• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.37-50
• /
• 2020

A passive containment cooling system (PCCS) has been developed as advanced safety feature for innovative power reactor (iPOWER). Passive systems are inherently less stable than active systems and the PCCS encountered the flashing-induced instability previously identified. The objective of this study is to develop stability maps for flashing-induced instability using MARS (Multi-dimensional Analysis of Reactor Safety) code. Firstly, we conducted a series of sensitivity analysis to see the effects of time step size, nodalization, and alternative MARS user options on the onset of flashing-induced instability. The riser nodalization strongly affects the prediction of flashing in a long riser of the PCCS, while time step size and alternative user options do not. Based on the sensitivity analysis, a standard input and an analysis methodology were set up to develop the stability maps of PCCS. We found out that the calculated equilibrium quality at the exit of the riser as a stability boundary above 5 kW/㎡ was approximately 1.2%, which was in good agreement with Furuya's results. However, in case of a very low heat flux condition, the onset of instability occurred at the lower equilibrium quality. In addition, it was confirmed that inlet throttling reduces the unstable region.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.7-16
• /
• 2020

Objective: It is to find factors related to stability through analysis of plantar pressure factors according to the level of instability when performing Snatch. Method: Foot pressure analysis was performed while 10 weightlifters performed 80% of the highest level of Snatch, and motion was classified and analyzed in 3 grades according to the level of instability. Results: First, in Bad Motion, the movement distance of the pressure center in the direction of ML and AP was larger significantly in Phase 2. Second, in Phase 2, the number of zero-crossing in the AP direction was larger statistically significantly in Good Motion. Third, in the bad motion in Phase 3, the number of zero-crossing in the ML direction showed a significantly larger value. Fourth, in Phase 4, it was found that the more stable the lock out motion, the greater the activity of foot controlling in the left and right directions. Fifth, Phase 3, the greater the Maximum/Mean foot pressure value, the more stable the pulling action. Sixth, in Phase 2, the foot pressure was concentrated with a wide distribution in the midfoot and rearfoot. Seventh, the triggering number of the forefoot region was small in the last pull phase. Eighth, the number of triggers in the toe area was significantly higher during Good Motion in Phase 4. Conclusion: Summarizing the factors of instability in Snatch, there was no significant difference in Phase 1 for each condition. In order to enhance the stability in Phase 2, the sensory control ability in the AP direction is required, and focusing the foot pressing motion with a wide distribution in the middle and rear parts increases the instability. In Phase 3, it was found that the more unstable, the more sensory control activity was performed in the ML direction, the stronger the forefoot pressing action should be performed for a stable Snatch. In Phase 4, It is important that the feet sensory control activity in ML directions and the control ability of the toes in order to have stable Lock out motion.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.4 s.70
• /
• pp.347-360
• /
• 2005

The fuel rod instability can be occurred because of the axial and cross flow due to the flow anomaly and/or flow redistribution in the lower core plate region of the pressurized water reactor. The fuel rod vibration due to the hydraulic instability is one of the root causes of fuel failure. The verification on the fuel rod vibration and instability is needed for the new fuel assembly design to verify the fuel rod instability. In this study, the fuel rod vibration and stability analyses were performed to investigate the effect of the grid height, fuel rod support condition, and span adjustment on the fuel rod vibration characteristics for the advanced $16{\times}16$ fuel assembly design. Based on the analysis results, the grid height and grid axial elevation of the advanced $16{\times}16$ fuel assembly design were proposed.

• Clinics in Shoulder and Elbow
• /
• v.19 no.2
• /
• pp.78-83
• /
• 2016

Background: We investigated the risk factors for the recurrence of anterior shoulder instability after arthroscopic surgery with suture anchors and the clinical outcomes after reoperation. Methods: A total of 281 patients (February 2001 to December 2012) were enrolled into our study, and postoperative subluxation and dislocation were considered as recurrence of the condition. We analyzed radiologic results and functional outcome including the American Shoulder and Elbow Surgeons Evaluation Form, the Korean Shoulder Society Score, and the Rowe scores. Results: Of the 281 patients, instability recurred in 51 patients (18.1%). Sixteen out of 51 patients (31.4%) received a reoperation. In terms of the functional outcome, we found that the intact group, comprising patients without recurrence, had a significantly better functional outcome than those in the recurrent group. The size of glenoid defect at the time of initial surgery significantly differed between intact and recurrent group (p<0.05). We found that the number of dislocations, the time from the initial presentation of symptoms to surgery, and the number of anchor points significantly differed between initial operation and revision group (p<0.05). The functional outcome after revision surgery was comparable to intact group after initial operation. Conclusions: Eighteen percent of recurrence occurred after arthroscopic instability surgery, and 5.6% received reoperation surgery. Risk factors for recurrence was the initial size of glenoid defect. In cases of revision surgery, good clinical outcomes could be achieved using additional suture anchor.

