• Nutrition Research and Practice
• /
• v.8 no.5
• /
• pp.589-594
• /
• 2014

BACKGROUND/OBJECTIVES: Turmeric and its active component curcumin have received considerable attention due to their many recognized biological activities. Turmeric has been commonly used in food preparation and herbal remedies in South Asia, leading to a high consumption rate of curcumin in this region. However, the amount of curcumin in the Korean diet has not yet been estimated, where turmeric is not a common ingredient. SUBJECTS/METHODS: This study utilized the combined data sets obtained from the Korea National Health and Nutrition Examination Survey conducted from 2008 to 2012 in order to estimate the curcumin intake in the Korean diet. The mean intake of curcumin was estimated from the amount of curcumin-containing foods (curry powder and ready-made curry) consumed using reported curcumin content in commercial turmeric and curry powders. RESULTS: Only 0.06% of Koreans responded that they consumed foods containing curcumin in a given day, and 40% of them were younger than 20 years of age. Curcumin-containing foods were largely prepared at home (72.9%) and a significant proportion (20.4%, nearly twice that of all other foods) was consumed as school and workplace meals. The estimated mean turmeric intake was about 0.47 g/day corresponding to 2.7-14.8 mg curcumin, while the average curry powder consumption was about 16.4 g, which gave rise to curcumin intake in the range of 8.2-95.0 mg among individuals who consumed curcumin. The difference in estimated curcumin intake by using the curcumin content in curry powder and turmeric may reflect that curry powder manufactured in Korea might contain higher amounts of other ingredients such as flour, and an estimation based on the curcumin content in the turmeric might be more acceptable. CONCLUSIONS: Thus, the amount of curcumin that can be obtained from the Korean diet in a day is 2.7-14.8 mg, corresponding to nearly one fourth of the daily curcumin intake in South Asia, although curcumin is rarely consumed in Korea.

• International Journal of Automotive Technology
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2001

This paper presents further investigation into the effect of over-expansion cycle in a spark-ignition engine. On the basis of the results obtained in previous studies, several combinations of late-closing (LC) of intake valve and expansion ratio were tested using a single-cylinder production engine. A large volume of intake capacity was inserted into the intake manifold to simulate multi-cylinder engines. With the large capacity volume, LC can decrease the pumping loss and then increase the mechanical efficiency. Increasing the expansion ratio from 11 to 23.9 with LC application can produce about 13% improvement of thermal efficiency which was suggested to be caused by the increased cycle efficiency. The decrease of compression ratio from 11 to 5.5 gives little effect on the thermal efficiency if the expansion ratio could be kept constant. Thus, the expansion ratio is revealed to be a determining factor for cycle efficiency, while compression ratio is no more important, which suggests the usefulness of controlling the intake charge with intake valve closure timing. These were successfully explained by simple thermodynamic calculation and thus the mechanism could be verified by the estimation.

• Nutrition Research and Practice
• /
• v.2 no.1
• /
• pp.22-25
• /
• 2008

The purpose of this study was to estimate daily intake of manganese in Korean adults. Manganese intake was estimated through the use of the database of manganese content in frequently consumed Korean foods after first conducting anthropometric measurement and a survey on dietary intake with 354 Korean adults. Average age, height, weight and body mass index were 54.6 years, 165.7 cm, 67.2 kg and $24.5\;kg/m^2$ in males and 53.8 years, 153.7 cm, 59.1 kg and $24.9\;kg/m^2$ in females. The daily energy intakes of subjects were 1740.1 kcal in males and 1432.6 kcal in females. Male and female subjects recorded, respectively, 5.2 mg and 4.1 mg in manganese intake indicating that the male subjects consume more manganese (p<0.001). And they posted, respectively, 3.0 mg and 2.9 mg in manganese intake per 1000 kcal of energy consumption; it turned out that there was no significant difference. Daily manganese intake of both males and females posted, respectively, 148.8% and 135.2% of the adequate intake, and 8 males and 3 females surpassed the tolerable upper intake level. It is suggested that the study for accurate determination of manganese consumption needs to be more diversified based on the database of manganese content in Korean foods.

