• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.522-532
• /
• 2017

This paper presents a novel integrated structure for a cascaded distribution static compensator (D-STATCOM) and distribution transformer for medium-voltage reactive power compensation. The cascaded multilevel converter is connected to a system via a group of special designed taps on the primary windings of the Dyn11 connection distribution transformer. The three-phase winding taps are symmetrically arranged and the connection point voltage can be decreased to half of the line-to-line voltage at most. Thus, the voltage stress for the D-STATCOM is reduced and a compromise between the voltage rating and the current rating can be achieved. The spare capacity of the distribution transformer can also be fully used. The working mechanism is explained in detail and a modified control strategy is proposed for reactive power compensation. Finally, both simulation and scaled-down prototype experimental results are provided to verify the feasibility and effectiveness of the proposed connection structure and control strategy.

• Journal of Acupuncture Research
• /
• 제31권3호
• /
• pp.7-18
• /
• 2014

Objectives : The purpose of this study is to find parameters to compare the effects of Sa-Am acupuncture with large intestine tonifying and sedating on radial pulse in healthy subjects. Methods : Sixty healthy subjects participated in this study, divided into large intestine tonifying acupuncture group, large intestine sedating acupuncture group and control group. Radial pulse was measured by 3 dimensional pulse imaging system(DMP-3000) before, right after, 30 minutes after and 60 minutes after acupuncture at Cun, Guan, and Chi in the acupuncture group and in the control group at the same time points. Results : 1. Angle of main peak and magnitude of fourier component significantly changed by integrated analysis of Cun, Guan and Chi. 2. Amplitude of H1, Pulse Power volume / min, elasticity, AIx / HR, Frequency and magnitude of fourier component significantly changed by analysis of Cun, Guan, and Chi. Conclusions : The effect of Sa-Am acupuncture with large intestine tonifying and sedating in healthy human may be observed on time, amplitude, pulse area, augmentation index and fourier components parameters. The parameters analysed in this study may be used to differentiate the effects between Sa-Am acupuncture with large intestine tonifying and sedating on radial pulse. Further studies on the effects of Sa-Am acupuncture using radial pulse are needed.

• Journal of Acupuncture Research
• /
• 제28권6호
• /
• pp.1-17
• /
• 2011

Objectives : This study aimed to review randomized controlled trials of acupuncture performed in South Korea that used sham acupuncture as a control group. Methods : The following databases were searched through the end of September 2011: Koreanstudies information service system (KISS), Korean medical database (KMbase), national discovery OR science leaders (NDSL), oriental medicine advance searching integrated system (OASIS), and research information service system (RISS). The following search terms were used: acupuncture AND (sham or placebo). The reference lists of searched articles and Korea institute of oriental medicine (KIOM) reports(2005~2009) were identified. The following data were extracted: year/first author, disease, number of participants, blinding, intervention, outcome, and result. Where appropriate, we performed meta-analysis. The methodological quality was assessed according to the Jadad scale and 'risk of bias' by Cochrane Handbook procedure. Results : Twenty-nine studies were included in this review. In eighteen studies, penetrating sham controls were used as the control intervention, whereas the remaining eleven studies adopted non-penetrating sham controls such as the Park Sham Device or blunt auricular acupuncture. Nine studies showed statistically significant difference in outcomes. Twelve studies concerning insomnia after stroke, chronic tension-type headache, idiopathic Parkinson's disease, Hwa-Byung, and smoking cessation were included in meta-analysis. A meta-analysis of insomnia after stroke only found significant difference(MD -4.31, 95% Cl -6.19 to -2.42, $p$<0.00001). In general, all of the studies showed low methodological quality(Jadad score: mean 2.1). Risk of bias by Cochrane Handbook procedure varied. Conclusions : The results of this study could not suggest conclusive evidence that acupuncture is more effective than sham acupuncture in several diseases. In the future, more studies with rigorous acupuncture trials using sham controls should be conducted.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.291-296
• /
• 2001

The computerized automation of modern manufacturing system is tremendously important for the cost reduction. Recently, the automation is being realized by Computer Integrated Manufacturing (CIM) concept and the unmanned factory is the final goal of the automation. The automation of the low level of factory is the most crucial and difficult aspect in total CIM environment since various machines are involved. A cell is defined as a manufacturing group of closely related machineries in the entire factory hierarchy, The management scheme for a cell controller is defined from the software viewpoint. The domain of a cell is designed with tasks(processes) in a multiple-task operating system. The operation of the cell is established by defining schemes for overall control of the cell domain, databases, job scheduling, communications within the domain, user-interface and communications with outside machines. Although the software is developed in a specific operating system and WINDOW facilities, the operating strategies can be applied globally.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.263-266
• /
• 1995

Comtputer Aided Process Planning(CAPP) has been emerged as playing a key role in Computer Integrated Manufactunng(CIM) as the most critical link to integrate CAD and CAM. A modified variant CAPP system based on process planning rule base is developed in this paper. This CAPP system generates process plans automatically according to the GT code data provided as input. In order to execute process planning, various process planning rules are constructed in the form of decision tree and the inference engine that extracts the process plan based on the tree-structured rules are implemented.

