• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.82-84
• /
• 2003

This paper presented a method to develop a relay model by the user-written model function of PSS/E. As for the voltage instability, although generator current limiters, transformer's tap-changers and dynamic loads have been considered as the dominant components, the protection system is also very important because it may influence the system's dynamic behaviour. Hence a distance relay model implemented with the suggested method was added, and then the operating characteristics of the distance relay under the voltage instability condition were investigated.

• 대한족부족관절학회지
• /
• 제23권1호
• /
• pp.6-11
• /
• 2019

As a result of the increased participation in recreational and competitive sports activity, the incidence of chronic lateral instability has risen. Because chronic ankle instability can cause significant comorbidity and increase the social cost, the interest in this issue is growing. Although there are well-documented and effective surgical treatments for managing this condition, conservative treatments are a viable first option in selected patients. Through conservative treatment, surgical treatments can be reduced or delayed without necessarily affecting the overall outcome, but the failure of conservative treatment results in the need for surgical treatment to reduce the long term complications. Appropriate postoperative rehabilitation is essential for adequate functional recovery, even when surgical treatment is required.

• 지질공학
• /
• 제17권3호
• /
• pp.393-404
• /
• 2007

본 연구는 절리암반사면의 현장상태 및 위험도에 대한 현장조사를 기초로 사면의 상대적 위험도를 판단 할 수 있는 토대를 마련하기 위하여 개별요인이 사면안정성에 미치는 영향을 고찰하였으며 사면붕괴에 영향을 미치는 요인들에 대한 통계적 분석을 수행하였다. 사면의 붕괴요인으로는 기존에 제시된 인장균열, 지반변형, 구조물 변형, 붕괴발생규모, 절리주향, 절리경사, 절리상태, 사면경사, 강우 및 지하수위, 절취상태, 배수조건, 보호보강상태 등 12가지 항목을 고려하였다. 본 연구를 위한 조사지역은 경상남도 지방도로에 위치한 절취사면 중 붕괴 이력이 있거나 다소 불안감을 보이는 위험 절개지 233개소이다. 조사지역의 사면안정성평가는 각각의 평가요인(붕괴요인)에 따른 사면의 결함지수와 사면위험등급에 의해 수행되었다. 조사된 총 233개소의 사면 중 토사사면을 제외한 암반사면 126개소를 선별하여, 각각의 붕괴요인들과 사면위험등급과의 통계적 연관성분석을 실시하였다. 또한, 다중회귀분석을 수행하고 적용성을 고찰하여 사면결함지수와 위험등급을 예측할 수 있는 통계모형을 제시하였다.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1489-1498
• /
• 2013

본 연구에서는 불포화 사면에서 선행강우의 영향을 고려하고자 지반의 초기 포화도를 3가지(36, 51, 77%)로 설정하여 수리학적-역학적 동시 유한요소해석(monolithically coupled finite element analysis)을 수행하였다. 선행강우에 의한 불포화 사면의 불안정성은 사면 내 모관흡수력 분포와 사면표층의 변위를 통하여 확인할 수 있다. 또한 Drucker-Prager model의 항복경계기준(trial failure criterion)을 적용하여 강우 침투에 의한 불포화 사면의 탄성 및 소성거동을 파악하였다. 그 결과, 선행강우에 의한 지반의 초기 포화도가 클수록 강우에 의한 변위가 크게 발생하며 모관흡수력 또한 감소한다. 특히, 모관흡수력은 지반이 건조할수록 빠르게 감소하며, 초기에 동일한 모관흡수력을 갖는 사면표층에서 포화도가 작은 지반일수록 더 빠른 모관흡수력 감소를 보였다. 풍화토의 탄성과 소성거동을 구분하기 위해 사용된 Drucker-Prager model을 통해 사면 파괴가 시작되는 항복경계지점을 확인 할 수 있었다.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.79-87
• /
• 2002

로켓엔진에서 발생하는 음향 불안정성의 정성적 경향성을 파악하기 위해 축대칭 연소실에서의 음향파 응답 특성을 수치해석적으로 조사하였다. 주로 작동조건의 변화와 외부교란의 가진 주파수 변화에 따른 응답 특성을 계산하였다. 외부교란으로 연소실 입구부분의 전압이 정현파 형태로 섭동하도록 인위적으로 부여하였다. 음향 응답의 정성적 경향성이 유지되는 범위내에서, 분무 연소과정에 수반되는 여러 가지 물리 화학적인 과정들을 단순화하였다. 먼저, 주어진 작동조건에서 정상상태의 연소장을 구하고, 다음 단계로 압력섭동에 대한 연소장의 거동을 시간의 경과에 따라 구하였다. 작동조건의 변화에 따른 음향파 응답의 계산 결과, 반응 지역에서 약한 강도의 화염이 형성되는 경우 민감한 응답이 나타나 불안정안 압력분포를 나타냈다. 또한, 가진되는 압력 섭동의 주파수에 따라 응답 특성이 변하였고, 특히 높은 가진 주파수의 압력 섭동에 대해서 불안정한 응답이 나타났다. 해석 결과로 나타난 거시적 현상의 이해를 돕기위해, 기존의 화염소 모델을 채택한 음향파 응답 연구 결과와의 상관성을 찾아 본 해석 결과를 분석하였다.