• Journal of Korean Society on Water Environment
• /
• v.25 no.2
• /
• pp.281-287
• /
• 2009

Achieved monitoring regularly about fishway that is a intake dam belongings to Kyeongchon for 5 years. Result that achieve monitoring, discovered pressing issue of opening and closing degree of discharge control part in fishway. In this research, analyze discharge relation with fishway and intake sluice and presented operation plan of opening and closing of discharge control part. Investigated necessity intake discharge and benefited area to analyze relation of discharge that is flowed in fishway and discharge escaping by intake sluice. When opened discharge control part step by step gradually, analyzed discharge. Compared with survey discharge making ration curve of fishway and intake sluice using orifice and submerged weir formula. Because operation of intake dam is necessary intake discharge and upriver inflow discharge by time, operation uses by survey discharge and calculated opening discharge of fishway by opening discharge of intake sluice via monthly inflow discharge. To sum up, calculated floodgate opening height of fishway by water level to present maintenance standard of intake dam.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.107-115
• /
• 1999

Hydrocarbon emission from spark ignition engines deeply relates with fuel evaporation mechanism. Therefore, fuel evaporation on the back of the intake valve is very important to understand fuel evaporation mechanism during engine warm up period. Intake valve heat transfer model was build up to estimate the amount of fuel evaporation on the intake valve back . Intake valve temperature was measured intake valve temperature is increased rapidly during few seconds right after engine start up and it takes an important role on fuel evaporation. The liquid fuel evaporation rate on the intake valve back proportionally increases as valve temperature increases, however its contribution slightly decreases as intake port wall temperature increases. The fuel evaporation rate on the valve back is about 40∼60% during engine warm-up period and it becomes about 20∼30% as intake port wall temperature increases. The estimation model also makes possible model also makes possible to review the effect of valve design parameters such as the valve mass and seat area on fuel evaporation rate through intake valve heat transfer.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.14-20
• /
• 2018

An estimation law of air mass flow rate for high speed engine control is presented. The variables of mass estimation equations are modified to measurable variables which can be obtained during flight, and the effectiveness of each variable to the estimation accuracy is evaluated. The equation is modified to a simplified form, and the uncertainty is evaluated. In addition, reference data for the selection of estimation methods is suggested by considering the sensitivity analysis of sensor error.

• Journal of Nutrition and Health
• /
• v.30 no.7
• /
• pp.848-853
• /
• 1997

The daily intake of dietary fiber by Korean population in urban and rural areas was computed from an optimized food intake based on national nutrition survey, food balance sheet, and the dietary fiber content of Korean foods. The average intake of dietary fiber the nationwide and in urban and rural areas were 24, 22 and 28g in the 1970's, 20, 21 and 20g in 1980's , and 22, 22 and 21g in the 1990's , respectively. As compared with the recommended dietary allowance of 20-25g for Koreans, the average intake of dietary fiber was within the normal range, regardless of urban and rural areas. Since the dietary pattern of korean people is being changed according to different life style, the exact intakes of dietary fiber by diverse specific population groups should be assessed in the future.

• Journal of Preventive Medicine and Public Health
• /
• v.13 no.1
• /
• pp.3-12
• /
• 1980