• Journal of Microbiology and Biotechnology
• /
• 제29권7호
• /
• pp.1104-1116
• /
• 2019

In this study, we investigated the potential of using sediment bioelectrochemical systems (SBESs) for in situ treatment of the water and sediment in brackish aquaculture ponds polluted with uneaten feed. An SBES integrated into a laboratory-scale tank simulating a brackish aquaculture pond was established. This test tank and the control (not containing the SBES) were fed with shrimp feed in a scheme that mimics a situation where 50% of feed is uneaten. After the SBES was inoculated with microbial sources from actual shrimp pond sediments, electricity generation was well observed from the first experimental week, indicating successful enrichment of electrochemically active bacteria in the test tank sediment. The electricity generation became steady after 3 weeks of operation, with an average current density of $2.3mA/m^2$ anode surface and an average power density of $0.05mW/m^2$ anode surface. The SBES removed 20-30% more COD of the tank water, compared to the control. After 1 year, the SBES also reduced the amount of sediment in the tank by 40% and thus could remove approximately 40% more COD and approximately 52% more nitrogen from the sediment, compared to the control. Insignificant amounts of nitrite and nitrate were detected, suggesting complete removal of nitrogen by the system. PCR-DGGE-based analyses revealed the dominant presence of Methylophilus rhizosphaerae, Desulfatitalea tepidiphila and Thiothrix eikelboomii, which have not been found in bioelectrochemical systems before, in the bacterial community in the sediment of the SBES-containing tank. The results of this research demonstrate the potential application of SBESs in helping to reduce water pollution threats, fish and shrimp disease risks, and thus farmers' losses.

• 한국유기농업학회지
• /
• 제22권4호
• /
• pp.561-579
• /
• 2014

This research estimates the necessity of a better governance plan on the purpose of fulfillment energy recovery by building resource recycling system for biomass resources and waste resources that derive from agricultural and mountain village areas. The utilization of new renewable energy technology which uses waste and biomass sources diverse as variety of resources, collecting method, operator etc. and is structurally complicated the formation of policy is also very difficult. There is failure because of the problems which occurs from the policy led by government. Biomass Town Development Project should be made through the central government and the local government integrated support system and should be formed a consultative group in order to process the project mutually with these two department including the experts from the related areas. This consultative group, while government organizations carry out the hub function of strategic knowledge management, should carry out the control tower function to be able to be net working transfer the information with the cooperation of private and government so vitalize the communication area among the related actors. And to be able to increase the participation rate of the local people the consistent and various educations should be given so a smooth business promotion progress will be desired through the change of perception and coactive participation of people.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 가을 학술발표논문집 Vol.28 No.2 (1)
• /
• pp.622-624
• /
• 2001

역할기반 접근통제(RBAC)는 사용자의 역할에 기반을 둔 접근통제 방법으로 Ravi S. Sandhu가 제안한 기본 모델 이후로 다양한 모델들이 제안되어졌다. 하지만, 이 모델들은 다중 응용 환경에 적합한 통합접근통제 시스템 설계에 실제 적용하기 위해서는 보완되어야 할점이 많다. 본 논문에서는 이 모델들의 주요 구성요소를 근간으로 하여 그룹-역할기반접근통제 시스템을 제안하고자 한다. 제안된 시스템은 사용자와 역할지정에 그룹 계층을 사용하고, 조직내의 직위와 직능을 바탕으로 역할 계층을 만들며, 만들어진 역할 계층을 통한 허가의 상속을 허용한다. 또한, 시스템이 가진 접근통제 데이터베이스를 세가지 부분으로 나누어 관리하게 함으로써, 조직의 접근통제 정책의 투명성을 보장한다.

• 한국식품영양학회지
• /
• 제36권1호
• /
• pp.6-16
• /
• 2023

To investigate the anti-inflammatory activity of submerged culture using Cordyceps militaris mycelium, culture-including mycelia was extracted and lyophilized into postbiotics (hot-water extract; CM-HW). HW was fractionated into crude polysaccharide (CM-CP) by ethanol precipitation, and CM-CP was further dialyzed into CM-DCP by dialysis with running water using 12~14 kDa dialysis tube. When the cytotoxicity of subfractions against cells was assessed, no subfraction had a cytotoxic impact that was substantially different from the control groups. In an inflammatory model using LPS-stimulated RAW 264.7 cells, CM-DCP significantly decreased IL-6 and MCP-1 production levels compared to the LPS-control group. CM-DCP also inhibited IL-6 and IL-8 secretion in HaCaT keratinocytes stimulated with TNF-α and IFN-γ. In the meanwhile, the neutral sugar content and mannose ratio of anti-inflammatory CM-DCP were higher than the other fractions, and CM-DCP contained β-1,3/1,6-glucan of 216.1 mg/g. High pressure size exclusion chromatography revealed that CM-DCP contained molecules with a molecular weight range of 5.6 to 144.0 kDa. In conclusion, postbiotics of C. militaris mycelium significantly promoted anti-inflammatory activity, suggesting that neutral polysaccharides including Glc and Man contribute to the anti-inflammation in RAW 264.7 or HaCaT cells.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3648-3658
• /
• 2023

The early localization of a fuel subassembly with a failed (wet rupture) fuel pin is very important in reactors to limit the associated radiological and operational consequences. This requires a fast and reliable system for failure detection and their localization in the core. In the Prototype Fast Breeder Reactor, the system specially designed for this purpose is Failed Fuel Location Modules (FFLM) housed in the control plug region. It identifies a failed sub-assembly by detecting the presence of delayed neutrons in the sodium from a failed sub-assembly. During the commissioning phase of PFBR, it is mandatory to demonstrate the FFLM effectiveness. The paper highlights the engineering and physics design aspects of FFLM and the integrated simulation towards its function demonstration with a source assembly containing a perforated metallic fuel pin. This test pin mimics a MOX pin of 1 cm² of geometrical defect area. At 10% power and 20% sodium flow rate, the counts rate in the BCCs of FFLM system range from 75 cps to 145 cps depending upon the position of DN source assembly. The model developed for the counts simulation is applicable to both metal and MOX pins with proper values of k-factor and escape coefficient.