• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.134-141
• /
• 2000

In this study, a scaled model chamber was built to investigate ventilation characteristics of the Under floor Air-conditioning System. Experimental study was performed in model for cargo-oil pump room with inlet and outlet by visualization equipment with laser apparatus. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system(CACTUS'2000) which adopted two-frame grey-level cross correlation algorithm. The flow pattern reveals the large scale counterclockwise forced-vortex rotation from upside louver to lower scupper toward diagonal corner and also found small eddies at bottom layer

• 한국정보통신학회논문지
• /
• 제13권1호
• /
• pp.134-144
• /
• 2009

통합 커뮤니케이션(Ubiquitous/Unified Communication) 플랫폼은 인터넷폰(VoIP), 이메일, 통합메세징, 인스턴트 메시징, 웹컨퍼런싱, 화상회의 등의 다양한 멀티미디어 통신수단을 제공한다. 본 논문에서는 통합 커뮤니케이션 플랫폼의 주요 기능과 구조를 소개하고, PSTN 전화망과의 연동으로 전화망 사용자와의 통화서비스를 지원하는 VoIP 시스템의 구현을 위 한 기능분석과 설계에 관해 연구하였다.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.271-278
• /
• 2020

The investigation into a full-scale 27 m high, by 6 m wide, thermosyphon loop. The simulation model is based on a one-dimensional axially-symmetrical control volume approach, where the loop is divided into a series of discreet control volumes. The three conservation equations, namely, mass, momentum and energy, were applied to these control volumes and solved with an explicit numerical method. The flow is assumed to be quasi-static, implying that the mass-flow rate changes over time. However, at any instant in time the mass-flow rate is constant around the loop. The boussinesq approximation was invoked, and a reasonable correlation between the experimental and theoretical results was obtained. Experimental results are presented and the flow regimes of the working fluid inside the loop identified. The results indicate that a series of such thermosyphon loops can be used as a cavity cooling system and that the one-dimensional theoretical model can predict the internal temperature and mass-flow rate of the thermosyphon loop.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.143-149
• /
• 1999

In this study , the new method which is used by magneticfluid for undercooling ends and continuous ice making is introduced to ice making in the ice stroage system and its validity is studied experimentally . This study made sure how shape control of magniticfluid and instant explosure method can effect on the undercooling degree and it exchange by time change at the moments of undercooling ends and acquired the fundamental knowledge for control method about undercooling ends.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.45.2-45
• /
• 2001

In case that the perfect model following conditions are not satisfied in the system, a perfect model-following controller is difficult to apply to the system. To deal with this problem, in this paper, a robust imperfect stable model-following controller is designed by combining time delay controller and sliding mode controller based on the concept of two degrees of freedom(2-DOF) controller design method. The experimental dynamic modeling of the commercial overhead crane with capacity of two tons is carried out. To remove the noise of the measuring signals from the swing angle measurement device and estimate the state of the swing angles of the transported object at each time instant, realtime tracker is designed using Kalman filter. The performance of the designed robust controller is tested through the commercial overhead. The experimental results show that the designed controller is robust and applicable to real systems.

• 한국태양에너지학회 논문집
• /
• 제32권3호
• /
• pp.19-25
• /
• 2012

About supply and demand to see that you need to match, the limitations of wind power capacity is low demand and the commitment of the general generator will exist between the minimum generation. if the turbine's output can be controlled, The limitation of wind power capacity will be adopted based on instant power generation. Namely, The minimum limits of wind power generation based load operation by calculating the amount that is higher than if the output should be restricted to highest operation. in this paper, we committed to the demand for low enough that the combination of the general generator of wind power capacity to accommodate the operation of determining whether the limit is intended to. For this, power system analysis program PSS/E was used, Jeju system by implementing the model simulations were performed.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제4권9호
• /
• pp.425-430
• /
• 2015

센서 레지스트리 시스템(Sensor Registry System, SRS)은 이기종 센서 네트워크 환경에서 센서 데이터의 즉각적 활용 및 끊김 없는 해석을 위해 사용자에게 센서 메타데이터를 제공한다. 하지만 기존 SRS는 네트워크 연결이 지원되지 않거나 신호가 불안정한 경우에 센서 메타데이터를 안정적으로 제공할 수 없다. 이 논문에서는 이러한 문제를 해결하기 위해, 네트워크 커버리지 정보를 이용한 센서 레지스트리 시스템 확장 방법을 제안한다. 제안 방법은 예측한 경로와 네트워크 커버리지에 대한 오픈 데이터(통신사, 신호 강도, 통신 타입)를 이용하여 사용자가 불안정한 네트워크 지역에 도착하기 전에 해당 지역의 센서 메타데이터를 추가로 송신한다. 이 논문에서 제안한 확장된 SRS는 사용자에게 보다 안정적으로 센서 메타데이터를 제공함으로써 응용서비스의 품질을 향상시킨다.

• 한국항행학회논문지
• /
• 제16권4호
• /
• pp.703-708
• /
• 2012

본 논문은 비선형성이 내재된 모바일 역진자형 로봇 시스템의 제어기 성능을 개선하고, 위치와 속도제어를 위하여 두 개의 다룬 휠로 구동되는 역진자형 타입의 모바일 로봇으로 모델링하였다. 이 시스템은 파라미터의 변화를 실시간으로 체크하고. 제어신호는 여러 상황에서 시스템이 원하는 상태를 유지하도록 변화하게 구성하였고, PI 제어기로 설계하였다. 시스템이 불안정하므로 시스템의 안전성 판별을 통하여 PI 제어기의 게인 값을 설계하였다. 위 실험 결과로서 수동 튜딩 방법 보다 터 좋은 적절한 방법의 성능을 얻을 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.998-1004
• /
• 2007

Connecting a synchronous generator to a power system is a dynamic process, requiring the coordinated operation of many components and systems. The goal is to connect the oncoming generator to the system smoothly i.e without causing any significant bumps, surges, or power swings, by closing the ACB when the oncoming generator matches the power system in voltage magnitude, phase angle, and frequency. If oncoming generator voltage is not matched to the power system voltage, reactive power will flow either into or out of the system at the instant of ACB closure. If this voltage difference is too great, the reactive power flow may result in high transient stresses that could damage the windings of the generator. Also, if oncoming generator frequency is not matched to the power system frequency, transient power will flow between generator and power system. If the frequency difference is too great, the transient power flow is reflected into the prime mover shaft, and this may result in excessive shaft or coupling stress. This paper tries to prove the necessity of correct synchronization for ship generators through a transient phenomenon analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권2호
• /
• pp.515-528
• /
• 2012

The aim of this article is to provide a study on the issue of inventory inaccuracy and to show the manner in which RFID technology can improve the inventory management performance. The objective of inventory control is to monitor the stock flow of merchandises in order to understand the operating profit and loss. A proper mechanism of inventory control could be made to help the profitability. As RFID is applied to inventory control, it can improve efficiency, enhance accuracy and achieve security. In this paper, we introduce the evolution of different mechanisms of inventory control with RFID system-counting method, collect-all method, and continuous monitoring method. As for improving the accuracy of inventory check during business hours, continuous monitoring is the solution. We introduce the infrastructure of the RFID inventory management system based on M2M architecture can make the inventory be efficiently monitored with instant warnings.