• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.968-974
• /
• 2004

Automakers have been forcing their suppliers to guarantee qualities of parts. Then, the suppliers have met the fundamental quality requirements such as dimensions and functions, but they could not sufficiently satisfy the automakers' noise requirements yet because automatic noise inspection systems were little successfully adopted In mass-production lines. This study tried to develop a system for automatically checking noise radiated from a rotating engine part and filtering parts emitting noise higher than criteria: the upper limits of a overall noise level or a noise spectrum. A commercial noise measurement system was used for measuring noise, and then the noise data was transmitted to a governing program through OLE(object, linking and embedding) functions. The governing program, belonging to a total noise inspection system managed the noise measurement and analysis. This system was successfully adapted for distinguishing bad parts according to the noise criteria.

• 전기전자학회논문지
• /
• 제25권3호
• /
• pp.485-492
• /
• 2021

본 논문에서는 다각형 용기의 결함 검사 시스템 개발을 제안한다. 임베디드 보드는 메인부, 통신부, 입·출력부 등으로 구성된다. 메인부는 주 연산장치로써 임베디드 보드를 구동하는 운영체제가 포팅되어서 외부 통신, 센서 및 제어를 위한 입출력을 제어할 수 있다. 입·출력부는 필드에 설치되어 있는 센서들의 전기적신호를 디지털로 변환하여 메인모듈로 전달하는 역할 및 외부 스텝 모터 제어의 역활을 한다. 통신부는 영상 촬영 카메라 트리거 설정 및 제어 장치의 구동 설정의 역할을 수행한다. 입·출력부는 제어 스위치 및 센서들의 전기적신호를 디지털로 변환하여 메인모듈로 전달하는 역할을 수행한다. 동작 모드 등과 관련한 펄스 입력 등을 받기 위한 입력회로에는 외부 노이즈의 간섭을 최소화하기 위하여 각 입력포트에는 포토커플러를 설계한다. 제안된 다각형 용기의 결함 검사 시스템 개발의 정확성을 객관적으로 평가하기 위하여 다른 머신비전 검사 시스템과 비교를 해야 하지만, 현재 다각형 용기의 머신비전 검사 시스템이 존재하지 않기 때문에 불가능하다. 따라서, 동작 타이밍을 오실로스코프로 측정하여서 Test Time, One Angle Pulse Value, One Pulse Time, Camera Trigger Pulse, BLU 밝기 제어 등과 같은 파형이 정확히 출력됨을 확인하였다.

• 비파괴검사학회지
• /
• 제35권4호
• /
• pp.258-267
• /
• 2015

Eddy current testing is widely used for inspecting steam generator tubing in nuclear power plants (NPPs). The inspection technique for steam generator tubing in NPPs should be qualified in accordance with examination guidelines. When the components of a qualified system such as eddy current tester, probe, and data analysis program, are changed, the equivalency of the modified system to the originally qualified system must be verified. The eddy current tester is the most important part of an eddy current testing system because it excites and transmits alternating currents to the probe, receives coil impedance of the probe and generates signals for anomalies. The Korea Hydro & Nuclear Power Co., Ltd. (KHNP) developed an eddy current testing system with an eddy current tester and data acquisition-analysis program for inspecting the steam generator tubing in NPPs; this system can be used for an array probe and as a bobbin and rotating probes. The equivalency assessment for the currently developed system was carried out, and we describe the results in this paper.

• 한국압력기기공학회 논문집
• /
• 제7권3호
• /
• pp.61-66
• /
• 2011

The integrity of the SG(Steam Generator) tubes has been challenged by numerous factors such as flaws, operation, atmosphere, inherently degraded materials, loose parts and even human errors. Of the factors, loose parts(or foreign materials) on the secondary side of the tubes can bring about volumetric defects and even leakage from the primary to the secondary side in a short period of time. More serious concerns about the loose parts are their unknown influx path and rapid growth rate of the defects affected by the loose parts. Therefore it is imperative to detect and characterize the foreign materials and the defects. As a part of the measures for loose part detection, TTS(Top of Tubesheet) MRPC(Motorized Rotating Pancake Coils) ECT has been carried out especially to the restricted high probability area of the loose part. However, in the presence of loose parts in the other areas, wide range loose part detection techniques are required. In this study, loose part standard tube was presented as a way to accurately detect and characterize loose part signals. And the SG tube ECT bobbin coil and MRPC ISI(In-service Inspection) data of domestic OPR-1000 and Westinghouse Model F(W_F) were reviewed and consequently, comprehensive loose part detection technique is derived especially by applying bobbin coil signals