• 한국전문물리치료학회지
• /
• 제28권3호
• /
• pp.200-207
• /
• 2021

Background: Postural control deficit is a major characteristic in patients with chronic ankle instability (CAI). Elastic ankle tapings are commonly used to facilitate postural control in patients with CAI as well as prevent relapse of a lateral ankle sprain. However, equivocal evidence exists concerning the effect of elastic ankle taping on postural control. Objects: This study aimed to evaluate the effects of elastic ankle tapings using kinesio taping (KT) and dynamic taping (DT) on static and dynamic postural control in patients with CAI. Methods: Fifteen subjects with CAI were participated in this study. The participants performed tests under three conditions (barefoot, KT, and DT). Static postural control was evaluated using the one-leg standing test (OLST) and dynamic postural control using the modified Star Excursion Balance Test (mSEBT). One-way repeated-measures analysis of variance was used to compare center of pressure (CoP) data and normalized mSEBT reach distances among the three conditions (with α = 0.05). Results: The CoP parameters (path length, ellipse area, and mean velocity) of the OLST significantly decreased on applying KT and DT compared with those when barefoot. The normalized reach distances in the anteromedial (AM), medial (M), and posteromedial (PM) directions of the mSEBT significantly increased with DT compared to that in the control condition. Further, the higher reach distances with KT compared with those in the control condition were obtained in the M and PM directions of the mSEBT. No significant differences were identified in any of the OLST and SEBT parameters between the two different taping applications. Conclusion: KT and DT improved static postural control during the OLST compared with the control condition. Moreover, these tapes improved dynamic postural control during the mSEBT compared to the control. Therefore, elastic ankle tapings are useful prophylactic devices for the prevention and treatment of ankle sprain in people with CAI.

• 한국소음진동공학회논문집
• /
• 제12권4호
• /
• pp.261-271
• /
• 2002

The fluid-elastic instability analysis of the U-tube bundle inside the steam generator is very important not only for detailed design stage of the SG but also for the change of operating condition of the nuclear powerplant. However the calculation procedure for the fluid-elastic instability was so complicated that the consolidated computer program has not been developed until now. In this study, the numerical calculation procedure and the computer program to obtain the stability ratio were developed. The thermal-hydraulic data in the region of secondary side of steam generator was obtained from executing the ATHOS3 code. The distribution of the fluid density can be calculated by using the void fraction, enthalpy, and operating pressure. The effective mass distribution along the U-tube was required to calculate natural frequency and dynamic mode shape using the ANSYS ver. 5.6 code. Finally, stability ratios for selected tubes of the CE type steam generator were computed. We considered the YGN 3.4 nuclear powerplant as the model plant, and stability ratios were investigated at the flow exit region of the U-tube. From our results, stability ratios at the central and the outside region of the tube bundle are much higher than those of other region.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.343-349
• /
• 2006

Systematic experiments in $CH_4/Air$ counterflow diffusion flames diluted with He have been undertaken to study the oscillatory instability in which lateral flame size was less than burner nozzle diameter and thus lateral heat loss could be remarkable at low global strain rate. The oscillatory instability arises for Lewis numbers greater than unity and occurs near extinction condition. The oscillation is the direct outcome from the advancing and retreating edge flame. The dynamic behaviors of extinction in this configuration can be classified into three modes; growing, harmonic and decaying oscillation mode near extinction. As the global strain rate decreases, the amplitude of the oscillation becomes larger. This is caused by the increase of lateral heat loss which can be confirmed by the reduction of lateral flame size. Oscillatory edge flame instabilities at low global strain rate are shown to be closely associated with not only Lewis number but also heat loss (radiation and lateral heat loss).

• 대한금속재료학회지
• /
• 제46권7호
• /
• pp.449-457
• /
• 2008

Compression deformation behaviors at high temperature as a function of temperature and strain rate were investigated in the 6061 aluminum alloy, which is used for automobile wheel. Compression tests were carried out in the range of temperatures $300{\sim}475^{\circ}C$ and strain rate $10^{-3}{\sim}10^{-1}sec^{-1}$. By analyzing these results, strain rate sensitivity, deformation temperature sensitivity, the efficiency of power dissipation, Ziegler's instability criterion, etc were calculated, which were plastic deformation instability parameters as suggested by Ziegler, Malas, etc. Furthermore, deformation processing map was drawn by introducing dynamic materials model (DMM) and Ziegler's Continuum Criteria. This processing map was evaluated by relating the deformation instability conditions and the real microstructures. As a result, the optimum forging condition for the automobile wheel with the 6061 aluminum alloy was designed at temperature $450^{\circ}C$, strain rate $1.0{\times}10^{-1}sec^{-1}$. It was also confirmed by DEFORM finite element analysis tool with simulation process.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1298-1307
• /
• 2017

The constant on-time current-mode controlled (COT-CMC) switching dc-dc converter is stable, with no subharmonic oscillation in its current loop when a voltage ripple in its outer voltage loop is ignored. However, when its output capacitance is small or its feedback gain is high, subharmonic oscillation may occur in a COT-CMC buck converter with a proportional-integral (PI) compensator. To investigate the subharmonic instability of COT-CMC buck converters with a PI compensator, an accurate reduced-order asynchronous-switching map model of a COT-CMC buck converter with a PI compensator is established. Based on this, the instability behaviors caused by output capacitance and feedback gain are investigated. Furthermore, an approximate instability condition is obtained and design-oriented stability boundaries in different circuit parameter spaces are yielded. The analysis results show that the instability of COT-CMC buck converters with a PI compensator is mainly affected by the output capacitance, output capacitor equivalent series resistance (ESR), feedback gain, current-sensing gain and constant on-time. The study results of this paper are helpful for the circuit parameter design of COT-CMC switching dc-dc converters. Experimental results are provided to verify the analysis results.