• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.391-402
• /
• 2006

Most previous studies considering inventory models for imperfect quality assumed that defective items could be completely detected by inspection and fixed before delivery to customers. This makes it difficult to adopt their research results to practice. This study reduces the assumption of perfect inspection, and presents an inventory model considering reverse logistics caused by imperfect inspection. System dynamics model is used to describe complex and dynamic problem and to show the effect of imperfect inspection on profit by simulation. Then, this article provides a guideline for the inspection policy which provides the maximum profit.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.89-99
• /
• 2015

In this research, 1,032 data of precise safety inspection from 2004 to 2013 are gathered and constructed for finding effective safety inspection systems. Items are extracted from constructed data and factors for typology are decided with statistical method such as principle component analysis and cluster analysis. For factor decision, we extruded independent characteristics such as morphological and geographical characteristic, and deleted items which can be expressed by combination of independent characteristics. Four factors such as total storage, watershed ratio, levee length ratio, and spillway length ratio are extracted in this process. In cluster analysis, levee length ratio is excluded because it is not separated as cluster. Finally nine types of agricultural reservoir are extruded by total storage, watershed ratio, and spillway length ratio with frequency analysis.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.4
• /
• pp.57-65
• /
• 2023

The public safety management guidelines were introduced in 2019 and continue to be dedicated to advancing comprehensive measures for public safety management, with a primary focus on prioritizing the safety and well-being of the public within governmental institutions. To achieve this goal, our previous study developed a establishment procedure of risk assessment-based safety inspection system for public institutions that order construction projects and applied it to highway construction projects to evaluate its effectiveness. To enhance the practicality of the establishment procedure, it is essential to collect and analyze feedback from stakeholders regarding its performance and suitability. This study conducted a survey involving 200 participants who had experience with the establishment procedure, and performed statistical analyses to evaluate its performance and applicability. The survey results indicated that the participants reported a high level of satisfaction (scoring 4 and above on a 5-point Likert scale) in several areas: specialization of safety inspection items for different types of work (with a satisfaction rate of 65%), the evaluation process for safety ratings (64.5%), and their willingness to recommend the procedure to other institutions (75.5%). In the factor analysis with Varimax rotation, two factors emerged: (1) a specialization factor related to safety inspection items, and (2) a grading factor associated with safety evaluation results. Regression analyses of these factors unveiled significant positive relationships with improvements in safety and health performance, including the prevention of fatal accidents, heightened safety responsibility, and raised safety inspection standards. The establishment procedure of safety inspection system developed in our previous study can play a crucial role in reducing accidents resulting in fatalities and injuries at construction sites, ultimately contributing to a safer working environment for all involved parties.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.698-704
• /
• 2010

The machine vision system has been widely applied at automatic inspection field of the industries. Especially, the machine vision system shows good performance at difficult inspection field by contact method. In this paper, the automatic system of a slant method to inspect screw/bolt shape using machine vision is developed. The inspection system uses pattern matching method that search similar degree of the lucidity, the average lucidity, length and angle of inspection set up area using a circular scan and a line scan method. Also the feeding method for inspection product is the slant method, and feed rate is controlled by the ramp angle adjustment. This inspection system is composed of a feeding device, a transfer device, vision systems, a lighting device and computer, and is composed the sorting discharge system of the inferior product. The performance test carried out the feeding speed, the shape correct degree and the sorting discharge speed according to the type of screw/bolt. This sorting inspection system showed a satisfied test results in whole inspection items. Presently, this sorting inspection system is being used in the manufacturing process of screw/bolt usefully.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.997-1005
• /
• 2018

The regulatory periodic safety inspection system is one of the most important methods for confirming the safety of nuclear power plants and the defense in depth in nuclear safety is the most important basic means for accident prevention and mitigation. Recently, a new regulatory technology based on risk-informed and safety performance has been developed and used in advanced countries. However, since the domestic periodic inspection system is being used in the same way over 30 years, it is necessary to know how the inspection contributes to the safety confirmation of the nuclear power plants. In this study, the domestic periodic inspection system currently in use was analyzed from the perspective of defense in depth in nuclear safety. In addition, the analysis results were compared to the U.S. NRC's safety inspection system to obtain consistency and lessons in this study. As a result of analysis, the NRC's safety inspections were distributed almost evenly at the all levels of defense in depth, while in the case of domestic inspection, they were heavily focused on the level 1 of defense in depth. Therefore, it appeared urgent to improve the inspection system to strengthen the other levels of defense in depth in nuclear safety.

