• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.211.1-211.1
• /
• 2012

The on-orbit test simulation for predicting the instrument directional responsivity was conducted by the Monte Carlo based integrated ray tracing (IRT) computation technique and analytic flux-to-signal conversion algorithms. For the on-orbit test simulation, the Sun model consists of the Lambertian scattering sphere and emitting spheroid rays, the Amon-Ra instrument is a two-channel including a broadband scanning radiometer (energy channel) and an imager with ${\pm}2^{\circ}$ FOV (visible channel). The solar radiation produced by the Sun model is directed to the instrument viewing port and traced through the dual channel optical train. The instrument model is rotated on its rotation axis and this gives a slow scan of the Sun model over the full field of view. The direction of the incident lights are fed with scanned images obtained from the visible channel instrument. The instrument responsivity was computed by the ratio of the incident radiation input to the instrument output. In the radiometric simulation, especially, measured BRDF of the 3D CPC was used for scattering effects on radiometry. With diamond turned 3D CPC inner surface, the anisotropic surface scattering model from the measured data was applied to ray tracing computation. The technical details of the on-orbit test simulation are presented together with field-of-view calibration plan.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.27.2-27.2
• /
• 2011

The Kepler(NASA) and CoRoT(ESA) space telescopes are surveying thousands of exoplanet for finding Earth-like exoplanets with similar environments of the Earth. Then the TPF(NASA), DARWIN(ESA) and many large-aperture ground telescopes have plan for spectroscopic observations of these earth-like exoplanets in next decades. Now, it has been started to simulate the disk averaged spectra of the earthlike exoplanets for comparing the observed spectra and suggesting solutions of environment of these planets. Previous research, the simulations are based on radiative transfer method, but these are limited by optical models of Earth system and instruments. We introduce a new simulation method, IRT(Integrated Ray Tracing) to overcome limitations of previous method. The 3 components are defined in IRT; 1)Sun model, 2)Earth system model (Atmosphere, Land and Ocean), 3)Instrument model. The ray tracing in IRT is simulated in composed 3D real scale space from inside the sun model to the detector of instrument. The Sun model has hemisphere structure with Lambertian scattering optical model. Atmosphere is composed of 16 distributed structures and each optical model includes BSDF with using 6SV radiative transfer code. Coastline and 5 kinds of vegetation distribution data are used to land model structure, and its non-Lambertian scattering optical model is defined with the semi-empirical "parametric kernel method" used for MODIS(NASA) and POLDER(CNES) missions. The ocean model includes sea ice cap structure with the monthly sea ice area variation, and sea water optical model which is considering non-lambertian sun-glint scattering. Computation of spectral imaging and radiative transfer performance of Earth system model is tested with hypothetical space instrument in IRT model. Then we calculated the disk averaged spectra of the Earth system model in IRT computation model for 8 cases; 4 viewing orientation cases with full illuminated phase, and 4 illuminated phase cases in a viewing orientation. Finally the DAS results are compared with previous researching results of radiative transfer method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.9-14
• /
• 2020

In this paper, Qualification Model of frequency synthesizer is designed for X-band SAR system and performed electrical and environment test. Designed frequency synthesizer generate 13.65 GHz with very low phase noise performance. The integrated phase noise from 10Hz to 1MHz is -37.91 dBc. IRF performances are analyzed according to phase noise and jitter. Also, thermal and structure analysis are achieved for stable operation in space environment. Designed frequency synthesizer is consist of 2 modules of 6U size and generate L-band, C-band, Ku-band. The result of this study would enhance the design ability of RF module and help the frequency synthesizer design for SAR payload system.

• International Journal of CAD/CAM
• /
• v.4 no.1
• /
• pp.1-10
• /
• 2004

Through reviewing and comparing the current virtual shopping malls web sites integrated VR into E-commerce, this paper analyzed both the advantages and disadvantages of two kinds of methods for product presentation: 2D image based and 3D model based presentation method. Using the virtual shopping mall (EasyMall) as a showcase, we presented the architecture of the system and the development technologies, especially those in the mixed presentation method. The presentation and customization methods in the two related modules, including the PhoneShow for mobile phone and EasyShow for textile products, were discussed. It indicated that the integration of E-commerce with VR could provide consumers with virtual experience and intelligent service for business activities. Furthermore, the product presentation methods can be made available for use in different cases.

