• Korean Journal of Computational Design and Engineering
• /
• v.19 no.4
• /
• pp.316-323
• /
• 2014

This paper proposes the 3D modeling and simulation technique for predicting the integrated performance of combat vehicle. To consider the practical driving and firing condition of a combat vehicle, the full vehicle model, which can define the six degrees-of-freedom of vehicle motion and various firing angles, is developed. The critical design parameters such as the stiffness and damping coefficient of suspension system are applied to construct the analysis model of vehicle. A simple ballistic model, which incorporates the empirical interior ballistic model and the point mass trajectory model, is built to estimate the firing range and the firing recoil force. To predict the integrated performance and analyze the effect of system parameters, MATLAB/SIM-ULINK model of a combat vehicle for performing the real time simulation is also developed. Several simulation tests incorporating the road bump and the firing recoil force are presented to confirm the effectiveness of the proposed vehicle model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.247-253
• /
• 2013

This paper analyzes ship area network(SAN) with integrated gateway. For the analysis, this paper analyzes reference network architecture, end-to-end connection model, traffic model, and requirement of SAN. Also, the type of network element and minimum performance of integrated gateway is derived by ship area network simulator. The performance evaluation results show that a integrated gateway operating as network switch with performance over than 30,000 packets/sec can provides end-to-end connection with satisfaction of requirement of each end-to-end connection.

• Journal of Positioning, Navigation, and Timing
• /
• v.1 no.1
• /
• pp.51-57
• /
• 2012

In this paper, design of an error model is presented in which the bias characteristic of the MEMS IMU is taken into consideration for performance enhancement of the MEMS IMU-based GPS/INS integrated navigation system. The drift bias of the MEMS IMU is modeled as a 1st-order Gauss-Markov (GM) process, and the autocorrelation function is obtained from the collected IMU data, and the correlation time is estimated from this. Prior to obtaining the autocorrelation function, the noise of IMU data is eliminated based on wavelet. As a result of simulation, it is represented that the parameters of error model can be estimated correctly only when a proper denoising is performed according to dynamic behavior of drift bias, and that the integrated navigation system based on error model, in which the drift bias is considered, provides more correct navigation performance compared to the integrated navigation system based on error model in which the drift bias is not considered.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.2
• /
• pp.67-76
• /
• 2010

Although both functional verification and performance evaluation are necessary for the development of effective and reliable communication systems, they have been often performed independently; by functional modeling with formal language tools and by performance modeling with professional network performance evaluation tools, respectively. Separate and repeated modeling of one system, however, would often result in cost increase and inconsistency between the models. This paper proposes an integrated model design approach in order to overcome this problem that evaluates the performance of a communication protocol designed in SDL with SDL-OPNET model conversion. The proposed technique generates OPNET skeleton code from Tau-generated C code of the SDL model by analyzing the relations between SDL and OPNET models. IEEE 802.2 LLC protocol was used as an example of model conversion to show the applicability and effectiveness of the proposed technique.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.247-257
• /
• 2020

This study aims to examine the effects of integrated performance measurement on firm success of beverage businesses in Thailand. Integrated performance measurement, organizational commitment, organizational citizenship behavior, and firm success are the main variables of the study. In this study, all 653 beverage businesses from Department of Business Development, Ministry of Commerce, Thailand are the samples of the study. The data collection was provided during February - April, 2016. A mail survey procedure via questionnaire was used for data collection. 163 responses were received. Of the surveys completed and returned, 159 were usable. The structural equation model (SEM) is conducted to examine the effects of integrated performance measurement on organizational commitment, organizational citizenship behavior and firm success. The results show that integrated performance measurement positively influences organizational commitment, organizational citizenship behavior and firm success. Organizational commitment positively affects both organizational citizenship behavior and firm success while organizational citizenship behavior positively impacts firm success. In summary, integrated performance measurement as a strategic management accounting approach is a key determinant of firms' business outcome. Firms need to support their resources and capabilities in developing, implementing, utilizing, and maintaining integrated performance measurement. Potential discussion, conclusion, and suggestions and directions for future research are highlighted.

