• 반도체디스플레이기술학회지
• /
• 제14권1호
• /
• pp.7-11
• /
• 2015

In this paper, an automatic focusing method has been proposed for speedy and reliable measurement and inspection in industry. It is very difficult to determine focusing step size and moving direction in one camera autofocusing. The proposed method can improve speed and accuracy of focusing by using the optical axis interval of two cameras, which is automatically set up as focusing step size. Also, it can determine moving direction from focus value comparisons of two cameras, and then solve ambiguity of one camera focusing. Its performance is verified by experiments. It is expected that it can apply to optical system for measurement and inspection in industry fields.

• Corrosion Science and Technology
• /
• 제11권2호
• /
• pp.43-47
• /
• 2012

Recently, regulatory bodies quite often encourage to adopt risk-based inspection (RBI) and management programs because they can enhance safety simultaneously with deregulation in Korea. RBI is an integrated methodology that factors risk into inspection and maintenance decision making. This paper describes an example of how to use known risk assessment codes (API 580, API 581 BRD) to address such safety analysis requirements for risk management in the refining industry. Specifically, this paper reports the methodology and the results of implementation to the Crude Distillation Unit(CDU) plant of refinery units using the $KGS-RBI^{TM}$ program, developed by the Korea Gas Safety Corporation in reference of API Codes and ASME PC (Post Construction) with a suitable consideration of Korean situation. The results of the risk and reliability assessment using $KGS-RBI^{TM}$ program are useful in determining whether the detected defects are tolerable or required to be repaired. The subsequent decisions are to manage the future inspection, repair and maintenance planning in the risk reduction control.

• 한국안전학회지
• /
• 제7권3호
• /
• pp.60-65
• /
• 1992

As many industrial workers have been involved with computer terminal tasks, for example, monitor ing, inspection, or computer da4a entry etc., concerns for difficulty evaluation of computer terminal tasks are Increased. This study provides that eyeblink can be used as a means of difficulty evaluation of a computer terminal lask. Four subjects without color blindness are asked to perform the monitoring task of the binary choice type under five levels of task difficulty. In each task, eyeblink rates and eyeblink interval times were measured from the subjects. The results show that the eyeblink rate does decrease with an Increase in task difficulty. In addition, it was found that both eyeblink interval time and eyeblink Interval time variation increased with an increase in task difficulty. It was concluded that the change of eyeblink rate, eyeblink interval time and eyeblink interval time and eyeblink interval time variation could be regarded as a generalized response to the imposition of task difficulty.

• Communications for Statistical Applications and Methods
• /
• 제23권6호
• /
• pp.555-562
• /
• 2016

Interval censored data often occur in an observational study where the subject is followed periodically. Instead of observing an exact failure time, two inspection times that include it are available. There are several methods to analyze interval censored failure time data (Sun, 2006). However, in the presence of competing risks, few methods have been suggested to estimate covariate effect on interval censored competing risk data. A sub-distribution hazard model is a commonly used regression model because it has one-to-one correspondence with a cumulative incidence function. Alternatively, Klein and Andersen (2005) proposed a pseudo-value approach that directly uses the cumulative incidence function. In this paper, we consider an extension of the pseudo-value approach into the interval censored data to estimate regression coefficients. The pseudo-values generated from the estimated cumulative incidence function then become response variables in a generalized estimating equation. Simulation studies show that the suggested method performs well in several situations and an HIV-AIDS cohort study is analyzed as a real data example.

• 한국국방경영분석학회지
• /
• 제18권1호
• /
• pp.110-127
• /
• 1992

In the preventive replacement policies of system that the failure can be detected through only periodic inspection, there is a penalty cost associated with the lapsed time between system failure and its detection. The system under study is replaced if the system fails before $n^{th}$ inspection, otherwise, preventive replacement is performed at the $n^{th}$ inspection. The decision variables are the inspection interval and the period of preventive replacement. This study presents the optimal preventive replacement policy that minimizes the long-run expected cost per unit time.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.216-220
• /
• 2022

This paper proposes an inspection robot that can operate on a single square rail. Various inspection robots have been developed to identify emergency situations in industrial environments, such as those involving fires or individuals with cardiac arrest. Because the robots must operate in wide areas and long tunnels, they are designed to move along a rail installed on the ceiling. Double rail track are typically used to ensure the stability of robot movement. However, the cost for installing a double rail track is nearly two times that for a single rail track. Moreover, it is challenging to install double rail tracks while ensuring the same curvature and interval between the two rails. Therefore, in this study, an inspection robot that operate on a single square rail track is developed. To ensure stable movement in the longitudinal and lateral directions, two passive guide parts are used, and the main active wheel is allowed to move on the upper side of the square rail. The prototype was manufactured, and experiments were performed for different robot velocities.

• Communications for Statistical Applications and Methods
• /
• 제23권4호
• /
• pp.335-341
• /
• 2016

Interval censored failure time data often occurs in an observational study where a subject is followed periodically. Instead of observing an exact failure time, two inspection times that include it are made available. Several methods have been suggested to analyze interval censored failure time data (Sun, 2006). In this article, we are concerned with a binary time-varying covariate whose changing time is interval censored. A modified estimating equation is proposed by extending the approach suggested in the presence of a missing covariate. Based on simulation results, the proposed method shows a better performance than other simple imputation methods. ACTG 181 dataset were analyzed as a real example.

• 대한산업공학회지
• /
• 제23권4호
• /
• pp.817-824
• /
• 1997

This paper is concerned with a parallel system that sustains a time-independent load and consists of n components with exponential lifetimes. It is assumed that the total load is shared by the functioning components and the failures of components induce higher failure rates in the surviving components according to the relationship between the load and the failure rates. The power rule model among several load-failure rate relationships is considered. Firstly, the reliability function is obtained. Secondly, the optimization problem in this load-sharing parallel system is considered. The optimal redundant units and inspection interval are obtained. Some numerical examples are studied.

• 한국안전학회지
• /
• 제14권2호
• /
• pp.155-162
• /
• 1999

reliability from components reliability. In this case, it assumes that components failure is mutually independent, but it may not true in real systems. In this study, the mean cost per unit time is computed as the ratio of mean life to the mean cost. The mean life is obtained by the reliability function under power rule model. The mean cost is obtained by the mathematical model based on the inspection interval. A heuristic method is proposed to determine the optimal number of redundant units and the optimal inspection interval to minimize the mean cost per unit time. The assumptions of this study are as following : First, in the load-sharing k-out-of-n:G system, total loads are applied to the system and shared by the operating components. Secondly, the number of failed components affects the failure rate of surviving components as a function of the total load applied. Finally, the relation between the load and the failure rate of surviving components is set by the power rule model. For the practical application of the above methods, numerical examples are presented.

• 경영과학
• /
• 제24권1호
• /
• pp.77-90
• /
• 2007

Taguchi assumed that a product characteristic has the uniform distribution in its preventive maintenance limit when deriving the expected loss generated by the quality deviation. But it is reasonable to assume that a product characteristic has the normal distribution than the uniform distribution. On this paper, we first find the optimum inspection interval and the optimum preventive maintenance limit under the truncated triangular distribution. Secondly we use the beta-general distribution and compare with the truncated triangular distribution. By using the numerical examples, we find the optimum inspection interval and the optimum preventive maintenance limit under their distributions. As a result, we find that the beta-general distribution gives the best solution and easy calculation.