• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.483-484
• /
• 2007

In this paper, we describe a chip design technique for instrumentation amplifier using a nested-chopping technique. Conventional chopping technique uses a pair of chopper, but nested chopping technique uses two pairs of chopper to reduce residual offset and 1/f noise. The inner chopper pair removes the 1/f noise, while the outer chopper pair reduces the residual offset. Our instrumentation amplifier using a nested chopping technique has residual offset under 100 nV. We also implement very low frequency filter. Since this filter needs very large RC time constant, we use a technique named 'diode connected PMOS' to increase R with small die area. The total power consumption is 3.1 mW at the supply voltage of 3.3V with the 0.35um general CMOS technology. The die area of implemented chip was $530um{\times}300um$.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.618-624
• /
• 1999

For many soft ground embankment projects , instrumentation programs for stability and settlement management is being essential . This usually leads to generate large volume of data, which can be used for further research. Database technique is most effective method for data management . Data produced by soft ground embankment instrumentation can not be used by itself but must be reproduced using geotechnical analysis technique. In this study, a intelligent database system for softground called IDSIM was developed to examine applicability intellgent database. . The IDSIM analysis instrumentation data automatically and present results by Web/DB interface successfully.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.165-173
• /
• 2005

Generally, the instrumentation scheme for urban excavation projects consist of a series of tools such as inclinometer piezometer, loadcell, tiltmeter etc. Because almost every equipments are placed along several typical lines, it is impossible to evaluate the whole behavior of structures and adjacent buildings simultaneously. With laser scanning technique developed for surveying, all visible structures are scanned in the form of 3D digital data in a time schedule as planned. It can be analysed effectively the movements for all area affected by excavation even the spots in where no instrumentation tools. Although there are some parts to be refined such as scanning error, proper analysing software, it gives many advantages for realistic instrumentation works in the near future.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.715-718
• /
• 2002

A control strategy for a dynamic system under Irregular disturbance by using stochastic controller is developed. In order to design stochastic controller. system dynamic model in real domain is transformed dynamic moment equation in stochastic domain by F-P-K approach. A study of real time control technique for stochastic controller is presented. The performance of stochastic controller is verified through experiment used by real time control technique method.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.85-96
• /
• 1994

In this study, 24 curved resin blocks were prepared by one of the following four methods: 1) Conventional technique using K-flexo files 2) Step-back technique using K-flexo files 3) Crown-down technique using K-flexo files 4) Canal Master instrumentation using Canal Master Resin blocks were sectioned, photographed, and evaluated the mean centering ratio and the mean area of dentin removed before and after the instrumentation. The results were as follows : I. the mean centering ratio 1. In the level 1 and level 3, there was no significant difference in the mean centering ratio. 2. In the level 2, Step-back technique showed the worst mean centering ratio among the tested groups(p<0.001) and there was no significant difference between the other three groups. 3. In the level 4, Canal Master instrumentation and Step-back technique showed better mean centering ratio than the other two techniques(p<0.001) and there was no significant difference between the two techniques. II. the mean area of dentin removed 1. In the level l and level 3, there was no significant difference in the mean area of dentin removed. 2. In the level 2, Canal Master instrumentation removed less dentin than the other three techniques(P<0.01). 3. In the level 4, Crown-down technique removed less dentin than the other three techniques(P<0.05).

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.291-304
• /
• 1997

The purposes of this study were to evaluate the changes in root canal configuration with canal instrumentation using different file types and techniques and to investigate most appropriate instrumentation technique in maintaining the original canal configuration with different file types. Fifty curved mesiobuccal or distobuccal canals of extracted human maxillary molar teeth were instrumented using a step-back technique with stainless steel K-files or nickel-titanium K-files, a crown-down pressureless technique with stainless steel K-files or nickel-titanium K-files and nickel-titanium engine-driven files. Radiographs were taken before and after instrumentation using a specially designed device that allowed for the pre-and postinstrumentation canals to be taken with the same X-ray angulation. Magnified X-ray images on a magnifier screen were traced and post instrumentation canal images were compared with the preinstrumentation ones. Changes in canal curvature and the incidence of procedural accidents were analyzed. The results were as follows : Crown-down pressureless technique with nickel-titanium K-files and nickel-titanium engine-driven filing produced no significant changes in canal curvature (p>0.05), while the step-back technique with stainless steel K-files or nickel-titanium K-files (p<0.01) and the crown-down pressureless technique with stainless steel K-files (p<0.05) produced significant changes. With nickel-titanium K-file, crown-down pressureless technique produced significantly less changes in canal curvature than step-back technique (p<0.05), while there was no significant difference between techniques with stainless steel K-files (p>0.05). File types exerted no significant influences in the changes of canal curvature both in the step-back technique and crown-down pressureless technique (0>0.05). Regardless of the file types used, step-back technique produced more procedural accidents such as ledge or elbow formation, apical zipping and apical transportation than the crowndown pressureless technique and nickel-titanium engine-driven filing. Both with stainless steel K-files and with nickel-titanium K-files, the incidence of apical extrusion of canal debris was higher in step-back technique than in crown-down pressureless technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2083-2086
• /
• 2004

Variable Structure Controller with effective tracking performance is propose to control micro actuator system. Propsed VSC(Variable Structure Control) technique is implemented to tracking control of comb driving system having high non-linearity. The tracking performance due to VSC technique is compared to conventional PD(Proportional Derivative) control technique, reveals improved results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.252-255
• /
• 2004

This paper presents a new technique to generate the 1-bit signal by decoding Pulse Width Modulation (PWM) signal to a binary file before programming onto the ROM. Since each PWM signal requires only 1-bit digital signal, PWM signal and other forms of digital signal related to multi-bit can be simply generated. The results demonstrate that using this new technique to generate the PWM signal can simplify the process and hardware complication. Moreover, the signal's data and frequency can be easily modified by programming the data onto the ROM and using the counter, respectively, which can reduce the size of the circuit and make the PCB easier.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.440-443
• /
• 1995

A control strategy for random parametic system by using FLC is investigated and developed. In the course of research, as a first part, nonlinear system under random disturbance is investigated. Preliminary results is presented in the paper. A control technique, GA based FLC, is employed successfully for inverted pendulum experiencing white noise excitation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.272-276
• /
• 2004

The conventional PID (Proportional-Integral-Derivative) control technique is widely used for the process control in many industries since it is simple in structure and provides the good response. Nowadays, this control technique has been developed on the Programmable Logic Controller (PLC) to use for the process control loop. However, using this technique is difficult when tuning the PID parameters ($K_p$, $T_i$ and $T_d$) to achieve the best response. Moreover, trial-and-error procedure along with the operator experiences are required to obtain the best results when tuning the PID controller parameters. This paper proposes the self-tuning PID controller based on PLC for the process control in the industries. The proposed self-tuning PID controller uses the PLC-based PID structures to control the process production. The proposed PID tuning utilizes the PLC to synthesize and analyze controller parameter as well as to tune for appropriate parameters using Dahlin method and extrapolation. Experimental results using a self-tuning PID controller to control temperature of the oven show that the controller developed is capable of controlling the process very effectively and provides a good response.