• Korean Management Science Review
• /
• v.24 no.2
• /
• pp.177-196
• /
• 2007

For better predictions and classifications in customer recommendation, this study proposes an integrative model that efficiently combines the currently-in-use statistical and artificial intelligence models. In particular, by integrating the models such as Association Rule, Frequency Matrix, and Rule Induction, this study suggests an integrative prediction model. Integrated models consist of four models: ASFM model which combines Association Rule(A) and Frequency Matrix(B), ASRI model which combines Association Rule(A) and Rule Induction(C), FMRI model which combines Frequency Matrix(B) and Rule Induction(C), and ASFMRI model which combines Association Rule(A), Frequency Matrix(B), and Rule Induction(C). The data set for the tests is collected from a convenience store G, which is the number one in its brand in S. Korea. This data set contains sales information on customer transactions from September 1, 2005 to December 7, 2005. About 1,000 transactions are selected for a specific item. Using this data set. it suggests an integrated model predicting whether a customer buys or not buys a specific product for target marketing strategy. The performance of integrated model is compared with that of other models. The results from the experiments show that the performance of integrated model is superior to that of all other models such as Association Rule, Frequency Matrix, and Rule Induction.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.4
• /
• pp.53-58
• /
• 2014

Vacuum pump transfers waste that is pulverized by integrated macerator. For this reason, unlike ordinary pump systems, there is a rotating macerator ahead of impeller for pulverizing. It is hard to predict numerical solution because area of Inlet flow path changes according to the rotation angle of the integrated macerator. So, in this study, the verification of performance evaluation method of Marine vacuum pump were numerically studied by commercial ANSYS CFX 13.0 software. We select a model of performance evaluation for study, and we analyze change of inlet flow path of integrated macerator according to rotation angle. We generate 5 model sets according to rotation angle of the integrated macerator. And we evaluate their performance by numerical analysis. Then, we analyze internal flow field and performance according to rotation angle of the integrated macerator based on numerical analysis result. In addition, we compared with experimental data for validity of numerical result by using steady state analysis.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.489-498
• /
• 2007

For better predictions and classifications in customer recommendation, this study proposes an integrative model that efficiently combines the currently-in-use statistical and artificial intelligence models. In particular, by integrating the models such as Association Rule, Frequency Matrix, and Rule Induction, this study suggests an integrative prediction model. The data set for the tests is collected from a convenience store G, which is the number one in its brand in S. Korea. This data set contains sales information on customer transactions from September 1, 2005 to December 7, 2005. About 1,000 transactions are selected for a specific item. Using this data set, it suggests an integrated model predicting whether a customer buys or not buys a specific product for target marketing strategy. The performance of integrated model is compared with that of other models. The results from the experiments show that the performance of integrated model is superior to that of all other models such as Association Rule, Frequency Matrix, and Rule Induction.

• Korean Journal of Cognitive Science
• /
• v.35 no.1
• /
• pp.1-21
• /
• 2024

This study investigates the characteristics of visual working memory (VWM) representations by examining two theoretical models: the integrated-object and the parallel-independent feature storage models. Experiment I involved a change detection task where participants memorized arrays of either orientation bars, colored squares, or both. In the one-feature condition, the memory array consisted of one feature (either orientations or colors), whereas the two-feature condition included both. We found no differences in change detection performance between the conditions, favoring the integrated object model over the parallel-independent feature storage model. Experiment II employed a recall task with memory arrays of isosceles triangles' orientations, colored squares, or both, and one-feature and two-feature conditions were compared for their recall performance. We found again no clear difference in recall accuracy between the conditions, but the results of analyses for memory precision and guessing responses indicated the weak object model over the strong object model. For ongoing debates surrounding VWM's representational characteristics, these findings highlight the dominance of the integrated object model over the parallel independent feature storage model.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.4
• /
• pp.369-378
• /
• 2013

This paper presents a vision/LiDAR integrated navigation system that provides accurate relative navigation performance on a general ground surface, in GNSS-denied environments. The considered ground surface during flight is approximated as a piecewise continuous model, with flat and slope surface profiles. In its implementation, the presented system consists of a strapdown IMU, and an aided sensor block, consisting of a vision sensor and a LiDAR on a stabilized gimbal platform. Thus, two-dimensional optical flow vectors from the vision sensor, and range information from LiDAR to ground are used to overcome the performance limit of the tactical grade inertial navigation solution without GNSS signal. In filter realization, the INS error model is employed, with measurement vectors containing two-dimensional velocity errors, and one differenced altitude in the navigation frame. In computing the altitude difference, the ground slope angle is estimated in a novel way, through two bisectional LiDAR signals, with a practical assumption representing a general ground profile. Finally, the overall integrated system is implemented, based on the extended Kalman filter framework, and the performance is demonstrated through a simulation study, with an aircraft flight trajectory scenario.