• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.868-876
• /
• 2009

This paper presents a design and implementation of Usecase modeling tool to support integrated usecase diagramming and description writing. It also suggests diagram maintaining based on relationship and it makes UML standard diagramming by providing connection verification between diagram elements. It results in not only user-friendly and effective usecase modeling but it also contributing to integrated and consistent usecase modeling.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.8-17
• /
• 2022

This paper presents a novel geometric modeling technique to predict the mechanical properties of an aircraft wing's skin-stringer integrated panel. Due to mechanical and adhesive fastening, this panel is vulnerable to stress concentration and debonding, so we designed it to integrate the skin and stringer using three-dimensional woven composites. Geometric modeling was conducted by measuring the geometric parameters of the specimen and defining the pattern of the yarns as functions. We used a weighted average model with iso-strain and iso-stress assumptions to predict the mechanical properties of the panel parts. We then compared the results of a finite element analysis with a compression test to verify the accuracy of our model. Our proposed technique proved to be more efficient than the traditional experimental method for predicting the mechanical properties of skin-stringer integrated panels.

• Journal of the Korea Society for Simulation
• /
• v.22 no.1
• /
• pp.21-30
• /
• 2013

A hybrid system is a combination of sub systems which have different types of state and time: a typical example is a combination of discrete event and continuous systems. A HDEVS(Hybrid DEVS) formalism was proposed for modeling and analyzing a hybrid system. The HDEVS formalism allows modelers to construct a hierarchical and modular model based on the mathematical set theory. Because the HDEVS formalism was applied to the distributed and interoperated simulators, modelers should make several heterogenous models dividing a target system. Hence, this paper proposes an extended hybrid coupled model of HDEVS formalism and an integrated hybrid modeling methodology in contrast to the existing simulation framework on interoperable simulators. By applying the proposed modeling method, a target system can be translated to a hybrid model in a similar form as the target system. This paper also contains a simulation engine design for the proposed modeling methodlogy and a case study which simulates water tank control systems.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.45-50
• /
• 2015

The simulation model of All-Electric-Ship consists of electrical and mechanical systems. Running the total simulation requires considerable time and causes a lack of computer memory, because the two systems have different dynamic characteristics. Therefore, integrated simulation is practically impossible. This paper proposes the simplified model of electrical system to reduce simulation time significantly, compared to the detailed model. The validity of the proposed simplified model is verified by comparing detailed and simplified simulation results. Thus, the simplified models are applied to the integrated system. As a result, total system simulation can be implemented.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1227-1237
• /
• 1988

A practically useful CAD system for mold design in the plastic injection molding processes has been developed. Even though many efforts have been tried to simulated the injection molding process, this is the first attempt toward an automatic mold design system instead of a manufacturing or a simulation system. In this system the computational routines, the data base for mold design, and the routines for three dimensional modeling are blended together so that the designed mold is obtained as a solid model. For this development, the following problems have been solved. First, the modeling capability of the plastic parts has been implemented by incorporating the modeling routines of a constructive solid geometric modeling system and developing a constant thickness modeling conditions, and that of standard mold bases have been established. Third, the experimental know-how and the empirical formulae have been collected and blended together with the modeling routines of a geometric modeling system to provide the high level commands for designing mold.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.2
• /
• pp.127-137
• /
• 2019

In this study, we have developed a calculation system for BIM-based quantities, 4D process, and 5D construction costs, by integrating object shape attributes and the standard classification system which consist of Cost Breakdown System(CBS), Object Breakdown System(OBS) and Work Breakdown System(WBS) in order to use for the 4 dimensional process control of roads and rivers. First, a new BIM library database connected with the BIM library shape objects was built according to the CBS/OBS/WBS standard classification system of the civil engineering field, and a integrated database system of BIM-based quantities, process(4D), and construction costs(5D) for roads and rivers was constructed. Nextly, the process classification system and the cost classification system were automatically disassembled to the BIM objects consisting of the Revit-family style elements. Finally, we added functions for automatically generating four dimensional activities and generating a automatic cost statement according to the combination of WBS and CBS classification system The ultimate goal of this study was to extend the integrated quantities, process(4D), and construction costs(5D) system for new roads and rivers, enabling the integrated use of process(4D) and construction costs(5D) in the design and construction stage, based on the tasks described above.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.651-661
• /
• 2017

