• The Korean Journal of Air & Space Law and Policy
• /
• v.18
• /
• pp.363-384
• /
• 2003

The Military Airbase Law has designated imaginary surface, restricting the height of structure above the imaginary surface. The purpose of establishment of imaginary surface is to promote safety of aircraft operation. However, given the fact that the land is limited, the Military Airbase Law does not set up outer horizontal surface such that the reduced imaginary surface would undermine the safety of aircraft operations with respect to IFR (Instrument Flight Rules) procedures. The fact that some areas which IFR procedures require are not designated as imaginary surface results in no imposition of height restriction on such area. With regard to aviation safety, this article deals with issue of height restriction on area which is beyond the imaginary surface area. This article also examines the establishment of the imaginary surface in the Military Airbase Law, and conducts case study of imaginary surface systems in other country. Based upon this discussion, the current problems posed in the Military Airbase Law will be discussed. To resolve these problems, it is necessary to establish height restriction zone beyond the current imaginary surface area. The provisions of ICAO, FAA and other counties in relation with this issue are referred as well. As a result, many different proposals are suggested, and it is concluded as the most effective proposal that, in certain zone beyond the imaginary surface area, an aeronautic study should be required for the purpose of ensuring aviation safety before a permit of construction higher than prescribed height is issued.

• Archives of Plastic Surgery
• /
• v.42 no.5
• /
• pp.572-579
• /
• 2015

Background Facial rejuvenation can be achieved using a variety of techniques. Since minimally invasive procedures for face lifting have become popular because of their convenience and short operating time, numerous minimally invasive surgical procedures have been developed. In this study, a nonabsorbable polypropylene mesh is introduced as a new face lifting instrument, with the nasolabial fold as the main target area. In this paper, we report the efficacy and safety of a polypropylene mesh in midface rejuvenation. Methods Thirty-three subjects with moderate-to-severe nasolabial folds were enrolled from two medical institutions for a noncomparative single-sample study. A mesh was inserted above the superficial muscular aponeurotic system layer, reaching the nasolabial folds through a temporal scalp incision. After 3 weeks, the temporal end of the mesh was pulled to provide a lifting effect. Then, the mesh was fixed to the deep temporal fascia using nonabsorbable sutures. To evaluate efficacy, we compared the scores on the Wrinkle Severity Rating Scale and a visual analog scale for patient satisfaction between the baseline and 7 weeks postoperatively. In addition, we evaluated safety based on the incidence of adverse events. Results The treatment was deemed effective at improving wrinkles in 23 of 28 cases, and patient satisfaction improved significantly during the study period. There were seven cases of skin or subcutaneous tissue complications, including edema and erythema, but there were no suspected serious adverse events. Conclusions Face lifting using a nonabsorbable mesh can improve nasolabial folds without serious adverse effects. Thus, this technique is safe and effective for midface rejuvenation.

• Safety and Health at Work
• /
• v.4 no.1
• /
• pp.37-45
• /
• 2013

Objectives: As quality of work-life (QWL) among nurses affects both patient care and institutional standards, assessment regarding QWL for the profession is important. Work-related Quality of Life Scale (WRQOLS) is a reliable QWL assessment tool for the nursing profession. To develop a Chinese version of the WRQOLS-2 and to examine its psychometric properties as an instrument to assess QWL for the nursing profession in China. Methods: Forward and back translating procedures were used to develop the Chinese version of WRQOLS-2. Six nursing experts participated in content validity evaluation and 352 registered nurses (RNs) participated in the tests. After a two-week interval, 70 of the RNs were retested. Structural validity was examined by principal components analysis and the Cronbach's alphas calculated. The respective independent sample t-test and intra-class correlation coefficient were used to analyze known-group validity and test-retest reliability. Results: One item was rephrased for adaptation to Chinese organizational cultures. The content validity index of the scale was 0.98. Principal components analysis resulted in a seven-factor model, accounting for 62% of total variance, with Cronbach's alphas for subscales ranging from 0.71 to 0.88. Known-group validity was established in the assessment results of the participants in permanent employment vs. contract employment (t = 2.895, p < 0.01). Good test-retest reliability was observed (r = 0.88, p < 0.01). Conclusion: The translated Chinese version of the WRQOLS-2 has sufficient validity and reliability so that it can be used to evaluate the QWL among nurses in mainland China.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.1-8
• /
• 2014

