• 제목/요약/키워드: Installation equipment

검색결과 920건 처리시간 0.024초

건물의 변전설비 손실 실태조사 및 분석에 관한 연구 (A Study on Substation equipment Loss Actual State Investigation and Analysis of Office Building)

  • 유현재
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제6권3호
    • /
    • pp.57-62
    • /
    • 1992
  • In this paper, the reasonable design standard of Demand Factor for large office buildings is introduced that was made by the statistical way considering actual conditions, such as investigated electrical equipment capacity, electrical power consumption, etc. The results are as follows. 1) It is shown that th saving of electrical equipment investment, the decrease of power loss, the improvement of facilities utilization and the decrease of electrical power rates can be contributed by the application of the design standard. 2) The effect of reduction is showed to confirm the practical use of the proposed reference Demand Factor, and also, it is believed that this proposed reference Demand Factor will be useful in electrical equipment operation and planning.

  • PDF

주요시설의 전자파 안전성 확보를 위한 전자파적합성(EMC) 기술 (Trends in Electromagnetic Compatibility (EMC) Technology to Secure Electromagnetic Safety in the Critical Facilities)

  • 권종화
    • 전자통신동향분석
    • /
    • 제33권3호
    • /
    • pp.41-50
    • /
    • 2018
  • In order to ensure the electromagnetic safety of a complex facility equipped with a variety of electric and electronic equipment, the European Union (EU) has enacted and applied the Electromagnetic Compatibility Directive (EMC Directive 2004/108/EC) to a fixed installation. This paper introduces the regulations and techniques related with electromagnetic compatibility (EMC) engineering applied to a fixed installation, which is used to prevent a malfunction of critical equipment and systems caused by unwanted electromagnetic waves and to operate the facilities with stability.

고속차량 ATP시스템 개량의 최적화에 관한 연구 (Research about optimal installation of ATP system in High speed Rolling-stock)

  • 유병관
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2009년도 춘계학술대회 논문집
    • /
    • pp.476-482
    • /
    • 2009
  • A signal equipment improvement project for the existing facility ATS to ATP is under construction in Kyung-Bu and Ho-Nam commercial line including 400 rolling stocks. But there was a concern for the interface between KTX OBCS and ATP from the beginning of the project. At present, this is the front burner event. This paper introduces interface checking and predicted failure point between KTX OBCS and ATP improvement system. Through this measure the optimal installation of the ATP will be possible. The study was made under maintenance efficiency including reliability because the KTX signal equipment must qualify the above condition.

  • PDF

GPS 및 무선통신을 이용한 철도신호설비 기능향상 (Improvement of the Railroad Signalling Equipment using GPS and Wireless Telecommunication)

  • 최규형;최대섭
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2004년도 춘계학술대회 논문집
    • /
    • pp.460-462
    • /
    • 2004
  • This paper gives a basic data of improving the performance of railroad signalling equipment by adopting GPS and wireless telecommunication technologies. These approach enable the moving block control of train, which can optimize train operation by reducing the distance between trains and maximize the railroad capacity. These method of detecting train position and controling train movement can also improve the train route control at stations.

  • PDF

StrongARM을 이용한 원격 감시시스템 (Remote Monitoring Systems Using StrongARM)

  • 임홍식;남현도;강철구
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2003년도 학술대회논문집
    • /
    • pp.259-264
    • /
    • 2003
  • In this paper, web based monitoring systems are implemented using embedded Linux. The external equipment is controlled via HTTP protocol and web browser program. HTTP protocol is ported into Linux. A micro web server program and external equipment control program are installed on-board memory using CGI to be accessed by web browser. Experimental result of the proposed web based monitoring systems can be used in automation systems and remote distributed control via internet using web browser.

  • PDF

엘리베이터의 전원품질용 기기 설치 현황 및 오동작에 관한 조사 (The Research for Malfunction and Installation Status of Power Quality Counterplan Equipment of Elevator)

  • 김기현;이건호;배석명
    • 조명전기설비학회논문지
    • /
    • 제20권10호
    • /
    • pp.107-113
    • /
    • 2006
  • 엘리베이터 갇힘 사고 절대 건수가 매년 증가하고 있다. 또한 층 표시 오류, 순시전압강하 및 순시정전으로 인해 승강기 멈춤 후 기준 층 이동 등 승객의 불안감을 유발시킬 수 있고, 인명 사고와 연결될 수 있는 오동작 사고가 발생을 하고 있다. 따라서 본 논문에서는 이런 갇힘 및 오동작을 발생시킬 수 있는 요인에 대한 대책 기기(SPD, Filter, Reactor)가 어느 정도 제어반 설비에 설치되어 있는지 현상 실태조사 및 현장에서 느끼는 오동작 부분에 대해 조사하였다. 조사 결과 90년대 초반 인버터 기종으로 변경되면서 대부분 전원 품질 대책 기기 선치가 미비하였고 최근 들어 대책 기기가 설치됨을 확인할 수 있었다. 하지만 근본적으로 현장에서 느끼는 오동작 횟수는 줄어들지 않음을 확인할 수 있었다. 본 자료는 현재 진행 중인 EN12016(2004) 규정 및 IEC 규정에 따른 엘리베이터의 Sag, Interruption, ESD 등에 대한 내성 시험을 통해 엘리베이터 설비의 성능 평가 부분과 비교해 현장에서 발생될 수 있는 오동작 부분에 대한 가능성을 제시하는데 자료로 사용될 것이다.

