• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.769-776
• /
• 1987

A method of on-line recognition of Korean characters (Hangeul) by augmented conterxt free grammar is described in this paper. Syntactic analysis with context free grammar oftern has ambiguity. Insufficient description of relations among Hangrul sub-patterns causes this ambiguity can be determined through repetition of experiments. Flexible syntactic analysis is executed by adapting the condition to the (advice)part of augmented context free grammar. The ratio of correct recognition of this method is more than 99%.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.823-831
• /
• 2008

Since it needs the light computational load and small database, sound source localization method using time delay of arrival(TDOA method) is applied at many research fields such as a robot auditory system, teleconferencing and so on. Researches for time delay estimation, which is the most important thing of TDOA method, had been studied broadly. However studies about factors for time delay estimation are insufficient, especially in case of real environment application. In 1997, Brandstein and Silverman announced that performance of time delay estimation deteriorates as reverberant time of room increases. Even though reverberant time of room is same, performance of estimation is different as the specific part of signals. In order to know that reason, we studied and analyzed the factors for time delay estimation using speech signal and room impulse response. In result, we can know that performance of time delay estimation is changed by different R/D ratio and signal characteristics in spite of same reverberant time. Also, we define the performance index(PI) to show a similar tendency to R/D ratio, and propose the method to improve the performance of time delay estimation with PI.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.25-30
• /
• 2003

Owing to the deterioration of reconstruction and the construction, much of the construction waste is discharged in our construction field. By supplementing aggregate resources that are insufficient by recycling waste concrete, it is considered that the resource-preserving effect according to the saving and reuse of resource as well as eco-friendly effect that is regarded as important in recent industrial society may be expected. In this study conducted an experiment by setting up 15 levels according to the variations in the rate of substitution of recycled coarse aggregate by the water cement ratio(40, 50, 60%). As the result of it, the slump and air contents was increased by ratio of coarse aggregate, and the elapsed characteristics by the ratio of recycled coarse aggregate showed that there is no clear difference in slump and the air contents. Further, in the characteristics of strength development, the lower the water cement ratio, the higher the compressive strength at early ages, compared with crushed stone, while the compression declined according to the increase of substitution rate of recycled gravel as it was tending upward long-term ages.

• Elastomers and Composites
• /
• 제38권4호
• /
• pp.354-362
• /
• 2003

The use of a petaloid design for the bottom of carbonated poly(ethylene terephthalate)(PET) bottles is widely spread. This study investigated the causes of bottom cracks. The tensile yield stress variations of PET according to the crystallinity and stretch ratio were examined, then the stretch ratio and strength in the bottom area of a blown bottle were analyzed. A crack test was also performed to observe the cracking phenomena. The distribution of the effective stress and maximum principal stress were both examined using computer simulation to seek the influence of the bottom design on crack. It was concluded that the bottom cracks occurred because of inadequate material strength due to the insufficient stretching of PET, plus the coarse design of a petaloid bottom. The stretch ratio at the bottom during bottle blowing should be higher than the strain hardening point of PET to produce enhanced mechanical strength. The cracks in the bottom of the PET bottles occurred through crazing below the yield stress. The maximum principal stress was higher in the valleys of the petaloid bottom than in the rest bottom area, and the maximum principal stress had a strong effect on the cracks.

• 한국토양비료학회지
• /
• 제24권2호
• /
• pp.116-123
• /
• 1991

Fenamiphos sulfoxide(f. sulfoxide) 농얍(農藥)의 토양중(土壤中) 흡착측정(吸着測定)에서 적합한 농약용액(農藥溶液)에 대한 토양시료(土壤試料) 비율(比率)과 흡착평형시간(吸着平衡時間)을 결정(決定)하기 위한 시험(試驗)을 수행(遂行)하였다. 시험(試驗)에 사용(使用)한 토양(土壤)은 미국(美國) Hawaii의 Wahiawa 토양(土壤)(3개(個) 토층시험(土層試料))과 California의 Salinas 토양(土壤)(2개(個) 토양시료(土層試料))이었다. 시험(試驗)에 사용(使用)한 농약용액(農藥溶液)대 토양시료비율(土壤試料比率)은 2 : 1과 5 : 1등 2수준이었으며, 흡착평형시간(吸着平衡時間)은 4, 12, 24, 48시간등 4수준이었다. 농약용액(農藥溶液)대토양시료비율(土壤試料比率) 2 : 1에서는 완전한 혼합(混合)이 어려웠으며, 5 : 1이 흡착력(吸着力)이 낮은 Wahiawa 토양(土壤)의 심토(深土)에서 흡착률(吸着率)이 낮아 바람직하지는 못했으나, 혼합(混合)을 고려(考慮)하면 권장되는 비율(比率)이었다. 흡착(吸着)은 4시간(時間)에는 Apparent 평형(平衡)에 도달하고 24시간까지는 서서히 증가하였다. 그후 48시간 까지 빠른 속도로 증가하였는데, 이는 Sulfoxide 화합물(化合物)이 흡착력이 큰 Sulfone 형태(形態)로 변화(變化)되고 있음을 시사한다. 따라서 24시간(時間)의 흡착평형(吸着平衡) 시간(時間)이, 이보다 짧은 시간(時間)에서 불완전한 흡착(吸着)과 이보다 긴 시간(時間)에서 형태변화(形態變化)에 의한 과다흡착(過多吸着)을 고려(考慮)하여, 바람직할 것으로 생각되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.463-471
• /
• 2009