• Korea Journal of Hospital Management
• /
• v.3 no.1
• /
• pp.34-61
• /
• 1998

A study on cooperative medical treatment system between oriental and western medical practitioners was conducted from March through August 1997 in order to determine a productive model of cooperation of two medical parts for treatment of patients. Questionnaires were distributed to 195 medical doctors(M.D.) and 195 doctors of oriental medicine(O.M.D.) working in clinics and hospitals in six major cities. Statistical analysis tools used for this study were frequency, t-test and multiple regression by using SPSS/P.C package. The results are summarized as follows: 1. The respondents were composed of male docotors(78%) and female doctors(22%) and 68.2% of M.D. and 97% of O.M.D. were interested in the other medical part. The doctors of both disciplines had some limitation on treatment of patients but they were reluctant to refer their patients to other doctors in different discipline. 2. M.D assumed that oriental medicine was more effective for chronic diseases, and O.M.D. thought that western medicine was more effective for acute diseases. 92.3% of O.M.D.s responded that even though they do not utilize western medical technology for diagnosis, they believed the results of diagnoses by western medical technology. 3. 60.5% of O.M. and 93.3% of O.M.D. said that cooperative medical treatment system could be necessary for patients and it would be effective for control of diseases and 69% of western medical doctors and 99% of oriental medical doctors agreed that oriental medical practice would be more effective for cerebellar vascular accidents than other diseases. 77.4% of western medical doctors and 92.3% of oriental medical doctors responded that the students of two different disciplines have to be taught on the other disciplines. 82.6% of western medical doctors and 83.3% oriental medical doctors agreed that it would be necessary to have collaborative research between scientists in two disciplines. 81.5% of M.D.s and 93.3% of O.M.D.s believed that they had prejudice and distrust on other discipline 4.90% of the doctors were not satisfied with the government medical policies on health insurance, legal matters, and health delivery system. 5. 75.4% of M.D.s and 50.2% of O.M.D.s said that two medical disciplines should be integrated, but they were skeptical on that. 75.3% of M.D.s thought that western hospitals should employ O.M.D.s Finally this study recommended that western medical students study oriental medicine and the vice versa, and M.D.s and O.M.D.s should have seminars and workshops to exchange knowledge, and experiences. It is also recommended that medical laws be revised to allow medical doctors refer the patients whom they can not handle to oriental medical doctors and the vice versa.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.13 no.2
• /
• pp.27-36
• /
• 2007

Recently, hospital patients experience anxiety, confusion, and stress about wayfinding as the spacial layout and treatment circulatory system of hospitals have become complicated due to their oversized and complex structure. As part of finding a solution to the problem, this study seeks to examine what are the essential elements of the wayfinding planning of O.P.D. in general hospitals, to develop the model of wayfinding, and to suggest the methods of improving the wayfinding system. The research methods of this study adopted were literature review in wayfinding cognition, plan analysis of ten general hospitals, space analysis of these hospitals through space syntax, analysis of the system of visual-perceptual information through a field study, and analysis of surveys and follow-up surveys conducted to support the results. Based on these results, the proposals for finding decision points, providing the information, and developing a model planning are listed as follows. 1) The comprehensive understanding of O.P.D. spacial layout and the visual-perceptual information system is necessary to find the essential elements of wayfinding. 2) The decision points are found through the full understanding of spacial functions, circulation systems, and facility configuration, considering the spacial layout, the bound of the visual-perceptual information system, and the circulatory system. Furthermore, the information decision points could be confined by space syntax. 3) The checklist and color compound & color codes, developed through the planning of signage system and color system could be applied to the methods of providing the information. 4) The planning of wayfinding system according to the whole process of practices for outpatients was mentioned above. The system of visual-perceptual information developed through the process of this study should be integrated in the spacial layout of the whole O.P.D.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.45-55
• /
• 2008