PURPOSES : The objective of this study is to evaluate the bond strength of asphalt emulsions including polymer-modified emulsions for chip seals and fog seals using the bitumen bond strength (BBS) test. METHODS : For the laboratory testing, the Pneumatic Adhesion tensile Testing Instrument(PATTI) device is used to measure the bond strength between the asphalt emulsion and aggregate substrate based on the AASHTO TP-91. In order to conduct all the tests in controled condition, all test procedures are performed in the environmental chamber. The CRS-2L and the SBS CRS-2P emulsions are used as a polymer-modified emulsion, and then unmodified emulsion, the CRS-2, is compared for the evaluation of chip seal performance. For the fog seal performance evaluation, two types of polymer-modified emulsions and one of unmodified emulsion, the CSS-1H, are employed. For chip seal study, the BBS tests are performed at 30, 60, 120, and 240 minutes of curing times with curing and testing temperatures of $15^{\circ}C$, $25^{\circ}C$, and $35^{\circ}C$. The fog seal tests are conducted at 30, 60, 90, 120, 180 minutes, and 24 hours with curing and testing temperatures of $25^{\circ}C$, $30^{\circ}C$, and $35^{\circ}C$. RESULTS AND CONCLUSIONS : Overall, chip seal emulsions and fog seal emulsions show the similar bond strength trend. At the same testing condition, polymer-modified emulsions show better bond strength than unmodified emulsions. Also, there is no significant difference between polymer-modified emulsions. One of important findings is that the most bond strength reaches their final bond strength within one hour of curing time. Therefore, the early curing time plays a vital role in the performance of chip seals and fog seals.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.2
• /
• pp.129-143
• /
• 2005

The purpose of this study was to verify the validity of Ohio State Teacher Efficacy Scale(OSTES: Tschannen-Moran, 2000) when used with Korean home economics teachers. To achieve this purposes, the surveys with 263 secondary school home economics teachers was conducted by the prime investigator. Statistical procedures included descriptive statistics, factor analysis, internal consistency. Cronbach's a was calculated to test the reliability of items and their internal consistency and Exploratory Factor Analysis(EFA) was conducted to test the structure of each factors with principal analysis and varimax rotation. Confirmatory Factor Analysis(CFA) was conducted to test the factor validity of this scale with AMOS program. The reliability test result of 20 items appeared Cronbach's a=.86. The factor analysis on teacher efficacy with 263 survey of secondary school home economics teachers produced 5 factors including efficacy in classroom management. efficacy in needs assistance, efficacy in instructional strategies, efficacy in environmental assistance and efficacy in teaming assistance. The validity of teacher efficacy scale was moderately verified by the confirmatory factor analyses(GFI=.87, AGFI=.84. CFI=.86. PNFI=.72, RMR=.05. RMSEA=.07). The results lend a support to the teacher efficacy scale as a valid instrument.

• Child Health Nursing Research
• /
• v.4 no.2
• /
• pp.231-244
• /
• 1998

The purpose of this study was to find educational needs of toddler's mother in child-caring experience. The subject of the study was toddler's mother who visited one health care center in J city for immunization and had a child or children between twelve and thirty six months old. The subjects were 37 mothers. The instrument used for this study was a semi -structured questionnaire developed by researcher and based on Objective Content Test of Garretson(1967). The collected data were analized by two researchers using the method of Content Analysis. The results of this study are summarized as follows : 1) Of the large categories, the need of the highest frequency was 'prevention and management of disease and injury', that of the lowest 'growth and development'. 2) In 'physical care' category, 'care of sleeping' was the highest. In 'nutrition and eating-habitual management' category, 'weaning management' was the highest. In 'prevention and management of disease and injury' category, 'disease management' was the highest. In 'discipline and teaching' category, 'discipline' was the highest. 3) In comparison with preceding references, the educational needs of child-caring which had not been shown in preceding references but had been shown in this study were hair-caring, kind of weaning diet, method of cure and nursing, man agement of deformity, and so on. In conclusion, educational needs of toddler's mother in child-caring experience were matter-of-fact and inclusive. Needs in management of special situation such as disease were higher than usual parenting procedure or method. In addition, there were higher needs in questions happened through child-caring experience or confirmation of procedures practicing now. Then, it is suggested that parent education program should be developed on the basis of educational needs found in this study to be more effective in preparing mother's child-caring.

