• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.251-254
• /
• 2003

For improving the flow capacity of pipeline system the hydraulic inspection method was developed conducting on-site with survey of pipeline facility such as diversion work, air vent, etc. and pipe network analysis. The pipe network analysis method determine pipe diameter with trial and error. The validity of the hydraulic inspection method proved adapting on S-district pipeline system.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.229-236
• /
• 1998

Port structures are one of the important infrastructure of the nation. To ensure safety and extend lifetime of the existing port structures, it is necessary to develop proper maintenance program. In this study, port inspection manual for pier type structure are developed. The flow of inspection program is designed and defect type for each component of wharf is classified. Also systematic method of rating and evaluation is developed together with conceptual design of port maintenance data base system.

• Nuclear Engineering and Technology
• /
• 제30권2호
• /
• pp.148-163
• /
• 1998

Flow Induced Material Degradation (FIMD) is reviewed focusing on Flow Accelerated Corrosion (FAC) models. Several examples of FAC related incidents are described, which include nuclear and fossile power plants. Lastly, mitigation techniques such as inspection, material selection, water chemistry, temperature, and hydrodynamic factor are discussed.

• 인터넷정보학회논문지
• /
• 제22권6호
• /
• pp.1-8
• /
• 2021

With the rapid growth of intelligent devices and communication technologies, 5G network environment has become more heterogeneous and complex in terms of service management and orchestration. 5G architecture requires supportive technologies to handle the existing challenges for improving the Quality of Service (QoS) and the Quality of Experience (QoE) performances. Among many challenges, traffic steering is one of the key elements which requires critically developing an optimal solution for smart guidance, control, and reliable system. Mobile edge computing (MEC), software-defined networking (SDN), network functions virtualization (NFV), and deep learning (DL) play essential roles to complementary develop a flexible computation and extensible flow rules management in this potential aspect. In this proposed system, an accurate flow recommendation, a centralized control, and a reliable distributed connectivity based on the inspection of packet condition are provided. With the system deployment, the packet is classified separately and recommended to request from the optimal destination with matched preferences and conditions. To evaluate the proposed scheme outperformance, a network simulator software was used to conduct and capture the end-to-end QoS performance metrics. SDN flow rules installation was experimented to illustrate the post control function corresponding to DL-based output. The intelligent steering for network communication traffic is cooperatively configured in SDN controller and NFV-orchestrator to lead a variety of beneficial factors for improving massive real-time Internet of Things (IoT) performance.

• 대한안전경영과학회지
• /
• 제7권4호
• /
• pp.101-110
• /
• 2005

The likelihood of failure for the thinning of high temperature sulfide and naphthenic acid corrosion, which affect to a risk of facilities, was analyzed through the risk based inspection using API-581 BRD. We found that the corrosion rate was increased with increasing temperature and total acid number(TAN). And maximum value of the technical module subfactor(TMSF) was not varied with operating condition, but the TMSF was sensitively changed at the range of low temperature, low flow rate, and high TAN. Also, the TMSF was increased as an used year and inspection effectiveness increased, but it was increased as thickness, inspection number, and over design decreased.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.95-101
• /
• 2000

In this paper, an improved method for magnetic inspection to detect surface of a conductor is presented. The presented method is based on the technique of ECP(Electric Current Perturbation), which is to measure the variation of current flow due to defects with a magnetic sensor. The inspection performance is improved by using high frequency current behaviors in order to concentrate the current near the defect and employing the resonant frequency of a search coil as an operating frequency. By analytical results and experiments of the test specimens, the feasibility of the inspection method is shown.

• 산업경영시스템학회지
• /
• 제24권63호
• /
• pp.101-110
• /
• 2001

This study is concern with the design of experiment planning for quality improvement in flow shop manufacturing system. In this study, the procedure of two stage experiment planning are proposed and applied to the manufacturing process of Li/$MnO_2$ batteries. The result of in this paper is that, compared with the current process conditions, 52% of the insulation inspection process, 81.6% of the first premier discharge process, 98.5% of the second premier discharge process, 84.7% of O.C.V./C.C.V. process, and 86.2% of voltage inspection process are decreased. After a given period of time, the life of the batteries extends to 75 hours, which means the 15% improvement in capacity. In case that the proposed methods are applied to the process Improvements of the flow shop manufacturing system, the much effected in experimental cost- saving and quality improvement.

• 비파괴검사학회지
• /
• 제23권4호
• /
• pp.364-371
• /
• 2003

In this paper, a review of the current status, on the use of long range cylindrically guided wave modes, and their interaction with cracks and corrosion damage in pipe-like structures will be discussed. Applications of cylindrically guided ultrasonic wave modes have been developed for inspection of corrosion damage in pipelines at chemical plants, flow-accelerated corrosion damage (wall thinning) in feedwater piping, and circumferential stress corrosion cracks in PWR steam generator tubes. It has been demonstrated that this inspection technique can be employed on a variety of piping geometries (diameters from 1 in. to 3 ft, and wall thickness from 0.1 to 6 in.) and a propagation distance of 100 meters or more is sometimes feasible. This technique can also be used in the inspection of inaccessible or buried regions of pipes and tubes.

• 대한기계학회논문집A
• /
• 제38권1호
• /
• pp.59-63
• /
• 2014

타원형 기어는 오발 유량계에 사용되는 특수기어로써 타원형 모양에 의해 생긴 공간으로 물을 흘려보내 계측한다. 본 연구의 목적은 타원형 기어의 가공정도를 판단하고 불량을 가려내는 시스템을 머신비전을 이용하여 개발하는 것이다. 각종 산업분야에서 자동화가 확산되면서 머신미전의 수요는 늘고 있으며 업계전반의 생산공정 중 검사 공정에서 빼놓을 수 없는 인자가 되었다. 하지만 머신비전을 이용한 기어측정은 기어의 형상이 복잡하다는 이유로 잘 사용되지 않고 있다. 본 연구에서는 머신비전을 이용한 검사 프로그램으로 타원형 기어의 측정이 가능함을 보였으며 본 연구에서 설계한 타원형 기어의 가공정도를 판단할 수 있었다.

• 지적과 국토정보
• /
• 제51권2호
• /
• pp.5-20
• /
• 2021

지하공간통합지도는 2014년도에 전국적으로 발생했던 싱크홀을 계기로 15종의 지하정보를 통합한 국가공간정보로서, 2015년부터 지속적으로 구축되고 있다. 그러나 최근까지도 온수관 파열, 통신구 화재, 지반 침하 등과 같은 지하공간에서의 재난·재해가 지속적으로 발생함에 따라 지하정보의 품질 향상에 대한 요구가 증대되고 있는 실정이다. 이에 본 논문에서는 지하공간통합지도 데이터의 품질 향상을 위한 방안을 마련하고자 하였다. 특히 지하공간통합지도를 통해 관리되는 15종의 지하정보 중 신규 구축 비중이 가장 높은 지하시설물(구조물형) 데이터의 품질검증 개선 방안을 제시하였다. 대부분 육안검수로 진행되고 있는 현재의 검수 방식을 개선하기 위해 품질검사 기준을 좀 더 구체화·세분화하고자 하였다. 이를 위해 현재 품질요소, 세부요소, 세세부요소, 품질검사 기준으로 구성된 검사항목에 품질검사 방법, 품질검사 규칙, Flow Diagram, 해결 가능 오류 유형 항목을 추가하여 속성정보 뿐 아니라 도형정보까지 소프트웨어로 자동검수하기 위한 알고리즘을 개발하였다.