• 전자공학회논문지
• /
• 제54권1호
• /
• pp.139-146
• /
• 2017

ISDB-T(Integrated Service Digital Broadcasting Terrestrial)는 OFDM(Orthogonal Frequency Division Multiplexing) 기반의 전송기술 및 Time Interleaving 기술을 사용하고 있기 때문에 다중 경로 및 Impulse Noise에 대응 가능하며, 이동 수신 환경에서도 어느 정도 양호한 성능을 나타낸다. 원세그(One-Seg), 풀세그(Full-Seg)는 할당된 세그먼트 개수에 따라 구분하며, 원세그 수신기는 변복조 방법으로 QPSK(Quadrature Phase Shift Keying)를 사용하기 때문에 64QAM(64 Quadrature Amplitude Modulation)을 사용하는 풀세그 수신기와 비교하여 높은 기술력 없이도 구현 가능하지만, 영상 데이터율의 한계로 화면 사이즈와 해상도의 제한이 크다. 본 논문에서는 셋탑박스, 고정형 TV, 일체형 네비게이션 등에 적용 가능한 HD급 해상도를 지원하는 풀세그 ISDB-T 방송 수신 모듈을 설계하고 구현한다. 실험을 통해 개발된 풀세그 ISDB-T 방송 수신 모듈의 기능이 정상적으로 동작함을 확인하였다.

• 한국통신학회논문지
• /
• 제32권11C호
• /
• pp.1102-1110
• /
• 2007

본 논문에서는 기존의 정진폭 다중 부호 이진 직교 (CAMB: Constant-Amplitude Multi-code Biorthogonal) 변조 이론을 적용한 변복조기를 프로그래밍 가능한 게이트 배열 (FPGA: Field-Programmable Gate Array)을 사용하여 설계하고 시스템 온 칩 (SoC: System on Chip)으로 구현하였다. 이 변복조기는 FPGA을 이용하여 타겟팅 한 후 보드실험을 통해 설계에 대한 충분한 검증을 거쳐 주문형 반도체 (ASIC: Application Specific Integrated Circuit) 칩으로 제작되었다. 이러한 12Mbps급 모뎀의 SoC를 위하여 ARM (Advanced RISC Machine)7TDMI를 사용하였으며 64K바이트 정적 램 (SRAM: Static Random Access Memory)을 내장하였다. 16-비트 PCMCIA (Personal Computer Memory Card International Association), USB (Universal Serial Bus) 1.1, 16C550 Compatible UART (Universal Asynchronous Receiver/Transmitter) 등 다양한 통신 인터페이스를 지원할 뿐 아니라 ADC (Analog to Digital Converter)/DAC (Digital to Analog Converter)를 포함하고 있어 실제 현장에서 쉽게 활용될 수 있을 것으로 기대된다.

• 대한전자공학회논문지TC
• /
• 제44권10호
• /
• pp.156-161
• /
• 2007

본 논문에서는 이동 통신 환경에서 데이터율을 높이기 위해 현재 사용되는 변조 방식보다 고차원의 변조방식에 대한 성능을 비교 분석하였다. 기존에 주로 사용되던 정사각형 형태의 QAM은 BER 성능 면에서는 다른 변조 방식에 비해 우수한 특성을 보이나 진폭의 수가 증가함에 따라 송수신 신호의 다이나믹 레인지가 증가하여 증폭기의 선택에 제한이 생기고, 증폭 과정에서의 에러 발생률이 증가하게 된다. 그러나 본 논문에서 제안하는 APSK 방식의 변조 방식은 기존의 QAM에 비해 미미한 성능 저하를 보이지만 송수신 신호의 다이나믹 레인지 면에서 이득을 얻을 수 있기 때문에 특히 CDMA나 OFDM과 같이 여러 신호가 합의 형태로 송수신되는 시스템에 제한된 범위의 고차원의 변조 방식으로 성능의 유효성이 있다. 또한 이 경우 저력 효율이 좋은 비선형성 증폭기의 사용이 가능하기 때문에 시스템 면에서도 큰 이득이 예상된다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.840-848
• /
• 2016