• Korean Journal of Adult Nursing
• /
• v.16 no.1
• /
• pp.82-89
• /
• 2004

Purpose: The purpose of this study was to investigate the effect of nursing education using a CD ROM on the anxiety and knowledge of the patients having minor surgery. Method: Forty patients hospitalized in K hospital in Seoul from April to August 2002 participated in this study. In the experimental group, twenty patients received nursing education on the operational procedures and post-operational care. The control group, received conventional nursing care only. Anxiety experienced by patients was measured by Spielberger's State-Trait Anxiety Inventory, and knowledge was measured by an instrument developed by Rahe et al. The data were analyzed by SPSS statistical program. Result: There were no significant differences in anxiety level between two groups. However, subjects in the experimental group were found to have significantly higher postoperative knowledge levels than those in the control group, and were very satisfied with the CD ROM program. Conclusion: The nursing education program using CD ROM before minor surgery proved to be an effective nursing intervention to increase knowledge of patients and contribute to their self care after discharge. To decrease anxiety of the surgery, the nursing education program should be combined with supprortive emotional nursing intervention, such as touch, and massage.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.8 no.3
• /
• pp.379-390
• /
• 2001

The purpose of this study was to survey the ability of nurses to perform endotracheal suction to provide basic data on correct endotracheal suction. The participants in this study were 181 intensive care unit nurses in two university hospitals and one general hospital located in Daegu, one university hospital and two general hospitals located in Pohang, one university hospital located in Gyeongju. These data were collected from February 1, 2001 to March 10, 2001 using self reported questionnaires. The study instrument, which was developed by these investigators, included questions on general characteristics and performance of endotracheal suction. The results of this study are as follows : 1. Of the Participants 71.3% recognized correct endotracheal suctioning and 23.2% did not. 2. The greatest number, 57.5%, acquired knowledge about endotracheal suctioning at conferences on practice or education for staff. 3 There were significant differences in scores on performance of endotracheal suction according to department (F=2.60, P=.05) and hospitals (F=3.24, p=.01) among the general characteristics. 4. Slightly less than half of the participants, 47.8%, averaged correct scores for endotracheal suctioning procedures. Ventilator $O_2$ supply had the highest score (84.0%), normal saline exchange time, the lowest (14.4%) From the results, we suggest that education is needed to increase the knowledge and correct performance of endotracheal suction. Further study including direct observation of Performance of endotracheal suction is also needed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.91-97
• /
• 2004

As for the former analogue method of photogrammetry, We have obtained final digital drawing by creating the stereo model from overlapped images through orientation process using plotting instrument and processing restitution procedure. However, digital photogrammetry batch processes such using small computer system thus We make an attempt automatization of the procedures. And without the production of stereo model, We could obtain 3D digital data through analysis method. Therefore, an objective of this study was to implement a surveying system that could 3D surveying positions using the digital image to reduce limitations of control point surveying and photographing conditions more efficiently to produce digital drawing. By the result, photogrammetry can practice and make out digital drawing to a computer by digital camera of a comparative low-cost. Small scale area can become practical use to drawing production etc. for facilities management because area can make out digital drawing economically than general surveying.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.455-472
• /
• 2000

Instrumentation for periodontal therapy may induce marginal damage which increases plaque accumulation and result in periodontal disease. But there have not been many reports of instrumentations on the artificial crown so far. Therefore this study is conducted to evaluate the effects of various repeated instrumentations on the porcelain crown marginal portion. Of the 10 extracted periodontally diseased maxillary first premolars, were 12 proximal surface used in this study. The finishing line of the preparation was placed on the root surface below CEJ and then the crown was cast and cemented in usual manner. Every 4 surfaces of the 3 instruments-curet, ultrasonic scaler, and ultrasonic curet- is used. and four samples used in each instruments. The relevant procedures and measurements were repeated 3 times in each surfaces. Marginal gap is measured by the microscope and surface roughness, Scannig Probe Microscope. Measurements are made at 5 points in each surfaces, making 20 points in each instrument. The results evaluated statistically were as follows 1. As instrumentation was repeated, both marginal gap and roughness were increased in all group 2. In the hand curet, marginal gap was increased every instrumentation and roughness was increased after second. 3. In the ultrasonic scaler, both marginal gap and roughness were increased every instrumentation. 4. In the ultrasonic curet, marginal gap was increased after third instrumentation and roughness was increased after second. 5. Marginal gap and roughness used by the ultrasonic curet were lower than the others and no difference was seen between the hand curet and ultrasonic scaler From the results of this study, the ultrasonic curet was useful in some aspect, but careful instrumentation was needed. Furthermore it was important to minimize the instrumentation through complete periodontal therapy before setting and adequate plaque control.