• 한국항해항만학회지
• /
• 제31권1호
• /
• pp.65-70
• /
• 2007

쐐기형 레일클램프는 초기에는 작은 압착력으로 레일을 압착하다가 바람이 불면 쐐기작용에 의해 큰 압착력으로 레일을 압착하는 구조를 가지고 있다. 이 때쐐기작용을 위해 레일클램프는 레일을 따라 이동하게 되는데, 만약 지지대를 설치하지 않으면 밀림거리가 증가하여 구조물을 파괴에 이르게 하는 과부하가 발생하게 되므로 이를 방지하기 위한 지지대를 적절히 설치하여야 한다. 이러한 지지대의 적정위치는 초기압착력과 쐐기각에 따라서 결정되므로, 본 연구에서는 이러한 초기압착력과 지지대의 위치사이의 관계에 대하여 살펴보기 위하여 5가지 쐐기각을 설계변수로 하여 유한요소해석을 수행하였다.

• International Journal of Ocean System Engineering
• /
• 제1권2호
• /
• pp.60-67
• /
• 2011

This paper presents an in-situ correction method to compensate for the position error of an autonomous underwater vehicle (AUV) near the sea floor. AUVs generally have an inertial navigation system assisted with auxiliary navigational sensors. Since the inertial navigation system shows drift in position without the bottom reflection of a Doppler velocity log, external acoustic positioning systems, such as an ultra short baseline (USBL), are needed to set the position without surfacing the AUV. The main concept of the correction method is as follows: when the AUV arrives near the sea floor, the vehicle moves around horizontally in a circular mode, while the USBL transceiver installed on a surface vessel measures the AUV's position. After acquiring one data set, a least-square curve fitting method is adopted to find the center of the AUV's circular motion, which is transferred to the AUV via an acoustic telemetry modem (ATM). The proposed method is robust for the outlier of USBL, and it is independent of the time delay for the data transfer of the USBL position with the ATM. The proposed method also reduces the intrinsic position error of the USBL, and is applicable to the in-situ calibration as well as the initialization of the AUVs' position. Monte Carlo simulation was conducted to verify the effectiveness of the method.

• The Journal of Advanced Prosthodontics
• /
• 제15권3호
• /
• pp.126-135
• /
• 2023

PURPOSE. The aim of this study was to evaluate the reliability of implant stability measuring devices depending on the location of the implant and the position of the patient. MATERIALS AND METHODS. Six implants were installed in different dentate sextants of six artificial bone models. Implant stability was measured in three conditions of the bone model (without mounting on a phantom head, mounted on a phantom head in supine position, and mounted on a phantom head in upright position). A resonance frequency analysis device (Osstell) and two damping capacity analysis devices (Periotest and Anycheck) were used to measure implant stability. The values measured outside the phantom head were treated as controls, and the values inside the phantom head were compared using an independent t-test. RESULTS. Osstell showed different results in two of the six divisions in both the supine and upright positions compared to outside of the mouth (P < .05). Periotest showed different results in all six parts in the supine position and in five parts in the upright position compared to outside of the mouth (P < .05). While Anycheck showed different results in five areas in the supine position compared to outside of the mouth, it showed different results in only one area in the upright position (P < .05). CONCLUSION. In the difficult implant position for the operator to access, the implant stability measuring devices show less reliability. The accessibility of implant is greatly affected in the order of Osstell, Anycheck, and Periotest.

• 복식
• /
• 제58권6호
• /
• pp.12-23
• /
• 2008

This study reports the costume changes and the factors of the changes from stone status in joseon dynasty. It can be summarized as follows: First, the artisan for the statues is one of the most important factors for the costume changes. The artisans who were involved in building the King's tomb were also made the stone statues for scholars' tombs. This results in that the style of the King's tomb influenced the costumes of stone statues for scholars' tombs. Some craftsmen who were buddhist monks also influenced the introduction of buddhist arts. Second, the stone statues are classified into 3 types according to the dead's social position: the civil officer statues, the military official statues, and the servant statues are installed for the civil officer, the military officers, and others, respectively. This principle was applied well. However, the civil official statues are mainly installed in late joseon dynasty because the civil officers are socially preferred to the military officers in late joseon dynasty. Third, there are two types of civil officer statues; Gongbok type and jobok type. Civil officer statues of Gongbok type were mainly installed in early joseon dynasty and civil officer statues of jobok type were begun to be installed in the early 16th century. Civil officer statues of Gongbok type were fade out after the late 17th century. Fourth, there are three reasons why civil officer statues of jobok type were installed at the officers's tombs 270 years earlier than at the Kings' tombs: 1) Introduction of Daemyunghoejeon and its application, 2) an establishment of a system that requires to prepare jobok individually, and 3) self-confidence of scholars' class on political and cultural maturity.

