DOI QR코드

DOI QR Code

Proposal and Analysis of Distributed Reflector-Laser Diode Integrated with an Electroabsorption Modulator

  • Kwon, Oh Kee (Components & Materials Research Laboratory, ETRI) ;
  • Beak, Yong Soon (Components & Materials Research Laboratory, ETRI) ;
  • Chung, Yun C. (Department of Electrical Engineering, Korean Advanced Institute of Science and Technology) ;
  • Park, Hyung-Moo (Department of Electrical Engineering, Dongguk University)
  • Received : 2012.05.20
  • Accepted : 2012.10.30
  • Published : 2013.06.01

Abstract

A novel integrated laser, that is, a distributed reflector laser diode integrated with an electroabsorption modulator, is proposed to improve the output efficiency, single-mode stability, and chirp. The proposed laser can be realized using the selective metalorganic vapor phase epitaxy technique (that is, control of the width of the insulating mask), and its fabrication process is almost the same as the conventional electroabsorption modulated laser (EML) process except for the asymmetric coupling coefficient structure along the cavity. For our analysis, an accurate time-domain transfer-matrix-based laser model is developed. Based on this model, we perform steady-state and large-signal analyses. The performances of the proposed laser, such as the output power, extinction ratio, and chirp, are compared with those of the EML. Under 10-Gbps NRZ modulation, we can obtain a 30% higher output power and about 50% lower chirp than the conventional EML. In particular, the simulation results show that the chirp provided by the proposed laser can appear to have a longer wavelength side at the leading edge of the pulse and a shorter wavelength side at the falling edge.

Keywords

References

  1. D. Marcuse, "DFB Laser with Attached External Intensity Modulator," IEEE J. Quantum Electron., vol. 26, no. 2, Feb. 1990, pp. 262-269. https://doi.org/10.1109/3.44957
  2. M. Aoki et al., "InGaAs/InGaAsP MQW Electroabsorption Modulator Integrated with a DFB Laser Fabricated by Band-Gap Energy Control Selective Area MOCVD," IEEE J. Quantum Electron., vol. 29, no. 6, June 1993, pp. 2088-2096. https://doi.org/10.1109/3.234473
  3. O. Sahlen, "Optimization of DFB Lasers Integrated with Frantz- Keldysh Absorption Modulators," J. Lightw. Technol., vol. 12, no. 6, June 1994, pp. 969-976. https://doi.org/10.1109/50.296186
  4. M. Yamaguchi et al., "Requirements for Modulator-Integrated DFB LD's for Penalty-Free 2.5-Gb/s Transmission," J. Lightw. Technol., vol. 13, no. 10, Oct. 1995, pp. 1948-1954. https://doi.org/10.1109/50.469742
  5. Y.H. Kwon et al., "40 Gb/s Traveling-Wave Electroabsorption Modulator-Integrated DFB Lasers Fabricated Using Selective Area Growth," ETRI J., vol. 31, no. 6, Dec. 2009, pp. 765-769. https://doi.org/10.4218/etrij.09.1209.0039
  6. C. Sun et al., "Influence of Residual Facet Reflection on the Eye- Diagram Performance of High-Speed Electroabsorption Modulated Lasers," J. Lightw. Technol., vol. 27, no. 15, Aug. 2008, pp. 2970-2976.
  7. M. Aoki et al., "New Transmission Simulation of EA-Modulator Integrated DFB-Lasers Considering the Facet Reflection-Induced Chirp," IEEE Photon. Technol. Lett., vol. 9, no. 3, Mar. 1997, pp. 380-382. https://doi.org/10.1109/68.556080
  8. B.H. Park et al., "Investigation of Optical Feedback in High Speed Electroabsorption Modulated Lasers with a Window Region," IEEE Photon. Technol. Lett., vol. 17, no. 4, Apr. 2005, pp. 777- 779. https://doi.org/10.1109/LPT.2005.843954
  9. R.A. Salvatore and R.T. Sahara, "Reduction in Reflection-Induced Chirp from Photonic Integrated Sources," IEEE Photon. Technol. Lett., vol. 14, no. 12, Dec. 2002, pp. 1662-1664. https://doi.org/10.1109/LPT.2002.804655
  10. H. Soda et al., "Stability in Single Longitudinal Mode Operation in GaInAsP/InP Phase-Adjusted DFB Lasers," IEEE J. Quantum Electron., vol. 23, no. 6, June 1987, pp. 804-814. https://doi.org/10.1109/JQE.1987.1073454
  11. O.K. Kwon et al., "Effects of Asymmetric Grating Structures on Output Efficiency and Single Longitudinal Mode Operation in λ/4-Shifted DFB Laser," IEEE J. Quantum Electron., vol. 47, no. 9, Sept. 2011, pp. 1185-1194. https://doi.org/10.1109/JQE.2011.2160617
  12. N. Kim et al., "Widely Tunable 1.55-μm Detuned Dual-Mode Laser Diode for Compact Continuous-Wave THz Emitter," ETRI J., vol. 33, no. 5, Oct. 2011, pp. 810-813. https://doi.org/10.4218/etrij.11.0210.0429
  13. K. Komori et al., "Single-Mode Properties of Distributed- Reflector Lasers," IEEE J. Quantum Electron., vol. 25, no. 6, June 1989, pp. 1235-1244. https://doi.org/10.1109/3.29254
  14. J.I. Shim et al., "Lasing Characteristics of 1.5 μm GaInAsP-InP SCH-BIG-DR Lasers," IEEE J. Quantum Electron., vol. 27, no. 6, June 1991, pp. 1736-1745. https://doi.org/10.1109/3.89999
  15. G.L. Li et al., "Ultra-Speed Traveling-Wave Electroabsorption Modulator-Design and Analysis," IEEE Trans. Microw. Theory Techn., vol. 47, no. 7, July 1999, pp. 1177-1183. https://doi.org/10.1109/22.775455
  16. O.K. Kwon et al., "Improvement of Modulation Bandwidth in Electroabsorption-Modulated Laser by Utilizing the Resonance Property in Bonding Wire," Opt. Express, vol. 20, no. 11, May 2012, pp. 11806-11812. https://doi.org/10.1364/OE.20.011806
  17. P.J. Steven et al., "Computer Modeling of the Electric Field Dependent Absorption Spectrum of Multiple Quantum Well Material," IEEE J. Quantum Electron., vol. 24, no. 10, Oct. 1988, pp. 2007-2016. https://doi.org/10.1109/3.8536
  18. O.K. Kwon, Y.S. Beak, and Y.C. Chung, "Electroabsorption Modulated Laser with High Immunity to Residual Facet Reflection," IEEE J. Quantum Electron., vol. 48, no. 9, Sept. 2012, pp. 1203-1213. https://doi.org/10.1109/JQE.2012.2206799
  19. J. Kinoshita, "Modeling of High-Speed DFB Lasers Considering the Spatial Holeburning Effect Using Three Rate Equations," IEEE J. Quantum Electron., vol. 30, no. 4, Apr. 1994, pp. 929- 938. https://doi.org/10.1109/3.291364
  20. K. Kudo, S. Arai, and J.I. Shim, "Linewidth Reduction of DSM Lasers Due to Effects of Composite Cavity and Distributed Reflectors," IEEE J. Quantum Electron., vol. 29, no. 6, June 1993, pp. 1769-1781. https://doi.org/10.1109/3.234433

Cited by

  1. Thin film display based on polymer waveguides. vol.22, pp.19, 2014, https://doi.org/10.1364/oe.22.023433