• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2371-2376
• /
• 2021

As the γ-ray energy increases, a reconstructed image becomes noisy and blurred due to the penetration of the γ-ray through the coded mask. Therefore, the thickness of the coded mask was increased for high energy regions, resulting in severely decreased the performance of the detection efficiency due to self-collimation by the mask. In order to overcome the limitation, a modified uniformly redundant array γ-ray imaging system using dual anti-mask method was developed, and its performance was compared and evaluated in high-energy radiation region. In the dual anti-mask method, the two shadow images, including the subtraction of background events, can simultaneously contribute to the reconstructed image. Moreover, the reconstructed images using each shadow image were integrated using a hybrid update maximum likelihood expectation maximization (h-MLEM). Using the quantitative evaluation method, the performance of the dual anti-mask method was compared with the previously developed collimation methods. As the shadow image which was subtracted the background events leads to a higher-quality reconstructed image, the reconstructed image of the dual anti-mask method showed high performance among the three collimation methods. Finally, the quantitative evaluation method proves that the performance of the dual anti-mask method was better than that of the previously reconstruction methods.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.120-126
• /
• 2009

There are many different types of surface defects on semiconductor Integrated Chips (IC's) caused by various factors during manufacturing process, such as cracks, foreign materials, chip-outs, chips, and voids. These defects must be detected and classified by an inspection system for productivity improvement and effective process control. Among defects, in particular, foreign materials and chips are the most difficult ones to classify accurately. A vision system composed of a carefully designed optical system and a processing algorithm is proposed to detect and classify the defects on QFN(Quad Flat No-leads) packages. The processing algorithm uses features derived from the defect's position and brightness value in the Maximum Likelihood classifier and the optical system is designed to effectively extract the features used in the classifier. In experiments we confirm that this method gives more effective result in classifying foreign materials and chips.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.111-121
• /
• 2008

Using variable speed limits (VSL) is a key strategy for preventing traffic accidents and alleviating traffic congestion. This study proposes an algorithm to operate VSLs on freeways for traffic safety. The proposed algorithm consists of two components based on accident likelihood estimation and analysis of safe stopping distance under various environmental conditions. A binary logistic regression technique is used for estimating accident likelihood. It is expected that the proposed algorithm would be successfully applied in practice in support of an integrated traffic and environmental condition monitoring system. Technical issues associated with the field implementation are also discussed.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.579-588
• /
• 2016

To improve the ability to determine a vehicle's movement information even in a challenging environment, a hybrid approach called non-Gaussian square rootunscented particle filtering (nGSR-UPF) is presented. This approach combines a square root-unscented Kalman filter (SR-UKF) and a particle filter (PF) to determinate the vehicle state where measurement noises are taken as a finite Gaussian kernel mixture and are approximated using a sparse Gaussian kernel density estimation method. During an outage-free GPS period, the updated mean and covariance, computed using SR-UKF, are estimated based on a GPS observation update. During a complete GPS outage, nGSR-UPF operates in prediction mode. Indeed, because the inertial sensors used suffer from a large drift in this case, SR-UKF-based importance density is then responsible for shifting the weighted particles toward the high-likelihood regions to improve the accuracy of the vehicle state. The proposed method is compared with some existing estimation methods and the experiment results prove that nGSR-UPF is the most accurate during both outage-free and complete-outage GPS periods.

• Journal of Radiation Protection and Research
• /
• v.35 no.1
• /
• pp.6-11
• /
• 2010

Embodying the safety of radioactive waste disposal requires the relevant safety criteria and the corresponding stylized methods to demonstrate its compliance with the criteria. This paper proposes a conceptual model of risk-based safety evaluation for integrating complex potential radiation exposure situations in radioactive waste disposal. For demonstrating compliance with a risk constraint, the approach deals with important exposure scenarios from the viewpoint of the receptor to estimate the resulting risk. For respective exposure situations, it considers the occurrence probabilities of the relevant exposure scenarios as their probability of giving rise to doses to estimate the total risk to a representative person by aggregating the respective risks. In this model, an exposure scenario is simply constructed with three components:radionuclide release, radionuclide migration and environment contamination, and interaction between the contaminated media and the receptor. A set of exposure scenarios and the representative person are established from reasonable combinations of the components, based on a balance of their occurrence probabilities and the consequences. In addition, the probability of an exposure scenario is estimated on the assumption that the initiating external factors influence release mechanisms and transport pathways, and its effect on the interaction between the environment and the receptor may be covered in terms of the representative person. This integrated approach enables a systematic risk assessment for complex exposure situations of radioactive waste disposal and facilitates the evaluation of compliance with risk constraints.

