• 한국정보통신학회논문지
• /
• 제21권8호
• /
• pp.1611-1618
• /
• 2017

최근 해양 환경에서 국방과 관련한 임무를 수행하는 무인수상정(USV, unmaned surface vehicle)의 개발이 활발히 이루어지고 있다. 무인수상정이 해양 환경에서 성공적인 임무를 수행하기 위해서는 선체부, 추진시스템, 조향시스템, 제어시스템, 전원시스템 등을 포함하는 원격/자율 무인수상정 플랫폼이 필수적으로 요구된다. 기존 무인수상정은 기계식 제어 방식을 채택하고 있었지만, 이는 중량 등 여러가지 측면에서의 제약을 가진다. 이러한 문제점을 보완하기 위하여 본 논문에서는 무인수상정의 플랫폼 장비를 전자적으로 제어하기 위한 시스템을 개발하고, 개발한 시스템을 실험하여 유용성을 검증하는 것에 관한 내용을 다룬다. 이를 위해서 제어 명령에 따라 엔진, 워터젯, 전원 등 플랫폼 장비를 제어하기 위한 주 제어 시스템과 엔진 제어장치, 워터젯 제어장치, 전원 제어장치에 관한 시스템 아키텍처를 설계하고, 각 구성 요소를 개발한다. 또한, 개발한 시스템의 수조 실험 및 검증을 위하여 엔진 및 워터젯의 각 구성 요소를 포함하는 테스트베드를 설계 및 제작하였고, 이를 기반으로 실험을 수행하여 개발한 시스템의 유용성을 검증하였다.

• 대기
• /
• 제24권3호
• /
• pp.445-456
• /
• 2014

A real-time quality control system for meteorological data (air temperature, air pressure, relative humidity, wind speed, wind direction, and precipitation) measured by an integrated meteorological sensor has been developed based on comparison of quality control procedures for meteorological data that were developed by the World Meteorological Organization and the Korea Meteorological Administration (KMA), using time series and statistical analysis of a 12-year meteorological data set observed from 2000 to 2011 at the Incheon site in Korea. The quality control system includes missing value, physical limit, step, internal consistency, persistence, and climate range tests. Flags indicating good, doubtful, erroneous, not checked, or missing values were added to the raw data after the quality control procedure. The climate range test was applied to the monthly data for air temperature and pressure, and its threshold values were modified from ${\pm}2{\sigma}$ and ${\pm}3{\sigma}$ to ${\pm}3{\sigma}$ and ${\pm}6{\sigma}$, respectively, in order to consider extreme phenomena such as heat waves and typhoons. In addition, the threshold values of the step test for air temperature, air pressure, relative humidity, and wind speed were modified to $0.7^{\circ}C$, 0.4 hPa, 5.9%, and $4.6m\;s^{-1}$, respectively, through standard deviation analysis of step difference according to their averaging period. The modified quality control system was applied to the meteorological data observed by the Weather Information Service Engine in March 2014 and exhibited improved performance compared to the KMA procedures.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.32-44
• /
• 2015

일반적으로 선박의 운동은 이동운동과 회전운동의 결합으로 이루어진다. 특히 대형 크루즈 선박과 광케이블 포설용 선박, 다이버용 선박 등 특수 선박은 자동 접이안이나 설정된 경로 등을 따라 선수방향의 변화 없이 여러 방향으로 이동만 하는 운동을 재현할 수 있어야 한다. 본 논문에서는 다 추력장치를 가진 선박을 대상으로 조이스틱 명령 기반의 이동운동제어를 실현할 수 있는 통합제어시스템의 구성방법을 제안하며, 이를 실현하기 위하여 필요한 속도명령 생성방법과 대응하는 운동변수 및 이들이 가져야 하는 기준 값 생성방법을 제안한다. 또한 정의된 운동변수의 기준 값을 추종하기 위한 다양한 알고리즘 구성에 대하여 논한다. 또한 통합제어시스템 시뮬레이션 프로그램을 작성하고 이를 토대로 다양한 이동운동 명령에 대한 모의실험을 수행한 후, 시뮬레이션 결과를 바탕으로 제안된 방법의 유효성을 검증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.732-734
• /
• 2004

In this paper, it is suggested and implemented that a new structure of illumination control system using the adaptation control method is to control a number of illuminators. IDs is given to each illuminator controller, the systems are connected in serial, and then the main system controls the on and off of the power supply, intensity of illumination, and a failure check.