Cemented soils or concrete are usually cured under moisture conditions and their strength increases with curing time. An insufficient supply of water to cemented soils can contribute to hydration process during curing, which results in the variation of bonding strength of cemented soils. In this study, by the consideration of in situ water supply conditions, cemented sand with cement ratio less than 20% was prepared by air dry, wrapped, and underwater conditions. A series of unconfined compression tests were carried out to evaluate the effect of curing conditions on the strength of cemented soils. The strength of air dry curing specimen was higher than those of wrapped cured specimen when cement ratio was less than 10%, whereas it was lower when cement ratio was greater than 10%. Regardless of cement ratio, air dry cured specimens were stronger than underwater cured specimens. A strength increase ratio with cement ratio was calculated based on the strength of 4% cemented specimen. The strength increase ratio of air dry cured specimen was lowest and that of wrapped and underwater cured ones increased by square. Strength of air dry cured specimen dropped to maximum 30% after wetting when cement ratio was low. However, regardless of cement ratio, strength of wrapped specimens dropped to an average 10% after wetting.

• 한국지형학회지
• /
• 제25권2호
• /
• pp.15-29
• /
• 2018

The sediment transport process in a river reflects the process of geomorphological change in the watershed, influencesthe river bed variation and the river channel migration, and is a parametric phenomenon that exhibits a dynamic self-adjusting process. Sediment load is divided into bedload and suspended load depending on the dominant mechanism. Quantitative sediment load is important information for solving river problems. Because it is difficult and time consuming to measure bedload, compared to that ofsuspended load, data on the sediment transport load and the research required for the gravel-bed rivers are insufficient. This study is to analyze the ratio of the bedload to the total sediment load in gravel-bed rivers. The sediment load ratio in gravel-bed rivers increases with the flow rate per unit width, and the rate of the bedload varies more rapidly than the suspended load. The sediment transport efficiency coefficient has been affected by the ratio of the flow depth to the mean diameter of particles and has been dependent on the shear velocity Reynolds number. So $A^{\ast}$ and $B^{\ast}$ are introduced to compensate for the uncertainties such as bed materials, sediment transport, and flow velocity distribution, and the coefficient of bedload ratio has been presented. For the sediment load data in experimental channels and rivers, A* was 3.1. The dominant variables of $B^{\ast}$ were $u_*d_m/{\nu}$ in the gravel-bed and h/dm in the sand-bed. When $B^{\ast}$ the is the same, in the experimental channels the coefficient of bedload ratio was affected by the bed forms, but in the rivers it was of little difference between the gravel-bed and sand-bed.

• 혜화의학회지
• /
• 제15권1호
• /
• pp.161-167
• /
• 2006

In oriental traditional medicine, Cervi Pantotrichium Cornu is used mainly to replenish the insufficient part of our body. Bang-Yak-Hap-Pyun(方藥合編) is a widely used book for clinical herbal prescription. In addition to replenishing what is lacking inside our body, Cervi Pantotrichium Cornu is also used in treating cardiac disease and Gynecological illness. In Bang-Yak-Hap-Pyun, there are 10 prescriptions including Cervi Pantotrichium Cornu only in sang-tong(上統) and it's portion among whole Bang-Yak-Hap-Pyun prescriptions marks 2.14%. In large, dosage of Cervi Pantotrichium Cornu in prescriptions vary 2~160g. It's ratio with other herbs vary 3.57~100%. Also, number ratio with other herb constituent vary 5.26~100%. The references are Yi-Hak-Ib-Moon(醫學入門), Dong-Yi-Bo-Gam(東醫寶鑑), Je-Joong-Sin-Pyun(濟衆新篇), etc.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.425-435
• /
• 1997

One-dimensional thermodynamic mixed layer model to stimulate variations of meteorological variables wish the planetary boundary layer has been developed In this study. This model consists of 2 prognostic equations, which can predict the variations of potential temperature and mixing ratio and several diagnostic equations. Physics within the surface and mixed layers has been considered seperately in the model. For the variations of the model, Its result has been analysed and compared with observated data over Ole Dukyang Bay for one day, July 23, 1992. The simulated height of mixed layer is comparable to the observation and the variations of temperature and mixing ratio in the mixed layer are also reasonably simulated. Those Imply that the model responds appropriately with given boundary conditions In sprite of Its simplilfied assumptions applied to the model and insufficient boundary and Initial conditions.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.397-404
• /
• 1994

Smoke is emitted in diesel engines because fuel injected into the high-temperatured and high-pressured combustion chamber burns with its mixture with insufficient oxygeny. In consideration of air pollution, above all, it is necessary to illuminate the cause of smoke emission in diesel engines. The smoke emission, which is characteristic of diffusion combustion in diesel engines, results from pyrolysis of fuel not mixed with air. Therefore the smoke emission is dependent on diffusion combustion quantity, which is in turn controlled by engine parameter. The study aims at making clear and interpreting the interdependence of smoke emission in diesel engines with heat released within combustion chamber, camparing diffusion combustion quantity according to each engine parameter (air fuel ratio, injection timing, and engine speed), and showing the relation between smoke emission and fraction of diffusion combustion through experiment.