The objective of this research was to develop a VEPCD (ViscoElastoPlastic Continuum Damage) Model which is used to predict the behavior of asphalt concrete under various loading and temperature conditions. This paper presents the VEPCD model formulated in a tension mode and its validation using four hot mix asphalt (HMA) mixtures: dense-graded HMA, SBS, CR-TB, and Terpolymer. Modelling approaches consist of two components: the ViscoElastic Continuum Damage (VECD) mechanics and the ViscoPlastic (VP) theory. The VECD model was to describe the time-dependent behavior of HMA with growing damage. The irrecoverable (whether time-dependent or independent) strain has been described by the VP model. Based on the strain decomposition principle, these two models are integrated to form the VEPCD model. For validating the VEPCD model, two types of laboratory tests were performed: 1) a constant crosshead strain rate tension test, 2) a fatigue test with randomly selected load levels and frequencies.

• The Journal of Engineering Geology
• /
• v.27 no.2
• /
• pp.119-124
• /
• 2017

The waviness of Large Discontinuity rock is the one of important elements that judges the stability of rock slope. When the waviness of large discontinuity is measured in the field, there are many limitations Therefore this research was carried out to measure waviness of large rock discontinuities using 3D laser scanner to supplement this problem. This research established one 3D model that actual X, Y and Z coordinates through the integrated data gained from one that calculates waviness of base lock using CAD program was compared and analyzed to that of disc-clinometer. As its results, the high reliability of results could be recognized as it belongs to mechanical tolerance $1{\sim}2^{\circ}$ and the results belong to the measured values of Mean DIP and Mean are all within $1^{\circ}$. So, the investigation method of waviness of large discontinuity rock face using 3D laser scanner was verified as more prompt, effective and reliable method than conventional direct site measuring method.

• Journal of Korea Water Resources Association
• /
• v.57 no.3
• /
• pp.165-179
• /
• 2024

It is crucial to have a comprehensive understanding of inundation and water cycle in urban areas for mitigating flood risks and sustainable water resources management. In this study, we developed a Cellular Automata-based integrated Water cycle model (CAW). A comparative analysis with physics-based and conventional cellular automata-based models was performed in an urban watershed in Portland, USA, to evaluate the adequacy of spatiotemporal inundation simulation in the context of a high-resolution setup. A high similarity was found in the maximum inundation maps by CAW and Weighted Cellular Automata 2 Dimension (WCA2D) model presumably due to the same diffuse wave assumption, showing an average Root-Mean-Square-Error (RMSE) value of 1.3 cm and high scores of binary pattern indices (HR 0.91, FAR 0.02, CSI 0.90). Furthermore, through multiple simulation experiments estimating the effects of land cover and soil conditions on inundation and infiltration, as the impermeability rate increased by 41%, the infiltration decreased by 54% (4.16 mm/m²) while the maximum inundation depth increased by 10% (2.19 mm/m²). It was expected that high-resolution integrated inundation and water cycle analysis considering various land cover and soil conditions in urban areas would be feasible using CAW.

• Journal of Satellite, Information and Communications
• /
• v.1 no.1
• /
• pp.12-19
• /
• 2006

In this paper, we propose the bandwidth borrowing scheme which improves the performance of the cal admission control of the integrated GEO satellite networks. In general, target transmission rates of communications and streaming services are fixed, but data services do not have the target transmission rates. Therefore, we can control the transmission rates for data services flexibly according to the system loading situation. When the available bandwidth of the system is insufficient, the bandwidth borrowing scheme gives the bandwidth to request real time services by the transmission rates control of data services through packet scheduler. We make the queueing model for our system model and demonstrate the results through simulations. The simulation results show that there is a 8.7-35.2 dB gain at the total blocking probability according to the use of bandwidth borrowing scheme.