• The Korean Journal of Applied Statistics
• /
• v.9 no.2
• /
• pp.83-94
• /
• 1996

The probability of Yut was calculated by using the physical property in previous study, but this article suggested empirical estimators for probability of Yut. In practice, physics-based probability imposes too strong assumptions, which result in the difference between the calculated probabilies and empirical relative frequencies. Experiment shows the probabilities of Yut depend on the integrated shape of Yut rather than the floor type. Maximum likelihood estimator and empirical Bayes estimators are compared and all turn out to be almost identicla for more than 40 trials. For smaller number of trials, Bayes estimators are recommended for its stability. Regression approach is also adopted as an easy-to-use method without empirical trials.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.237-247
• /
• 1999

Flight parameters of a light aircraft in normal category named ChangGong-91 we identified from flight tests. Modified Maximum Likelihood Estimation (MMLE) is used to produce aerodynamic coefficients, stability and control derivatives. A Flight Training Device (FTD) has been developed based on the identified flight parameters. Flat earth, rigid body, and standard atmosphere are assumed in the FTD model. Euler angles are adapted for rotational state variables to reduce computational load. Variations in flight Mach number and Reynolds number are assumed to be negligible. Body, stability and inertial axes allow 6 second-order linear differential equations for translational and rotational motions. The equations of motion are integrated with respect to time, resulting in good agreements with flight tests.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1084-1086
• /
• 2003

The aim of this study is to assess the integrated use of different features extracted from spaceborne interferometric synthetic aperture radar (InSAR) data and optical data for land cover classification. Special attention is given to the discriminatory characteristics of the features derived from the multisource data sets. For the evaluation of the features , the statistical maximum likelihood decision rule and neural network classification are used and the results are compared. The performance of each method was evaluated by measuring the overall accuracy. In all cases, the performance of the first method was better than the performance of the latter one. Overall, the research indicated that multisource data sets containing different information about backscattering and reflecting properties of the selected classes of objects can significantly improve the classification of land cover types.

• Communications for Statistical Applications and Methods
• /
• v.31 no.1
• /
• pp.143-154
• /
• 2024

This paper considers a combined model of exponential smoothing (ETS) and autoregressive integrated moving average (ARIMA) models that are commonly used to forecast time series data. The combined model is constructed through an innovational state space model based on the level variable instead of the differenced variable, and the identifiability of the model is investigated. We consider the maximum likelihood estimation for the model parameters and suggest the model selection steps. The forecasting performance of the model is evaluated by two real time series data. We consider the three competing models; ETS, ARIMA and the trigonometric Box-Cox autoregressive and moving average trend seasonal (TBATS) models, and compare and evaluate their root mean squared errors and mean absolute percentage errors for accuracy. The results show that the combined model outperforms the competing models.

• Information Systems Review
• /
• v.25 no.1
• /
• pp.213-231
• /
• 2023

With the rapid development of live streaming commerce, online host as an information source plays a critical role in affecting live streaming performance. However, the impact of different product types on the relationship between online hosts and live streaming has been less studied. Based on the elaboration likelihood model (ELM) and information source theory, this study aims to empirically investigate what factors influence the sales of live streaming commerce and how product type moderates the relationship between them. The analysis of 11,422 live streaming commerce data collected for four months from October 10, 2021 to February 10, 2022 shows that, among the factors related to source credibility and attractiveness, multi-channel networks (MCN) and the number of followers positively affect the sales volume of live streaming commerce, whereas the reputation score harms the sales. Moreover, the moderating effect of the product type (i.e., ratio of involvement products) on the relationships is confirmed. The findings enrich the literature on live streaming commerce performance. The limitations and future research directions are also discussed.