A truss-braced wing (TBW) aircraft has recently received increasing attention due to higher aerodynamic efficiency compared to conventional cantilever wing aircraft. For conceptual TBW aircraft design, we developed a propulsion-and-airframe integrated design environment by replacing a semi-empirical turbofan engine model with a thermodynamic cycle-based one built upon the numerical propulsion system simulation (NPSS). The constructed NPSS model benefitted TBW aircraft design study, as it could handle engine installation effects influencing engine fuel efficiency. The NPSS model also contributed to broadening TBW aircraft design space, for it provided turbofan engine design variables involving a technology factor reflecting progress in propulsion technology. To effectively consolidate the NPSS propulsion model with the TBW airframe model, we devised a rapid, approximate substitute of the NPSS model by reduced-order modeling (ROM) to resolve difficulties in model integration. In addition, we formed an artificial neural network (ANN) that associates engine component attributes evaluated by object-oriented weight analysis of turbine engine (WATE++) with engine design variables to determine engine weight and size, both of which bring together the propulsion and airframe system models. Through propulsion-andairframe design space exploration, we optimized TBW aircraft design for fuel saving and revealed that a simple engine model neglecting engine installation effects may overestimate TBW aircraft performance.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.2
• /
• pp.121-130
• /
• 2008

The concept of integrated product information has been universalized so that many manufacturing industries have applied the concept to their production system. The field of PDM (Product Data Management), which is one of the core components of the integrated product information, is not an exception. Therefore, various PLM (Product Lifecycle Management) software providers are in process of suggesting the PDM solutions. As the PDM solution is widely adopted in the manufacturing industries, the successful application of the solution has been gathering more strength in manipulation of the product information. However, the standardized implementation methodology is stuck in the basic level contrast with the enhanced PDM's functionality and capability. Present study refers to the application of UML (Unified Modeling Language), which is an object oriented modeling description, to PDM system development procedure. The advantage of UML is its efficiency and effectiveness in handling complex requirement often found in PDM implementation works. This paper shows the integration of PDM and UML proposes a philosophy for the support of requirement analysis throughout the full implementation of PDM system.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.133-149
• /
• 1996

In order to reduce the trial-and-errors in design and production of injection molded plastic parts, there has been much research effort not only on CAE systems which simulate the injection molding process, but also on CAD systems which support initial design and re-design of plastic parts and their molds. The CAD systems and CAE systems have been developed independently with being built on different basis. That is, CAD systems manipulate the part shapes and the design features in a complete solid model, while CAE systems work on shell meshes generated on the abstract sheet model or medial surface of the part. Therefore, it is required to support the two types of geometric models and feature information in one environment to integrate CAD and CAE systems for accelerating the design speed. A feature-based non-manifold geometric modeling system has been developed to provide an integrated environment for design and analysis of injection molding products. In this system, the geometric models for CAD and CAE systems are represented by a non-manifold boundary representation and they are merged into a single geometric model. The suitable form of geometric model for any application can be extracted from this model. In addition, the feature deletion and interaction problem of the feature-based design system has been solved clearly by introducing the non-manifold Boolean operation based on 'merge and selection' algorithm. The sheet modeling capabilities were also developed for easy modeling of thin plastic parts.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.602-612
• /
• 2010

In this paper, we propose an object-oriented modeling technique using UML(Unified Modeling Language) for accessibility of user and efficiency of facilities under Web-based integrated manufacturing management system application. For this, we first collect user requirements and related technology of integrated manufacturing system, and then design proposed system considering business flow and various essential design part(class, component, package, use case, and etc) to reduce system risk as well as communicate peacefully between developers in system redevelopments. Additionally, we develop database of manufacturing master code, check management, repair management and error management for proposed systems. Finally, we design and implement our three main modules; manufacturing check module, manufacturing repair module, manufacturing error module under Web-based environments with JSP language.