• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.35.1-35.1
• /
• 2008

The importance on the simulation of earth observation optical payloads has been recently emphasized in order to estimate on-orbit imaging performance of the payloads. The estimation should consider all aspects of payload development; design, manufacture, test, assembly, launch and space environment. Until recently several studies have been focused the evaluation of the individual factors rather than the integrated. This paper presents the development of an integrated payload simulator. The simulator analyzes the payload imaging performance based on MTF(Modulation Transfer Function) calculations of the major factors (Diffraction, Aberration, Detector integration, Image motion and etc.) and the simulator can generate realistic artificial earth images as taken by defined earth observation payloads. The simulator is developed for the use of evaluating pre- and post-launch imaging performance and assisting on-board calibration of COMPSAT-3.

• ETRI Journal
• /
• 제26권4호
• /
• pp.344-350
• /
• 2004

We propose a filter-free wavelength conversion using a Mach-Zehnder interferometer with monolithically integrated $2{\times}2$ multimode interference semiconductor optical amplifiers (MMI-SOAs). The device has been optimized by considering a non-homogeneous carrier distribution due to the self-imaging properties of the MMI-SOA. Static measurements show an extinction ratio of up to 18 dB and an input signal rejection ratio of up to 20 dB.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1759-1769
• /
• 1989

This paper presents the development of a simulator for an industrial robot. The simulator is characterized by a fully integrated dynamic model and a hardware oriented control scheme. The dynamic model includes the actuator dynamics as well as the manipulator dynamics to integrate the entire dynamics of the robot system. On the other hand, the control scheme is oriented as a hardware structure which is usually implemented in the industrial robot. That is to say, a conventional PI control law is used to regulate the position, the speed, and the current. A Pulse Wave Modulation (PWM)generator modulates the supplied voltage to the actuator. Since the simulator is consistent with the industrial robot system, it provides the essential design concepts for the development process of the robot. In practice, the simulator is applied to the SCARA robot which has been developed in GSIS. Here, it investigates the characteristics and performance of the robot with changing design parameters. Thus, the investigation furnishes criteria for the selection of acfuator, control gain, trajectory planning, etc.

• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.41-48
• /
• 1992

The characteristics of traveling-wave electrodes for high-frequency electroptic integrated devices are described from the view point of improvement of phase-matching based on the conformal mapping method. Specific calculations of the characteristic impedance, effective microwave index, and eletrode loss for asymmetric coplanar strip(ACPS) and coplanar waveguide(CPW) electrode structures are presented as a function of the geometric electrode parameters including the electrode thickness and buffer layer thickness. 5-10(x10S0-6Tm) thick Au-ACPS electrodes were successfully fabricated by electroplating and ECR etcher. The improvement of modulation bandwidth can be theoretically observed from the combination of electrode and buffer layer thickness.

• ETRI Journal
• /
• 제35권3호
• /
• pp.459-468
• /
• 2013

A novel integrated laser, that is, a distributed reflector laser diode integrated with an electroabsorption modulator, is proposed to improve the output efficiency, single-mode stability, and chirp. The proposed laser can be realized using the selective metalorganic vapor phase epitaxy technique (that is, control of the width of the insulating mask), and its fabrication process is almost the same as the conventional electroabsorption modulated laser (EML) process except for the asymmetric coupling coefficient structure along the cavity. For our analysis, an accurate time-domain transfer-matrix-based laser model is developed. Based on this model, we perform steady-state and large-signal analyses. The performances of the proposed laser, such as the output power, extinction ratio, and chirp, are compared with those of the EML. Under 10-Gbps NRZ modulation, we can obtain a 30% higher output power and about 50% lower chirp than the conventional EML. In particular, the simulation results show that the chirp provided by the proposed laser can appear to have a longer wavelength side at the leading edge of the pulse and a shorter wavelength side at the falling edge.

• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.313-318
• /
• 2011

When wireless channels undergo fast fading, non-coherent frequency shift keying (FSK) (de)modulation schemes may be considered for amplify-and-forward (AF) cooperative communications. In this paper, we derive the bit-error-rate performance of partial non-coherent receiver as a lower bound of the optimal non-coherent receiver for FSK modulated AF cooperative communications. From the simulation and analytical results, it is found that the derived lower bound is very closed to simulation results. This result shows that knowing partial channel state information may not improve system performance significantly. On the other hand, conventional optimal non-coherent receiver involves complicated integration operation. To address the above complexity issue, we also propose a near optimal non-coherent receiver which does not involve integration operation. Simulation results have shown that the performance gap between the proposed near optimal receiver and the optimal receiver is small.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.177-179
• /
• 2009

It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. So study of integrated data transmission in a subway and railway is activated. The research deals with pass loss characteristics of 18GHz microwave that is assigned frequency of integrated data transmission in a subway and railway. It is used sample integrated transmission system in subway and railway of KRRI(korea railroad research Institute) at the tunnel and road. Specification of test sample system is blow. It use OFDM modulation, Wireless frequency is 18GHz and 19GHz, Maximum output power is 20dBm, Receive sensitivity is -90dBm. The pass loss exponent and standard variation of road and tunnel is analyzed.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권1호
• /
• pp.64-73
• /
• 2012

Pointing stability of high precision observation satellites must satisfy the stringent requirements to perform at a designed level. As even a small vibrational disturbance can result in severe degradation of the optical performance, the effects of inorbit vibrational environment on the performance of optical payload must be predicted and analyzed in the design phase in order to ensure that the requirements imposed on the payload are fully met. In this paper, an integrated framework for the evaluation of the performance of optical payloads is developed. The developed simulation tool comprises of the reaction wheel induced disturbance model, state space model of a structure in modal form and Cassegrain reflector model. The performance degradation of the optical system due to jitter is expressed by using modulation transfer function (MTF) and image simulation. Moreover, vibration isolator model is also added to show the effectiveness of using a vibration isolator for the elimination of the effects of jitter in the acquisition of an image.

• 한국정보통신학회논문지
• /
• 제15권8호
• /
• pp.1797-1804
• /
• 2011

본 논문에서는 주변 환경에 따라 다양한 채널 상태를 나타낼 수 있는 분산형 나카가미 페이딩 채널하에서 선형의 시공간 블록코드 (Space-Time Block Code) 직교 설계로부터 평균 비트 에러율(Bit Error Rate)성능을 평가하여 MIMO(Multiple Input Multiple Output) 채널의 안테나 열 구성과 동작환경의 영향을 분석하였고 향상된 BER을 위한 MT 안테나의 설계조건과 페이딩 지수 m을 제안 한다. 시스템 성능의 분석을 위해 M-PSK(M-ary Phase Shift Keying)변조 방식과, M-QAM(M-ary Quadra -ture Amplitude Modulation)변조 방식을 사용 하였고, 분석 식은 각각 적분된 나카가미 페이딩 변수와 적분되지 않은 나카가미 페이딩 변수로부터 시스템의 성능을 비교 분석하였다. 채널 배열의 구성은 행렬의 수식적 계산에 의해 얻게 되며, AOA 확산이 감소하는 것에 따라 STBC(Space - Time Block Codes) BER성능이 감소하며, 이와 같은 손실은 안테나 간격의 증가나, 배열구성의 변경을 통해 보상 될 수 있다.

• 전력전자학회논문지
• /
• 제14권1호
• /
• pp.23-30
• /
• 2009

본 논문에서는 LCD TV의 인치에 따라 다르게 적용되는 기존의 PID(Power-Integrated Drive)시스템과 PSD(Power-Separated Drive)시스템을 검토하여, 두 시스템의 장점만을 모아 LCD TV 전원 시스템의 표준화가 가능한 새로운 방식의 구동 전원 통합 시스템을 제안한다. 제안 시스템은 가격 및 효율이 우수한 2단 구성으로 이루어져 있고, 안전규격을 만족하기 위하여 1:1 트랜스포머를 사용하였다. 인버터 부의 최적 동작을 위해 인버터 구동신호의 주파수와 시비율을 고정하고 펄스 개수를 제어하는 Pulse Count Modulation(PCM)방식을 채용 하였다. 제안 시스템의 인버터 단은 전 부하 범위에서 영전압 스위칭이 가능하여 스위치의 발열이 우수하고, 별도의 전류 평형 트랜스포머가 필요치 않으므로 Balance Coil의 삭제가 가능하다. 이로 인해 신뢰성이 높은 제품 구성이 가능하고, PCB Size 축소 및 제작 원가가 낮아지는 장점을 갖는다. 최종적으로 제안 시스템을 기존 시스템과 비교 및 실험적 검증을 통하여 제안 시스템의 우수성을 확인한다.