameter of 15 cm and a height of 35 cm in which the sensor module is embedded. Based on the results of this experiment, it is judged that it is possible to directly evaluate the prestress of a PSC structure by embedding a sensor module using a hetero-core optical fiber in the structure and measuring the compression deformation in concrete. It is judged that it can be used as useful data for the development of a sheath tube integrated sensor module to be applied to be applied to the girder model experiment.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.500-506
• /
• 1999

We designed and fabricated a bidirectional optical transceiver module for low cost access network. An integrated chip forming a pin-PD on an 1.3 urn FP-LD was assembled by flip-chip bonding on a Si optical bench, a single mode fiber with an angled end facet was aligned passively with the integrated chip on V-groove of Si-optical bench. Gaussian beam theory was applied to evaluate the coupling coefficients as a function of some parameters such as alignment distance, angle of fiber end facet, vertical alignment error. The theory is also used to search the bottle-neck between transmittance and receiving coupling efficiency in the bi-directional optical system. Tn this paper, we confirmed that reduction of coupling efficiency by the vertical alignment error between laser beam and fiber core axis can be compensated by controlling the fiber facet angle. In the fabrication of sub-module, a'||'&'||' we made such that the fiber facet have a corn shape with an angled facet only core part, the reflection of transmitted laser beam from the fiber facet could be minimized below -35 dE in alignment distance of 2: 30 /J.m. In the same condition, transmitted output power of -12.1 dEm and responsivity of 0.2. AIW were obtained.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.249-256
• /
• 2007

AIn this paper, a new desist of LDI controller IC for general purpose is proposed for driving the LDI(LCD Driver Interface) controller in $4{\sim}9$ inches sized portable small-medium TFT-LCD(Thin Film Transistor addressed -Liquid Crystal Display) panel module. The designed LDI controller was verified on the FPGA(Reld Programmable Gate Array) test board, and was made the interactive operation with the commercial TFT-LCD panel successfully. The purpose of design is that it is standardized the LDI controller's operation by one LDI controller for driving all TFT-LCD panel without classifying the panel vendor, and size. The main advantage for new general-purpose LDI controller is the usage for the desist of all panel's SoG(System on a Glass) module because of the design for the standard operation. And in the previous method, it used each LDI controller for every LCD vendor, and panel size, but because a new one can drive all portable small-medium sized panel, it results in reduction of LDI controller supply price, and manufacturing cost of AV(Audio Video) board and panel. In the near future, the development of SoG IC(Integrated Circuit) for manufacturing more excellent functional TFT-LCD panel module is necessary. As a result of this research, the TFT-LCD panel can make more small size, and light weight, and it results in an upturn of domestic company's share in the world market. With the suggested theory in this paper, it expects to be made use of a basic data for developing and manufacturing for the SoG chip of TFT-LCD panel module.

• Journal of Intelligence and Information Systems
• /
• v.14 no.1
• /
• pp.47-66
• /
• 2008

This study is aimed at proposing a new type of ubiquitous decision support system (u-DSS) portal which is embedded with two important mechanisms like an intelligent ontology management module (i-OMM) and multi-agent coordination mechanism (MACM). The proposed portal provides timely decision support to the involved decision entities (represented as agents) by taking advantage of the two mechanisms embedded on the portal. The most important virtue of the proposed portal is that it can resolve two problems such as semantic discordance and data confliction which are occurring very often in an ubiquitous computing environment. Frequent requests of revising the already established decision information due to the rapid changes in decision entities' requirements require the extremely flexible and intelligent u-DSS vehicle like theproposed mechanism. In this sense, the i-OMM is designed to provide support to solving the semantic discordance in the way that the i-OMM virtually integrates ontology view (IOV) to integrate heterogeneous ontology among the agents engaged inubiquitous commerce situations. Then the i-OMM sends the IOV to the MACM to resolve the conflicts among the involved agents. The proposed u-DSS portal was applied to the u-fulfillment problem in which all the involved decisionagents need their own requirements to be satisfied seamlessly and timely. The experimental results show that the proposed u-DSS portal is very robust and promising in the field of u-DSS and context modeling.