• 한국터널지하공간학회 논문집
• /
• 제14권1호
• /
• pp.1-22
• /
• 2012

본 논문은 도로터널에 설치하는 물분무소화설비가 피난성능을 개선시키는지를 검증하는 연구이다. 검증의 절차와 방법은 '도로터널 방재시설 설치 및 관리지침'에 따라 수행되었다. 3종류의 화재크기와 27개의 화재시나리오에 대한 화재 평가와 피난 평가를 실시하였다. 결과는 물분무소화설비가 설치된 경우와 설치되지 않은 경우로 구분하여 제시하였다. 물분무소화설비는 27개 시나리오 중에서 26개에서 물분무소화설비가 없는 경우에 비해 사망자가 감소하였다. 물분무소화 설비가 설치되지 않은 경우의 사회적 위험도는 홍콩과 네델란드 기준에서는 수용할 수 없는 범위였다. 반면 물분무소화설비가 있는 경우에는 사회적위험도가 ALARP 범위였다. 결과적으로 물분무소화설비가 있는 경우에는 없는 경우와 비교해서 1명, 10명, 100명 이상의 사망 빈도가 각각 50배, 100배 및 4배로 감소하였다. 결과적으로 물분무소화설비는 도로터널 화재 시 고온기류의 냉각작용과 독성가스의 세척효과를 통해 피난에 유리한 환경을 조성한다는 것을 확인하였다.

• Smart Structures and Systems
• /
• 제26권5호
• /
• pp.575-589
• /
• 2020

For vibration control of stay cables in cable-stayed bridges, viscous dampers are frequently used, and they are regularly installed between the cable and the bridge deck. In practice, neoprene rubber bushings (or of other types) are also widely installed inside the cable guide pipe, mainly for reducing the bending stresses of the cable near its anchorages. Therefore, it is important to understand the effect of the bushings on the performance of the external damper. Besides, for long cables, external dampers installed at a single position near a cable end can no longer provide enough damping due to the sag effect and the limited installation distance. It is thus of interest to improve cable damping by additionally installing dampers inside the guide pipe. This paper hence studies the combined effects of an external damper and an internal damper (which can also model the bushings) on a stay cable. The internal damper is assumed to be a High Damping Rubber (HDR) damper, and the external damper is considered to be a viscous damper with intrinsic stiffness, and the cable sag is also considered. Both the cases when the two dampers are installed close to one cable end and respectively close to the two cable ends are studied. Asymptotic design formulas are derived for both cases considering that the dampers are close to the cable ends. It is shown that when the two dampers are placed close to different cable ends, their combined damping effects are approximately the sum of their separate contributions, regardless of small cable sag and damper intrinsic stiffness. When the two dampers are installed close to the same end, maximum damping that can be achieved by the external damper is generally degraded, regardless of properties of the HDR damper. Field tests on an existing cable-stayed bridge have further validated the influence of the internal damper on the performance of the external damper. The results suggest that the HDR is optimally placed in the guide pipe of the cable-pylon anchorage when installing viscous dampers at one position is insufficient. When an HDR damper or the bushing has to be installed near the external damper, their combined damping effects need to be evaluated using the presented methods.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.317-322
• /
• 1994

The design and performance verification of collocated capacitance sensor system for magnetic bearing is presented. Noncollocation between actuators and sensors may cause unstable rotor behavior. The capacitance sensor is not affected by magnetic field. PCB type capacitance sensor is installed between magnetic bearing polse. so, collocation of sensors and actuators can be achieved. Experiment of sensor's static and dynamic charactistics is conducted. Modeling of the rotor system supported by magnetic bearing is made. And performance comparison between simulation and experiment is showed.

• 지식정보인프라
• /
• 통권7호
• /
• pp.134-140
• /
• 2001

To know about the performance of KREONET, we installed an active network performance measurement tool, PingER. For customization, we modified its architecture and some codes. Although this customization is a minor change of PingER, it gives much benefit and convenience for both operators and users. Using PingER, we can measure the effect of the STAR TAP link. The new networking through the link is a little bit slower than the previous networking. But the new link shows far fewer packet losses and provides more reliable networking.