A primary-side regulation AC-DC converter operating in the PFM (Pulse Frequency Modulation) mode with a high precision output current is designed, which applies a novel inductance compensation technique to improve the precision of the output current, which reduces the bad impact of the large tolerance of the transformer primary side inductance in the same batch. In this paper, the output current is regulated by the OSC charging current, which is controlled by a CC (constant current) controller. Meanwhile, for different primary inductors, the inductance compensation module adjusts the OSC charging current finely to improve the accuracy of the output current. The operation principle and design of the CC controller and the inductance compensation module are analyzed and illustrated herein. The control chip is implemented based on a TSMC 0.35μm 5V/40V BCD process, and a 12V/1.1A prototype has been built to verify the proposed control method. The deviation of the output current is within ±3% and the variation of the output current is less than 1% when the inductances of the primary windings vary by 10%.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.520-528
• /
• 2013

A 20 mm diameter of small 5-D.O.F. force sensor has been developed for applications in MR-field Optical intensity modulation was adopted for transducing to miniaturize the sensor structure. For its accurate sensing of 5-D.O.F. force/moment, the elastic detecting module was designed to respond independently to each force or moment component. And for small size, two optical transducing modules of 2-D.O.F. and 3-D.O.F. were designed and integrated with the detecting module where optical fibers were arranged in parallel to make the sensor small. It is confirmed by calibration test that the detecting modules deforms linearly and independently to the input force. The results of evaluating test show that the range and resolution of forces are ${\pm}4$ N and 0.94~7.1 mN and the range and resolution of moments are ${\pm}120N{\cdot}mm$ and $0.023{\sim}0.034N{\cdot}mm$.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.685-692
• /
• 2011

DC/DC switching power converters produce DC output voltages from different DC input sources. The converters can be used in regenerative braking of DC motors to return energy back in the supply, resulting in energy savings for the systems containing frequent stops. The current mode DC/DC converter is composed of a PWM (pulse width modulation) controller, a MOSFET, and inductor, etc. Pulse width modulation is applied to control and regulate the total output voltage. It is shown that the variation of threshold voltage at MOSFET and the offset voltage increase caused by radiation effects make the PWM pulse unstable. In the PWM operation, the missing pulses, the changes in pulse width, and a change in the period of the output waveform are studied by simulation program with integrated circuit emphasis (SPICE) and experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권4호
• /
• pp.1954-1971
• /
• 2017

In this work, first, a multiuser detection (MUD) algorithm based on component-level soft interference cancellation and linear minimum mean square error (CLSIC-LMMSE) is proposed, which can enhance the bit error ratio (BER) performance of the traditional SIC-LMMSE-based MUD by mitigating error propagation. Second, for non-binary low density parity check (NB-LDPC) coded high-order modulation systems, when the proposed algorithm is integrated with partial mapping, the receiver with iterative detection and decoding (IDD) achieves not only better BER performance but also significantly computational complexity reduction over the traditional SIC-LMMSE-based IDD scheme. Extrinsic information transfer chart (EXIT) analysis and numerical simulations are both used to support the conclusions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.739-742
• /
• 2002

This article proposes a Four-Quadrant Analog Multiplier (4-QAM) applying switched-capacitor and pulse-width amplitude modulation (PWAM) principles. The features of the presented circuit are that it can function as analog multiplier with a wide dynamic range of input signal and no disturbing from deviation of carrier frequency of PWM signal. In addition, the circuit detail is simpler than that of the previously proposed circuits. It is then easy and applicable for employing it into Integrated Circuit (IC) realization to especially operate in low-frequency and low-power applications. The experimental results granted are in correspondence to the theoretical analysis.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1999년도 춘계학술발표논문집 논문집
• /
• pp.139-145
• /
• 1999

In current study on 8 college students there was examined modulation of eyeblink (as measured by integrated EMG of m.orbicularis oculi) and skin conductance response (SCR) to an acoustic startle probe (85 dB[A] white noise) by attending to task presented in auditory modality (to memorize words for further recognition) and entire performance of the word recognition test. Both eyeblink magnitude and SCR amplitude and rise time to startle probes were modified (larger magnitude of EMG peak, lower amplitude and shorter rise time of SCR) during attending to task as compared to performance on test. Results are interpreted n terms of modification of electrodermal and eyeblink components of startle and orienting reflexes by task characteristics (passive versus active efforts), attentional demands and aversiveness of experimental situation. However, eyeblink startle response manifested potentiation during attending to task, while SCR demonstrated attenuation. There are discussed implications of startle modulatioas a potentially sensitive probe of situational demands in stress research and also are considered prospects for further studies.