Certain heavy metals which may lead peoples to poisonous status are widely used in industry and their uses have been increasing along with rapid industrialization of this country. Such an increasement of metal uses aggravates the status of environmental pollution affecting foodstuffs which are the most important life supporting factor of animal and humanbeing. Concerning the safety measures to minimize food-borne transmission of such hazardous metals, surveillance is the backbone of them and probably more so with a potential problem such as intoxication. Theoretically, this surveillance should include the determination of levels of heavy metal toxicants in foods, the determination of food consumption patterns and typical total diet, and the estimation of total load of the metal contaminant from all sources of exposure including air, water, and occupational sources. In recent year, actually, such estimates on the total daily intake of some heavy metals from foods have been made in several developed countries and a wide variation of date by season, locality, and research method was recognized. Also in this country, this kind of research data is vitally needed to make up for the serious shortage or lack of references to estimate the total amount of heavy metal intake of the people. In this study, a modification model for estimation of the total daily intake of cadmium copper, nickel, zinc, and lead through foods was applied and concentrations of the above metals in crops cultivated in this country were measured with atomic absorption spectro photometer to get the following results. 1. Level of heavy metal concentration in crops Generally, the levels of such metals in essential crops such as rice, cucumber, radish. chinese cabbage, apple, pear, grape, and orange are similar or lower than those in Japan and other developed countries. By the way, a striking result on cadmium concentration was increasement of its concentration in rice from $0{\sim}0.035ppm$ in 1970 to 0.11ppm in this study. However, the value is still far below the. Japanese Permissible Lebel of 1.0ppm. 2. Estimation of total daily intake per capita from foods A new model for estimation was devised utilizing levels of metal concentration in foods, amount of food consumed, and other food factors. Based on the above method, the daily intake of cadmium was estimated to be $70.53{\mu}g/man/day$ in average which was as high as the Limit Value of ILO/WHO(up to $71.4{\mu}g/man/day$). Also, 3.89mg of Zinc, 1.65mg of cuppor, 0.32mg of lead were given as the total daily intake per capita by this research. 3. Efficacy of washing or skinning to decrease the amount of metals in crops After washing the crops sufficiently with commercial linear alkylate sulfonate, the concentration of heavy metals could be reduced to $50{\sim}80%$ showing decreasement rate of $20{\sim}50%$. Also, after skinning the fruits, decreasement rate of the heavy metal concentration shelved $0{\sim}50%$.

• Journal of Nutrition and Health
• /
• v.54 no.1
• /
• pp.95-103
• /
• 2021

Purpose: High intake of cholesterol leads to cardiovascular disruption. Estimating the actual intake of cholesterol can be beneficial for nutrition intervention. This research aimed to develop Semi-Quantitative Food Frequency Questionnaire (SQ-FFQ) to estimate cholesterol intake and analyze its reliability and validity. Methods: SQ-FFQ was developed by sorting high cholesterol food items in Indonesian food database and food items' availability. A total of 30 older adults were randomly chosen from Public Health Center in Jagir District, Surabaya, Indonesia to test its validity. Reliability test was done by measuring the same developed SQ-FFQ in one-month period, while validity test was done by comparing SQ-FFQ results with 6-days food record. Statistical analysis used for reliability test was paired t-test, the Intra-class Correlation Coefficient (ICC), and Cronbach's α to measure the internal consistency. Meanwhile, validity of developed SQ-FFQ was analyzed using paired t-test and Bland-Altman. Results: Reliability of 2 administered SQ-FFQs showed a good agreement based on paired t-test analysis (p = 0.200), ICC (0.609), and Cronbach's α (0.757). Strong agreement was found in most of food items, but agreements for egg yolk and fried duck were poor. Significant difference was found between those food items (p = 0.001 vs. p < 0.001, respectively) with mean difference were -25.3 mg and 46.2 mg. Validity of developed SQ-FFQ2 compared to 6-days food diary records also found a strong agreement based on paired t-test and the Bland-Altman analysis. Conclusion: This baseline research provides a reasonably valid and repeatable measure of cholesterol intake estimation that can be widely used in nutrition and public health study, especially in Indonesia. No study has been conducted in Indonesia on the development of tools to estimate the cholesterol intake.

• Journal of the Korean Society of Food Culture
• /
• v.32 no.2
• /
• pp.162-173
• /
• 2017

This study was conducted to explore portion size estimation by comparing the measurement errors of food and macronutrient intake by photography estimation and 24-hour recall from weighing method. A total of 28 female participants aged 20-24 years old were provided a meal that included rice, chard soup with soybean paste, stir-fried squid, japchae, stir-fried boiled fish paste, lettuce geotjeori, and kimchi. Each portion was measured accurately, and food intake was measured using three dietary assessment methods. For the photography method, trained researchers estimated remaining food amount by analyzing photographs using a mean of four times. The measurement errors for the stir-fried squid and japchae were larger by the 24-hour recall method, while the error for kimchi was larger by the photography method. The correlation coefficients for each food, except chard soup with soybean paste, between the weighing method and photography method were 0.77~0.99 (p<0.001). The correlation coefficients of energy and intake of macronutrients between the weighing method and photography method were 0.85~0.86 (p<0.001). The results of this study demonstrate substantially less measurement error using the photography method than the 24-hour recall method. However, further research is needed to standardize various kinds of foods, photograph angles, serving plates, and serving style for establishment of reliable and valid portion size estimation using the photography method.