• Journal of Korean Institute of Industrial Engineers
• /
• v.11 no.2
• /
• pp.19-27
• /
• 1985

Optimal numbers of repeat inspections are obtained for a single inspector who has a fixed probability of detecting a nonconforming item on each inspection and will continue to inspect until further inspection is not warranted when comparing the expected increase of total gain with the inspection cost. It is assumed that the detection probability decreases as the number of repeat inspections increases, and that the lot to be inspected contains an unknown but Poisson distributed number of nonconforming items.

• Journal of Korean Society for Quality Management
• /
• v.15 no.1
• /
• pp.68-75
• /
• 1987

A rectifying inspection plan is considered for the case of destructive testing. Screening inspection for rejected lots is performed by some nondestructive testing which is prone to misclassification errors. Apparent defectives found in the screening process is replaced with apparent good items. The plan provides LTPD protection on each individual lot while the sum of the cost of testing and the cost due to producer's risk at process average quality is minimized. A brief discussion on average outgoing quality is also given.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.83-93
• /
• 2017

This study proposed the new weighting values and fault points of condition assessment items for reinforced earth retaining walls based on the combination the inspection data and hybrid weighting technique. Utilizing the inspection data of 161 reinforced earth retaining walls, multi regression analysis and entropy technique were applied to gain the weighting values of condition assessment items. In addition, the weighting values by AHP technique was analyzed based on the opinion of experts. By appling hybrid weighting technique to the calculated weighting values obtained by the individual technique, the new weighting values of condition assessment items were proposed, and the fault points and fault indices of reinforced earth retaining walls were proposed. Results showed that the rank of the weighting value of the condition evaluation items was fluctuated according to the multiple regression analysis, AHP technique, and entropy technique. There was no duplication of the rank of the weighting value while the current weighting value was overlapped. Specially, in the rsults of multi regression analysis, two condition assessment items were occupied 70% of the total weights. When the proposed weighting values were applied to existing reinforced earth retaining wall of 161, 16 reinforced earth retaining walls showed the increased risk rank and 31 represented the decreased risk rank.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.28-34
• /
• 1997

This paper describes an automatic measurement method for the in-line inspection of assembly tolerances of cathod ray electron guns. The method uses an optical microscope with a CCD camera as a probe. An automatic gap recognition algorthm with digital image processing and a new software autofocus algorithm based on using an optimal edge detector have been developed to improve the measuring accuracy. An inspection system has been proposed and practically implemented for in-line inspection to a real factory automation line. The inspection system consists of a gap inspection part and an eyelet. Total time consumed for inspecting all measuring items is about 10 seconds and the repeatability is below .+-. 5 .mu. m

• Industrial Engineering and Management Systems
• /
• v.8 no.2
• /
• pp.72-79
• /
• 2009

The ultimate goal of inventory management is to decide the timing and the quantity of ordering in response to uncertain demands. Recently, some researchers have focused upon an impact of distortions in the information, e.g., customer order cancellation, on an economical inventory policy. The customer order cancellation is considered a kind of distortions in demands, because a demand that is eventually cancelled is equivalent to a phony demand. Also, there are some additional distortions in the inventory information. For instance, the procurement of suppliers may include some nonconforming items as a result of imperfect production and inspection by the suppliers, and/or damage in transit. The nonconforming item should be considered a kind of distortions in the inventory information, because the nonconforming item is equivalent to a phony stock. In this article, we consider an inventory model under the situation that customers can cancel their orders and the procurement of suppliers may include some nonconforming items. Then, we introduce the customer order reservation into the inventory model for the purpose of avoiding the costly backlogs, because the customer order reservation gives retailers a period to fulfill customer's requests. We formulate a periodic review (s, S) inventory model and investigate the economical operation under the situation mentioned above. Further, through the sensitivity analysis, we show the impact of these distortions and the effect of the customer order reservation on the inventory policy.