• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권4호
• /
• pp.493-500
• /
• 2015

A flyback converter operates with either pulse width modulation (PWM) or pulse frequency modulation (PFM) control scheme depending on the load current. At light load condition, PFM control is employed to reduce the switching frequency and thereby minimize the switching power loss. For heavier load, PWM control is used to regulate the output voltage of the flyback converter. The flyback controller has been implemented in a $0.35{\mu}m$ BCDMOS process and applied to a 40-W flyback converter. The light-load power efficiency of the flyback converter is improved up to 5.7-% comparing with the one operating with a fixed switching frequency.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.28-36
• /
• 1998

Widely tunable diodes integrated with periodically sampled and chirped DBR(distributed Bragg reflector) and an EA(electroabsorption) modulator are analyzed dynamically using the improved largesinal time-domain model. The tuning characteristics of sampled- and chirped-grating DBR laser diodes are demonstrated theoretically. The results of the simulation agree well with those of the experiment. And the intensity-modulation properties of the laser diodes integrated with an EA modulator are calculated. It is shown that the external modulation has the lower frequency chirp by 1/20 for the same extinction ratio than the direct modulation, and also the short pulse train can be generated using the optical gating of an EA modulator.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.365-373
• /
• 2010

This paper proposes a hybrid single carrier sinusoidal modulation suitable for multiphase multilevel inverters. Multiphase multilevel inverters are controlled by hybrid modulation to provide multiphase variable voltage and a variable frequency supply. The proposed modulation combines the benefits of fundamental frequency modulation and single carrier sinusoidal modulation (SC-SPWM) strategies. The main characteristics of hybrid modulation are a reduction in switching losses and improved harmonic performance. The proposed algorithm can be applied to cascaded multilevel inverter topologies. It has low computational complexity and it is suitable for hardware implementations. SC-SPWM and its base modulation design are implemented on a TMS320F2407 digital signal processor (DSP). A Complex Programmable Logic Device realizes the hybrid PWM algorithm and it is integrated with a DSP processor for hybrid SC-SPWM generation. The feasibility of this hybrid modulation is verified by spectral analysis, power loss analysis, simulation and experimental results.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.380-388
• /
• 2017

Since the carrier sequence is not reproducible in a period of the random carrier pulse width modulation (RCPWM) and a higher harmonic spectrum amplitude is likely to affect the quality of the power supply. In addition, electromagnetic interference (EMI) and mechanical vibration will appear. To solve these problems, this paper has proposed an optimal RCPWM based on a genetic algorithm (GA). In the optimal modulation, the range of the random carrier frequency is taken as a constraint and the reciprocal of the maximum harmonic spectrum amplitude is used as a fitness function to decrease the EMI and mechanical vibration caused by the harmonics concentrated at the carrier frequency and its multiples. Since the problems of the hardware make it difficult to use in practical engineering, this paper has presented a hardware system. Simulations and experiments show that the RCPWM is effective. Studies show that the harmonic spectrum is distributed more uniformly in the frequency domain and that there is no obvious peak in the wave spectra. The proposed method is of great value to research on RCPWM and integrated power systems (IPS).

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.277-284
• /
• 2010

This paper presents a novel hybrid carrier based space vector modulation for cascaded multilevel inverters. The proposed technique inherits the properties of carrier based space vector modulation and the fundamental frequency modulation strategy. The main characteristic of this modulation are the reduction of power loss, and improved harmonic performance. The carrier based space vector modulation algorithm is implemented with a TMS320F2407 digital signal processor. A Xilinx Complex Programmable Logic Device is used to develop the hybrid PWM control algorithm and it is integrated with a digital signal processor for hybrid carrier based space vector PWM generation. The inverter offers less weighted total harmonic distortion and it operates with equal electrostatic and electromagnetic stress among the power devices. The feasibility of the proposed technique is verified by spectral analysis, simulation, and experimental results.

• 전자공학회논문지D
• /
• 제35D권8호
• /
• pp.53-61
• /
• 1998

Dynamic characteristics of widely tunable SGDBR/SSGDBR laser diodes integrated with an electroabsorption modulator is inestigated using an improved large-signal timef-domain model. First, wide tunning properties of a SGDBR laser diode and a SSGDBR laser diode are analyzed respectively and compared with each other. And, intensity-modulation characteristics of a SGDBR laser diode incorprating an electroabsorption modulator are investigated. It is shown that an external modulation has the lower frequency chirp by 1/20 for almost same extinction ratios than a direct modulation, and a nearly transform-limited pulse train can be generated using the optical gating of an electroabsorption modulator.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.323-331
• /
• 2022

Electro-optic modulator (EOM) takes a vital role in connecting the electric and optical fields. Here, we present a heterogeneously integrated EOM based on the lithium niobate-on-insulator (LNOI) platform. The key modulation waveguide structure is a field-enhanced slot waveguide formed by embedding silicon nanowires in a thin-film lithium niobate (LN), which is different from the previously reported LN ridge or etchless LN waveguides. Based on such slot structure, optical mode field area is reduced and enhanced electric field in the slot region can interact well with LN material with high Electro-optic (EO) coefficient. Therefore, the improvements in both aspects have positive effects on enhancing the modulation performance. From results, the corresponding EOM by adding such modulation waveguide structure achieves better performance, where the key half-wave-voltage-length product (V_𝜋L) and 3 dB EO bandwidth are 1.78 V·cm and 40 GHz under the electrode gap width of only 6 ㎛, respectively. Moreover, Lower V_𝜋L can also be achieved. With these characteristics, such field-enhanced waveguide structure could further promote the development of LNOI-based EOM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.90-95
• /
• 1995

This paper describes the highly-sensitive Si magnetic sensor using the amplitude modulation in order to real ice the integrated magnetic sensor which to sensor a weak magnetic field. Generally, the most important two parameters in Hall IC which degrade the ability of magnetic detection are the variation of offset according to the variation of temperature and the noise of amplifiers. In this paper, we use a Hall element and compensator to reduce the offset and the nouse of amplifiers by Using amplititude modulation method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1129-1133
• /
• 2002

This paper presents an electronic ballast using a novel multiplex modulation method for the metal halide lamp. The proposed modulation method, which has a modulating signal of swept multiplex frequency, can eliminate the acoustic resonance more effectively than the conventional modulation method, which has a modulating signal of constant frequency. For the purpose of future application specific integrated circuits (ASIC), the controller of the proposed ballast has been designed only with erasable programmable logic devices (EPLDs), but without a microprocessor. In this paper, detailed proposed modulation schemes are described and experimental results on the proto-type 150W metal halide lamp ballast with the proposed modulation method are discussed.

• 전력전자학회논문지
• /
• 제12권6호
• /
• pp.441-448
• /
• 2007

대화면 LCD TV (40인치 이상)에서 LCD 인버터의 가격 경쟁력을 위해 인버터 하나로 다수의 램프를 병렬 구동하면서 Two Stage System 구조인 IP(Integrated Power) Board 형태의 인버터 회로가 많이 사용되고 있다. 본 논문에서는 기존 IP Board의 인버터 구동 방식인 Pulse Width Modulation (PWM) 제어 방식을 분석하고, 문제점으로 제기되었던 Half-Bridge단 스위치의 하드 스위칭과 과도한 Circulating Energy 문제를 해결한 새로운 Pulse Count Modulation (PCM) 방식을 적용한 인버터를 제안하고 이론 및 실험적 검증을 통해 제안된 방식의 우수성을 확인하였다.