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.49-56
• /
• 2006

도시지역의 우수를 배제하기 위한 방법으로 토구를 이용하여 하천으로 방류하고 있다. 그러나 이러한 토구를 설치 할 때 국내설계기준에는 어떠한 기준이나 제안이 없이 설계자나 시공자의 임의로 만들어 지고 있는 실정이다. 본 연구에서는 토구를 설치하는 방법에 대한 기초적인 자료를 제공하기 위하여 토구 방류 유량에 따른 흐름 변화 및 설치 각도, 돌출정도, 그리고 설치 위치에 따른 흐름변화를 실험을 통하여 분석함으로써 흐름에 보다 영향을 적게 미치는 토구설치 방법을 제안하였다. 총 10가지 경우에 대한 실험을 통하여, 같은 유량을 방류함에 있어서 한 곳으로의 방류보다는 상.하류 등으로 분리하여 방류하는 것이 흐름에 영향을 적게 미치는 것으로 나타났으며, 설치 각도 및 돌출에 따라 상류지역의 수위 상승 및 유속 감소 등의 현상이 나타나 토구 설치 시 보다 신중하고 흐름에 방해가 되지 않는 방향으로 설치할 수 있는 방안을 강구해야 한다.

• 한국철도학회논문집
• /
• 제19권2호
• /
• pp.124-134
• /
• 2016

철도 선로에 근접하여 설치하는 근접 저상 방음벽은 방음벽 높이를 저감시키기 위한 방안으로 외국에서는 많은 연구가 수행되고 있으나 국내에서의 연구는 매우 미흡한 실정이다. 본 논문에서는 근접 저상 방음벽의 음향특성을 파악하고자 축척 모형을 제작하여 성능평가를 수행하였다. 실험결과, 'ㄱ'자형 방음벽 설치 시에는 방음벽의 안쪽뿐만 아니라 상부에도 흡음재를 설치하는 것이 삽입손실의 개선효과가 있는 것으로 분석되었고, 방음벽의 삽입손실 평가를 위해 단순한 경험식 대신에 경계요소법과 같은 보다 해석적인 방법으로 삽입손실을 예측할 필요가 있다. 또한, 흡음재를 부착한 근접 방음벽을 설치하면 승객 위치에서의 소음 증가현상은 미미한 것으로 분석되었다. 그리고, 근접 방음벽의 음향성능 예측을 위해 2차원 경계요소법을 이용한 소음해석을 수행하였으며, 측정결과와의 비교 분석을 수행함으로서 예측 프로그램의 활용 가능성을 검증하였다.

• 설비공학논문집
• /
• 제17권7호
• /
• pp.620-628
• /
• 2005

The blinds in the intermediate space are installed to block the direct solar radiation. As the blind divide the airflow of intermediate space into two, thermal performance of Double-Skin Facade (DSF) are affected by the blind position. Therefore blind position should be planed with careful consideration in order to maximize the thermal performance of DSF. In this study, CFD was peformed to analyze the effect of blind position in multistory-type DSF in variation of other DSF elements. The simulation results showed that the case with narrow depth of intermediate space and outlet on upper side of outer-facade, it is profitable to place blind as close as possible to the outer-facade. In the other cases, the blind should maintain 0.15 m distance from outer-facade.

• 한국추진공학회지
• /
• 제12권2호
• /
• pp.1-7
• /
• 2008

연소실내 음향 감쇠를 위해 장착되는 반파장 공명기의 반경 방향 위치 효과를, 상온에서의 선형 음향 실험을 통해 실험적으로 연구하였다. 음향 감쇠의 정량화를 위해 감쇠 인자를 사용하였다. 감쇠하고 하는 음향 모드에 대해 공명기가 최적의 길이를 갖는 경우에는, 반경 방향 위치의 증가에 따라 음향 감쇠 효과가 증가하였다. 또한, 감쇠 인자의 변화 추이는 감쇠시키고자 하는 음향 모드의 진폭 변화 추이와 유사하였다. 장착 위치가 장착면의 중심에 접근할수록 음향 감쇠 효과가 감소할 뿐만 아니라 분사기 길이와의 상관성토 감소하였다. 한편, 공명기가 비최적 길이를 갖는 경우에는, 반경 방향 위치 효과가 거의 나타나지 않아 위치와 무관한 감쇠 인자값을 관찰할 수 있었다. 공명기의 길이와 위치에 따라 감쇠 성능을 평가하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.847-852
• /
• 2009

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feed-water heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare wall thinning range according to change entrance nozzle diameter and position with reference numerical analysis model's wall thinning range, various numerical analysis models applied. In case of changing diameter, four different diameter is applied. And a side of nozzle position, two different position-vertical type and parallel type-is applied. And then this paper describes operation of numerical analysis which is composed similar condition with real feed water heater. In conclusion, this study shows effective design for shall wall thinning by changing nozzle diameter and position.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.333-343
• /
• 2000

An automatic guidance system for combine was designed to harvest paddy rice by following a predetermined path. The automatic guidance system consisted of DGPS to locate position of combine, a gyro sensor system to measure heading angle, ultrasonic sensors to detect obstacles, a hydraulic system, microcomputer as a controller, and I/O interface system. Hydraulic cylinders and valves were installed to control movement of the combine. The heading angle and the position of the combine, and ultrasonic measurements from edge were used as the inputs of the controller. The operating position of hydraulic cylinder was determined as output of the controller. The automatic guidance system was evaluated at the 45-m straight path by changing the posture of the combine. The average RMS errors were 14.0 cm without offset and 15.0 cm with 1-m offset. The DGPS provided accurate position information within the limited error to guide the combine in the field. The results showed that the automatic guidance system could guide the combine autonomously in the paddy field when the posture of the combine was changed.