• 대한설비공학회지:설비저널
• /
• 제12권4호
• /
• pp.219-226
• /
• 1983

Cyclic heating performance of 3 ton air-to-air unitary heat pump installed in a residence in the Washington, D.C. area was determined by applying the bin method to field test result. Cyclic degradation coefficient Cn of heat pump may be expressed in terms of heating load factor HLF as the following : $$C_D=\frac{1-HLF^m}{1-HLF}$$ where $$C_D{\ge}m$$ The less is the value of exponent m, the better is, the performance of a heat pump, depending upon the heat pump design.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권1호
• /
• pp.64-70
• /
• 2023

본 연구에서는 1.04배 드릴비트 직경 및 1.02배 드릴비트 직경 시 앵커의 신뢰성시험을 수행하였다. 각 변수별 시험을 통해 앵커의 표준편차 및 변동계수를 검토하였고, 기준시험 결과와 비교 평가하였다. 1.04배 드릴비트 직경을 가진 M12 및 M16 앵커의 신뢰성시험결과, 극한 인장하중 허용기준 변동계수 값인 20% 이내의 값을 나타내어 시험기준을 만족하였다. 또한, 1.04배 드릴비트 직경을 가진 앵커의 성능은 기준시험 대비 M12 앵커는 약 74%, M16 앵커는 약 55% 정도로 나타나 앵커의 내력이 다소 부족한 성능을 나타냈지만, 설계강도 대비 약 253% 및 210%로 나타나 1.04배 드릴비트 직경에 설치된 앵커의 인발성능은 충분히 확보하고 있음을 알 수 있었다. 1.02배 드릴비트 직경을 가진 M12 및 M16 앵커의 신뢰성시험결과, 극한인장하중 허용기준 변동계수 값인 20% 이내의 값을 나타내어 시험기준을 만족하였다. 또한, 1.02배 드릴비트 직경을 가진 앵커의 성능은 기준시험 대비 M12 앵커는 약 48%, M16 앵커는 약 53% 정도로 나타나 다소 부족한 성능을 나타냈지만, 설계강도 대비 약 136% 및 168% 로 나타나 1.02배 드릴비트 직경에 설치된 앵커의 인발성능은 충분히 확보하고 있음을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2206-2210
• /
• 2007

As a power transmission line supplying power to a densely populated city, the high temperature superconducting (HTS) cable is expected to one of the most effective cables with a compact size because of its high current density. The verification of HTS power cable system have been progressed by KEPRI. A cooling system for a 3-phase 100m HTS power cable with 22.9kV/1.25kA was installed and tested at KEPCO's Gochang power testing center in Korea. The system consists of a liquid nitrogen decompression cooling system with a cooling capacity of 3kW and a closed circulation system of subcooled liquid nitrogen. Several performance tests of the cable system with respect to the cooling such as cooling capacity, heat load and temperature stability, were performed at several temperatures. Thermal cycle test, cool-down to liquid nitrogen temperature and warm-up to room temperature, was also performed to investigate thermal cycle influences. The outline of the installed cooling system and performance test results are presented in this paper.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.170.1-170.1
• /
• 2010

Performance of water-to-air heat pump using raw water has been analyzed under part load heating operation in March, 2010. The water source heat pump of 30 RT was installed for 24 hours cooling and heating ventilation, and the gravity inflow water from Daechung dam is used as the heat source. The daily averaged water and air temperatures are $5.7^{\circ}C$ and $9.9^{\circ}C$ respectively, and the heat pump is operated under part load condition for 7.5 hours in 24 hours. The daily averaged heat pump COP calculated with heat transferred from the brine water is 2.49 and the monthly averaged COP is 2.25 in March. Based on the database of the California Energy Commission, the monthly averaged COPs of air source heat pumps installed in U.S.A. are 1.97 in March and 2.03 in April. Therefore it is confirmed again that the performance of the heat pump using raw water is better than that of air source heat pumps.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1125-1128
• /
• 2007

In order to improve the acoustic performance of a noise barrier without increasing its height, various type of acoustic devices are suggested but, there is no proper method to estimate the performance in Korea. For this, an outdoor test facility was established in Expressway and Transportation Technology Institute(ETTI) of Korea Expressway Corporation for testing the acoustical performance of noise reducing devices installed on the top of a noise barrier. Noise measurements before and after installation of the noise reducing devices were carried out by using sound pressure level for long distance range from the barrier, from 10m to 40m. For considering the directivity effects of noise reducing devices, multivariate regression analysis was attempted.

• 상하수도학회지
• /
• 제29권4호
• /
• pp.519-531
• /
• 2015

It has been widely accepted that the pressure management of water distribution systems using pressure reducing valves(PRVs) would be an effective method for controlling leakages. A pressure reducing valve (PRV) regulates outlet pressure regardless of fluctuating flow and varying inlet pressure, thereby reducing leakage and mitigating the stress on the water distribution system. However, the operation of a PRV is vulnerable to its mechanical condition and hydraulic operability. In this research, the effect of PRVs installed in water distribution system are evaluated in terms of hydraulic pressure reduction and mechanical performance by analyzing measured pressure data with statistical approach. A statistical approach using the moving average filter and frequency analysis based on fourier transform is presented to detect abnormally operated PRVs that have been densely installed in water distribution system. The result shows that the proposed approach can be a good performance evaluation method by simply measuring pressures for the PRVs.