• 한국철도학회논문집
• /
• 제6권1호
• /
• pp.1-9
• /
• 2003

This article proposes an integrated systems engineering and safety analysis model for safety-critical systems development. A methodology in system design for safety is considered during the early phase of the development life cycle of systems engineering process. The evolution of the design automation technology has enabled engineers to perform the model-based systems engineering. A Computer-Aided Systems Engineering(CASE) tool, CORE, is utilized to integrate the systems engineering model with a system safety analysis model. The results of the functional analysis phase can drive the analysis of the system safety. An example of Communications-Based Train Control(CBTC) system for an Automated Guided Transit(AGT) system demonstrated an application of the integrated model.

• 품질경영학회지
• /
• 제16권2호
• /
• pp.48-55
• /
• 1988

There have been several papers to illustrate how an information system is used in an automated warehouse system. These papers, however. do not carefully address the role of warehouse planning/control systems nor do they recognize how to integrate the management planning/control systems, and automated warehouse system. This article addresses such issues and shows how a business computer system can be used to integrate and unify the warehouse planning/control systems and the automated warehouse system into it single and highly productive operating system.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1759-1769
• /
• 1989

This paper presents the development of a simulator for an industrial robot. The simulator is characterized by a fully integrated dynamic model and a hardware oriented control scheme. The dynamic model includes the actuator dynamics as well as the manipulator dynamics to integrate the entire dynamics of the robot system. On the other hand, the control scheme is oriented as a hardware structure which is usually implemented in the industrial robot. That is to say, a conventional PI control law is used to regulate the position, the speed, and the current. A Pulse Wave Modulation (PWM)generator modulates the supplied voltage to the actuator. Since the simulator is consistent with the industrial robot system, it provides the essential design concepts for the development process of the robot. In practice, the simulator is applied to the SCARA robot which has been developed in GSIS. Here, it investigates the characteristics and performance of the robot with changing design parameters. Thus, the investigation furnishes criteria for the selection of acfuator, control gain, trajectory planning, etc.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.929-929
• /
• 2005

In this study, computational demonstrations for the flutter suppression are presented for the 3-DOF airfoil system with oscillating flap. Advanced computational methods such as computational fluid dynamics (CFD) and computational structural dynamics (CSD) are used and a simultaneous coupling method has been developed to accurately conduct flutter analyses. In addition, optimal control theory is integrated into the CFD based flutter analysis method to construct the coupled aeroservoelastic analysis system for the airfoil with oscillating flap. For a well-defined typical section model, fundamental unsteady aerodynamics and flutter characteristics are investigated. Finally, to show the effectiveness of flutter control the physical aeroelastic responses are directly compared between the open loop and the closed loop systems.

• 환경영향평가
• /
• 제10권1호
• /
• pp.73-83
• /
• 2001

Web based integrated sewer management system was developed for the analysis of sewer flow and for the optimal operation of sewer works using ArcView and SWMM. SWMM and ArcView were dynamically linked together using Avenue in order to construct user-friendly information management system. The developed system was applied to the residential area in Choonchun city to verify its utilities. All the relevant field data were analyzed on the basis of the developed system, and the modeling of sewer flow was implemented using RUNOFF, EXTRAN, TRANSPORT in SWMM. This system is now in the process of connection to the management system of stormwater, surface and subsurface environment in order to develop an integrated environmental management system. Futhermore, this system will be a critical part of overall control system of sewer works including sewer network and wastewater treatment plant. As this system can provide comprehensive prediction of flow and pollution profiles, it could serve as a tool not only for the optimal management, but also for the decision support system to examine the efficiency of planning and implementation of sewer projects.

• 대한기계학회논문집A
• /
• 제38권3호
• /
• pp.315-321
• /
• 2014

본 논문은 전자제어식 조향 및 제동 장치를 장착한 차량에 대해 고장 안전 기능을 가지는 통합 섀시 제어 시스템을 제안한다. 통합 섀시 제어 시스템에서 상위 제어기는 슬라이딩 모드 제어 이론을 이용하여 제어 요모멘트를 만들어 낸다. 하위 제어기는 가중 의사-역행렬 기반 제어 분배 방법(WPCA)으로 제어 요모멘트를 전자제어식 조향 및 제동 장치의 타이어 힘으로 분배한다. WPCA 의 가변 가중치를 조절하여 구동기 혹은 센서의 고장에 대처할 수 있다. 이러한 상황에서 WPCA 방법으로 가변 가중치를 최적화하여 요모멘트 분배 성능을 향상시키기 위해 시뮬레이션을 이용한 최적화 방법을 제안한다. 제안된 방법의 타당성을 검증하기 위해 차량 시뮬레이션 패키지인 CarSim 에서 시뮬레이션을 수행한다.