• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.522-525
• /
• 2009

하이브리드 로켓의 연소 과정에서 DC-shift 현상을 관찰할 수 있다. 이와 같은 현상은 갑작스런 구조적 문제를 일으키거나 추력의 상승 또는 감소를 가져와 추력 성능의 저하를 유발한다. DC-shift 현상에 대한 이해를 통해 하이브리드 로켓의 연소 안정의 조건을 알 수 있다. 이 논문에서는 예-혼합실과 후-연소실을 장착하고 산화제 공급 유동 조건을 달리 함으로서 Negative DC-shift 현상을 유도하고 다양한 산화제 공급 유동 조건에 따른 Negative DC-shift 현상의 발생 조건과 특징에 대하여 알아보았다. Negative DC-shift 현상에 대한 실험적 연구를 통하여 Negative DC-shift 현상의 발생 원인과 현상의 특징에 대해 정의하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.541-548
• /
• 2002

Membrane, cable structure and membrane-cable structural system are more lighter than another common structural system, and these are able to be effectively build Lip spatial structures using axial stiffness. However when the load reach at critical load level, it might be happened snap-through or bifurcation according to the structure's shape, and these collapse mechanism should be very important in the design of structures. So, In this paper we study static instability of Zetlin-type cable dome, one of the hybrid cable dome. Moreover, as the unstable behavior of shell structures are very sensitive to the initial condition, we seek to find the effect of initial condition.

• Tribology and Lubricants
• /
• 제17권4호
• /
• pp.283-289
• /
• 2001

The paper presents the stability characteristics of a rotor-bearing system supported by actively controlled hydrodynamic journal bearing. The proportional and derivative controls including coupled motion are adopted for the control algorithm to control the hydrodynamic journal bearing with a circumferentially groove. Also, the cavitation algorithm implementing the Jakobsson-Floberg-Olsson boundary condition is adopted to predict cavitation regions in the fluid film more accurately than a conventional analysis which uses the Reynolds condition. The stability characteristics of a rotor-bearing system supported by actively controlled hydrodynamic journal bearing are investigated for various control gains with the Routh-Hurwitz criteria using the linear dynamic coefficients which are obtained from the perturbation method. It is found that the speed at onset of the instability is increased for both proportional and derivative control of the bearing. It is also found that the proportional and derivative control of the coupled motion is more effective than that of the uncoupled motion.

• 대한토목학회논문집
• /
• 제38권3호
• /
• pp.449-456
• /
• 2018

본 연구에서는 네일 보강설계에 따른 국부 쐐기파괴의 안정성 검토가 가능한 네일 설계방법을 제안하기 위해, 국부 쐐기파괴에 대한 파괴 메커니즘을 확인하고 이에 대한 안전율 산정식을 개발하였다. 개발된 이론식을 이용하여 네일 보강여부, 지반조건, 네일 보강설치 패턴을 변화시켜 가면서 해석을 수행하였다. 또한 이를 바탕으로 각 영향요소에 대한 민감도 분석을 실시하였다. 해석 및 분석결과, 네일로 보강된 비탈면의 경우 무보강 비탈면 보다 안전율이 설계기준 이상으로 증가하였으며, 지반조건에 따른 비탈면의 안전율은 건기 시, 우기 시, 우기 시의 침투조건 순으로 증가하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권4호
• /
• pp.510-521
• /
• 2001

A nonlinear acoustic instability of subcritical liquid-oxygen droplet flames burning in gaseous hydrogen environment are investigated numerically. Emphases are focused on the effects of finite-rate kinetics by employing a detailed hydrogen-oxygen chemistry and of the phase change of liquid oxygen. Results show that if nonlinear harmonic pressure oscillations are imposed, larger flame responses occur during the period that the pressure passes its temporal minimum, at which point flames are closer to extinction condition. Consequently, the flame response function, normalized during one cycle of pressure oscillation, increases nonlinearly with the amplitude of pressure perturbation. This nonlinear response behavior can be explained as a possible mechanism to produce the threshold phenomena for acoustic instability, often observed during rocket-engine tests.

• 한국공간구조학회논문집
• /
• 제20권2호
• /
• pp.77-85
• /
• 2020

This paper examined the dynamic instability of a shallow arch according to the response characteristics when nearing critical loads. The frequency changing feathers of the time-domain increasing the loads are analyzed using Fast Fourier Transformation (FFT), while the response signal around the critical loads are analyzed using Hilbert-Huang Transformation (HHT). This study reveals that the models with an arch shape of h = 3 or higher exhibit buckling, which is very sensitive to the asymmetric initial conditions. Also, the critical buckling load increases as the shape increases, with its feather varying depending on the asymmetric initial conditions. Decomposition results show the decrease in predominant frequency before the threshold as the load increases, and the predominant period doubles at the critical level. In the vicinity of the critical level, sections rapidly manifest the displacement increase, with the changes in Instantaneous Frequency (IF) and Instant Energy (IE) becoming apparent.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1166-1171
• /
• 2004

The combustion instability acts as a serious obstacle for the lean premixed combustion of gas turbine and even causes the fatal damage to the combustor and whole system. In this experiment, the pressure fluctuation is highly related to the stabilizing position of flame and fuel injection location. The fuel injection location is connected with the convection time of the fresh mixture, which is important time scale to refresh the mixtures near the flame stabilization location. The flame is extremely unstable when the alternative stabilization occurs and bulk mode frequency (${\sim}10Hz$) of pressure fluctuation is observed in this condition. It was found that the convection time scale of the fresh reactant coincided with the time scale of the bulk mode fluctuation. Hence this phenomenon results from the local equivalence ratio change caused by the pressure fluctuation induced by thermo-acoustic effects.

• 소음진동
• /
• 제8권2호
• /
• pp.336-345
• /
• 1998

The dynamic instability of cylindrical shell with clamped-free boundary condition subjected to constant follower force or $P_0 + P_1cos {\Omega}_t$ type pulsating follower force is analyzed. The motion of shell is modeled using the shell theory considering rotary inertia and shear deformation, and analyzed with finite element method. In case of constant follower force, the changes of eigenvalues dependent on the magnitude of applied load are investigated and the critical loads are obtained. In case pulsating follower force, instability regions of exicitation frequency are obtained by modal transform with right and left modal matrix and by multiple scales method. The effects of thickness ratio and aspect ratio on the instability of shell are studied.

• 한국안전학회지
• /
• 제5권2호
• /
• pp.58-65
• /
• 1990

The purpose of this study is to consider the effects of strain rate on the stress-strain behavior of sheet metal at instability. The results and conclusions obtained as follows ： 1. As the strain rate increases, the fracture pressure increases and the polar height at fracture decreases. 2. The effect of strain rate on forming limit diagram produces a general lowering of the diagram with increasing strain rate but changes according to materials and strain paths. 3. The forming limit diagram predicted by swift instability theory is comparatively inconsistent with the experimental result at high strain rates, because there is inevitable gap between them.

• Structural Engineering and Mechanics
• /
• 제44권4호
• /
• pp.487-499
• /
• 2012

Dynamic instability of beams subjected to periodic axial forces is studied using the discrete singular convolution (DSC) method with the regularized Shannon's delta kernel. The principal regions of dynamic instability under different boundary conditions are examined in detail, and the non-stationary vibrations near the stability-instability critical regions have been investigated. It is found that the results obtained by using the DSC method are consistent with the analytical solutions, which shows that the DSC algorithm is suitable for the problems considered in this study. It was found that there is a narrow region of beat vibration existed in the vicinity of one side (${\theta}/{\Omega}$ > 1) of the boundaries of the instable region for each condition.