무인교통단속장비 설치 판단 기준 및 설치대수 산정 연구 (Study on Estimation of Unmanned Enforcement Equipment Installation Criteria and Proper Installation Number)

  • 소형준;김용만;김남선;황재성;이철기
    • 한국ITS학회 논문지
    • /
    • 제19권6호
    • /
    • pp.49-60
    • /
    • 2020
  • 교통사고 예방을 위해 설치되는 무인교통단속장비의 운영대수는 매년 경찰청과 지방자치단체의 지속적인 설치로 해마다 증가하고 있다. 하지만 공학적, 체계적인 분석결과가 아닌 민원 위주의 정성적인 판단을 기반으로 설치하고 있어 정량적인 설치기준이 필요한 실정이다. 따라서 본 논문에서는 도로 유형별 사고 심각도를 고려한 설치 판단기준을 제시하고 필요 설치대수를 산출하여 향후 추가 설치대수를 도출하는 것을 목표로 하였다. 사고건수와 KSI를 활용하여 교통사고 심각도를 나타낼 수 있는 ARI 지표를 개발하였으며, 일원배치 분산분석과 군집분석을 통해 도로유형을 4가지 유형으로 분류하고, 도로 유형별 사고 잦은 곳의 사고정보를 분석하여 교통사고 심각도가 높은 군집의 ARI를 도출하였다. 도로 유형별 단속장비의 설치 판단을 위한 ARI 값을 제시하였고, 사고 잦은 곳 중 교통단속장비가 기 설치된 구간을 제외하고 5,244대의 추가 설치가 필요한 것으로 분석되었다.

온도와 풍속에 따른 태양광발전 효율 실증분석 연구 (A Study on Solar Power Generation Efficiency Empirical Analysis according to Temperature and Wind speed)

  • 차왕철;박정호;조욱래;김재철
    • 전기학회논문지P
    • /
    • 제64권1호
    • /
    • pp.1-6
    • /
    • 2015
  • Factors that have influence on solar power generation are specified into three aspects such as meteorological, geographical factors as well as equipment installation. Meteorological factors influence the most among the three. Insolation, sunshine hours, and cloud directly influence on solar power generation, whereas temperature and wind speed have impacts on equipment installation. This paper provides explanation over temperature-wind speed equation by calculating influence of temperature and wind speed on equipment installation. In order to conduct a research, pyranometer, anemometer, air thermometer, module thermometer are installed in 2MWp solar power plant located in South Cholla province, so that real-time meteorological data and generating amount can be analyzed through monitoring system. Besides, if existing and new methods are applied together, accuracy of prediction for generating amount is improved.

Integrated Simulations of a Floating Crane Installation Vessel with DP systems in Waves

  • Nam, B.W.;Hong, S.Y.;Kim, Y.S.;Kim, J.W.
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제1권2호
    • /
    • pp.85-93
    • /
    • 2015
  • The nonlinear time-domain analysis method was implemented to carry out a series of integrated simulations for a deep-water crane vessel system composed of four sub components, including a floating vessel, lifted equipment, hoisting cable and dynamic positioning (hereinafter DP) system. The analysis of the coupled dynamics consists of the crane vessel and equipment connected using the crane wire, and the DP is modeled according to the wind, wave and current conditions. The DP systems were numerically implemented using a classical PD feedback controller, and various simulations of the deepwater installation were conducted using different conditions in order to evaluate the global performance of the floating crane vessel combined with the DP system.

공연장의 전기설비중 지락보호설비에 대한 현장실태분석 연구 (A Study on the Analysis of Field Condition for Ground Fault Protection Installation among Electrical Installations in the Entertainment Area)

  • 배석명;김한상;길형준;이건호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 C
    • /
    • pp.1721-1723
    • /
    • 2002
  • This paper deals with the analysis of field condition for earth leakage current alarming system in the stage lighting, stage sound stage machinery installation. These analyses of field condition were carried out in accordance with investigating an installation of earth leakage current alarming system with respect to a main line of power source, dimmer, sound equipment, machinery mobile unit equipment and so on. As a result of analyses. The earth leakage current alarming system has been installed only a part of the main line of power source and the probability of places which were installed was less than 50(%). Therefore, it is desirable that the earth leakage current alarming system is installed at places which are suitable, for example, dimmer, each kind machinery etc. in order to prevent electrical hazard.

  • PDF