• Structural Engineering and Mechanics
• /
• v.12 no.5
• /
• pp.507-526
• /
• 2001

In standard finite element algorithms, the local stability conditions are not accounted for in the formulation of the tangent stiffness matrix. As a result, the loss of the local stability is not adequately related to the onset of the global instability. The phenomenon typically arises with material-type localizations, such as shear bands and plastic hinges. This paper addresses the problem in the context of the planar, finite-strain, rate-independent, materially non-linear beam theory, although the proposed technology is in principle not limited to beam structures. A weak formulation of Reissner's finite-strain beam theory is first presented, where the pseudocurvature of the deformed axis is the only unknown function. We further derive the local stability conditions for the large deformation case, and suggest various possible combinations of the interpolation and numerical integration schemes that trigger the simultaneous loss of the local and global instabilities of a statically determined beam. For practical applications, we advice on a procedure that uses a special numerical integration rule, where interpolation nodes and integration points are equal in number, but not in locations, except for the point of the local instability, where the interpolation node and the integration point coalesce. Provided that the point of instability is an end-point of the beam-a condition often met in engineering practice-the procedure simplifies substantially; one of such algorithms uses the combination of the Lagrangian interpolation and Lobatto's integration. The present paper uses the Galerkin finite element discretization, but a conceptually similar technology could be extended to other discretization methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1664-1670
• /
• 1991

For kinematically redundant manipulators, conventional dynamic control methods of local torque optimization showed the instability which resulted in physically unachievable torque requirements. In order to guarantee stability of the null space vector method which resolves redundancy at the acceleration level, Maciejewski[1] analyzed the kinetic behavior of homogeneous solution component and proposed the condition to identify regions of stability and instability for this method. 'In this paper, a modified null space vector method is first presented based on the Maciejewski's condition which is a function of a manipulator's configuration. Secondly, a new control method which is based on the concept of aspects is proposed. It was shown by computer simulations that the modified null space vector method and the proposed method have a common property that a preferred aspect is preserved during the execution of a task. It was also illustrated that both methods demonstrate a drastic reduction of torque loadings at the joints in the tracking motion of a long trajectory when compared with the null space vector method, and thus guarantee the stability of joint torque.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.779-784
• /
• 2014

This study provided the analytical model describing the friction-induced noise in the ball joint system under the edge loading condition. The frictional and conformal contact kinematics between the spherical bearing and the hemispherical socket was derived and the dynamic equations of the perturbed motion were established. The numerical results revealed that the bending modes of the ball joint system can become unstable due to friction, and the axial load and contact stiffness strongly influenced the dynamic instability. In contrast, the tilting angle of the socket was not found to significantly contribute to the dynamic instability of the ball joint.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.397-408
• /
• 1988

The study is concerned with the theoretical and experimental investigation of the elliptical bulge test. The elliptical bulge test is analyzed by using a rigid-plastic finite element method incorporating large deformation and normal anisotropy. Thin elliptical diaphragms of mild steel are bulged for three aspect ratios. The contact problem the die round and the sheet is successfully solved by using a skew boundary condition. It is shown that the proper consideration of die radius and normal anisotropy is very significant. The relation between bulging pressure and deformation is obtained. It has been found that the pole is nearly under proportional straining during deformation. The instability criterion by maximum load condition enables the effective prediction of instability pressure. The computional results are in good agreement with experimental results and to be very useful for a better understanding of the elliptical bulge test.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.1
• /
• pp.16-23
• /
• 2004

Acoustic characteristics of unbaffled and baffled combustion chamber are experimentally investigated under atmospheric condition to preliminarily determine baffle for mitigation of combustion instability. To investigate the effect of the baffle which has several configurations such as radial baffles and hub/blade baffle, resonant-frequency shift and damping factors of the chamber were analyzed and compared quantitatively with those of the unbaffled combustion chamber. From a view of acoustic characteristics, radial baffles with several configurations have not much difference in resonant-frequency shift and damping factor ratio with each other. On the other hand, hub and blade baffle is very effective to suppress the first tangential mode which was found to be the most harmful acoustic mode in KSR(Korean Sounding Rocket)-III engine. But more study on design parameters such as hub size and axial length should be done for complete optimization of hub and blade baffle. The present study based on linear acoustic analysis is expected to be a useful confirming tool to predict acoustic field and design a passive control devices such as baffle and acoustic cavity.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.321-326
• /
• 2000

To examine the feasibility of the long-term production of the human granulocyte colony stimulating factor (hG-CSF) using the $_{L}-arabinose$ promoter system of Escherichia coli, flask relay culture and cyclic fed-batch culture were performed. In the flask relay culture, it was found that the pismid was maintained stably up to about 170 generations in an uninduced condition, whereby the cells could also maintain the capability of expressing hG-CSF expression were maintained stably up to at least 100 generations. In contrast, in the cyclid fed-batch culture, segregational plasmid instability was observed within about 4 generations after induction, even though the cell growth and hG-CSF production reached their maximum balues, 78.0 g/l of dry cell weight and 7.0 g/l of hG-CSF, respectively. It would appear that, when compared to the flask relay culture, the high-cell density and high-level expression of hG-CSF in the cyclic fed-batch cultrure led to the segregational plasmid instability; in other words, a severe metabolic burden existe on the cells due to the high-level expression of hG-CSF. Accordingly, based on these long-term cultures, the segregational and structural plasmid instability was observed and a strategy to overcome such problems could be designed.