• International Journal of Computer Science & Network Security
• /
• 제21권8호
• /
• pp.161-166
• /
• 2021

The term parking management system usually refers to the custom built hardware intensive systems installed in building and malls. However, there are many places where such expensive solutions cannot be installed due to various reasons, like cost and urgent/temporary setup requirements. This project focuses on developing a parking management system based on image processing to detect vacant parking slot in an area where automated systems are not installed. Camera images of the parking area are subjected to image processing algorithm which marks virtual slots in the area and extracts occupancy information to guide the incoming drivers about availability and position of vacant spaces. The application consists of two interfaces: one for the guidance of the incoming drivers and the other one for the administrator. The later interface also informs the administrator if a car is not parked properly in the virtual slot. This parking system would reduce the stress and time wastage associated with car parking and would make the management of such areas less costly.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1504-1506
• /
• 2004

The platform screen door(PSD) hasn't been installed yet within the manual operation system, that is, ATS & ATC Signal system. In other countries, it is mostly installed and operated within automatic operation system, that is, ATO. Especially, as a part of the environment friendly system installation, the installation of PSD shall be considered aggressively to improve the air quality in the underground area and to maintain the air-conditioning. Besides the number of suicides in the subway station gets increased these days causing safety hazard, so the installation of PSD is positively reviewed. To install PSD in the manual operation system, it is important to stop the train at the correct position. So we would like to suggest the technical system thereby.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1855-1857
• /
• 2001

An Inverted-F antenna for the 2.4GHz application is designed and implemented. The antenna is implemented on the PCB board and installed in a vertical position. The 10dB characteristics are 2.4 to 2.48GHz in bandwidth which satisfies the bluetooth requirement and the whole impedance is matched. The feed-line on the PCB board is also calculated and implemented. And the measuring system is installed at the KITI in Kangwon Nat'l Univ. and applied to measured the antenna characteristics. The measured values show that this antenna is suitable for the commercial applications.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.10-12
• /
• 2014

In ISO 10140-5:2010, defines the reverberation time conditions of the receiving room. The sound absorption side of test specimen is installed in the source room generally. In this study, examined at the change in the sound insulation characteristics for the test specimen of asymmetric structure attached sound absorbing material by changing the installed position. A difference of sound insulation performance was maxium Rw 1 dB, it is preferable to place the larger sound absorption area in source room.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2015년도 추계학술대회
• /
• pp.88-91
• /
• 2015

MISSING Malaysia Airlines flight MH370 has not been discovered and unknown whether it crashed on the ground or under the sea. There are a couple of emergency equipment in the airplane not only outside of airplane but inside airplane such as ELT(Emergency Locator Transmitter). Since the ELT developed, it is required to be installed in the airplane for regulation requirement. However, despite of its important function, it is not working properly or shows wide search range for rescue during the crash or ditching on the water. I would like to propose how to over come the up-to-dated position data just before the event. Connecting with ADIRS or GPS which is installed internal airplane system will help to reduce the rescue time for survival passenger.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.291-293
• /
• 2003

Applicability and economical feasibility of a Superconducting Fault Current Limiter (SFCL) have been investigated using the PSS/E simulation for a bus bar coupling at the real 154 ㎸ KEPCO power grid near Seoul. For the investigated substation, the maximum fault current exceeds the interruption rating of 4 circuit breakers (CB) out of 9 installed in the substation. The simulation showed that a SFCL installed in the bus tie position effectively limits the fault currents to save 4 CBs, which are to be replaced by ones of gloater interruption rating, otherwise. We suggest that the optimum resistance of the SFCL be 10 Ohm for the given grid.

• 제어로봇시스템학회논문지
• /
• 제16권5호
• /
• pp.446-455
• /
• 2010

The research presented covers the design and control method of unmanned ground vehicle (UGV). An electric vehicle is used and is driven by DC motor. The power system on the UGV has been adjusted and actuators have been installed for steering and brake automation. A toggle switch is implemented to easily switch between manual and autonomous states. The UGV state is monitored by a velocity sensor, as well as steering and brake position sensors. An emergency stop device was designed and installed to quickly and safely stop the UGV. Different control methods, including the PID controller, were studied for improved steering responsiveness, and results were confirmed through experimentation. Satisfactory performance was achieved and several possible areas of future research have arisen.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2002년도 추계학술발표대회
• /
• pp.321-326
• /
• 2002

To design mechanical ventilation for bathroom of apartment houses where air supply and exhaust are taken Into consideration, mock-ups of ventilation systems, widely used in bathroom of apartment houses with an area of 100$m^2$, were made and installed in a laboratory, These ventilation mock-ups were available for control of air supply and exhaust, and the size of supply openings were 40cm$\times$1cm, 40cm$\times$3cm, 40cm$\times$5cm. They were installed at five positions, spaced 40cm at a height of 25cm from the floor. and the position of exhaust fans were four corners and center Exhaust fan established each one on corner of the ceiling and one in center. As result that measure ventilation effect by each condition, size of hole that supply air is big, and ventilation effect took effect to be good establishment location is low, Also, distance of exhaust fan is far with hole that supply air, ventilation effect took effect by superior thing.

• 한국항공운항학회지
• /
• 제28권4호
• /
• pp.125-131
• /
• 2020

In order to study the correlation between the pilot's cognitive ability and recovery ability by applying a physical element that can cause spatial loss of position to the pilot, a turntable was installed on the top of the motion system to give a quantitative rotational error. We propose a method of simulating flight movement to reduce a difference in feeling and an intuitive method of forward kinematic analysis.