• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.313-315
• /
• 2001

The power system automation, especially the substation automation is a major issue. so it has been widely studied each country in the world. Since the substation system includes lots of measuring devices. a lot of data and system information are transmitted to operators. The measured values usually have the error that results from the communication process, and it can degrade the reliability of estimated values. So. the detection and correction of measured values at a substation are important factors for substation automation. In this paper, we study the detection and col of measured values at the domestic 154kV/2 distribution substation of double bus structure study will be useful for expected economic dispatch measuring device's inspection and corr management by SCADA system operation, substation automation.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.41-47
• /
• 2004

This study is aimed to measure the deflection of loaded table on machine tool. The deflection rate is measured then the table is in a stationary state and is moved. In conclusion we have found that the more load increases, the more the table deflections. Also, we have found that the deflection rate increases in accordance with the speed of movement. Therefore, we have concluded that inspection of machine tool should be done considering the weight of load and the speed of movement. However, since the condition of accuracy test for domestic brand of machine tool is defined as unloaded case, measures should be explored only for loaded case.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.577-582
• /
• 2001

Identification of damage of structures has recently received considerable attention in the light of maintenance and safety assessment under service loads. In buildings, the current techniques of safety assessment largely depend on partial experiments such as visual inspection, destructive and nondestructive tests which lead to overconsumption of time and cost as well as higher labor intensity. Therefore, a new trial for safety assessment is urgently needed today. In this respect, the vibration characteristics of buildings have been applied steadily to obtain a damage index of the whole building, but it cannot be established as a practical method until now. This study is aimed at investigating the application of damage identification methods using vibration characteristics of building. Numerical tests are performed on a apartment building. From the test results, it is observed that severity and location of damage can be estimated with a relatively small error by using natural frequency and mode shape data.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.224-229
• /
• 2007

This paper presents a camera calibration method using several images for three dimensional measurement applications such as stereo systems, mobile robots, and visual inspection systems in factories. Conventional calibration methods that use single image suffer from errors related to reference point extraction in image, lens distortion, and numerical analysis of nonlinear optimization. The camera parameter values obtained from images of same camera is not same even though we use same calibration method. The camera parameters that are obtained from several images of different view for a calibration target is usaully not same with large error values and we can not assume a special probabilistic distribution when we estimate the parameter values. In this paper, the median value of camera parameters from several images is used to improve estimation of the camera values in an iterative step with nonlinear optimization. The proposed method is proved by experiments using real images.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.73-81
• /
• 2002

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method is relatively simple with an acceptable accuracy. In this paper, a new method is studied to acquire 3D geometric data of the small object such as a die in stone model. When the devices, cameras, laser beam and object are in a perfect plane, the calculation becomes very simple with less error. But this paper shows that arbitrarily positioned system can also be used to obtain 3D data.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.3-9
• /
• 2004

The machining parts must be produced within the specification of drawing and those will be able to meet function and efficiency. At that time. it is necessary not only precision machine or machining technique but also the measurement technique is very important. So. the improvement of precise measurement technique is to be joined together at once with improvement of product technique. Finally. he quality and value of the parts are decided by precision measurement. This paper aims to study on he measurement uncertainty when the machined parts are inspected with 3-dimensional coordinate measuring machine. The objectives are to remove an error of measurement and to improve quality and productivity of the mass products.

• 한국정밀공학회지
• /
• 제17권7호
• /
• pp.209-216
• /
• 2000

Recently, Wearable Computers have been applied to medical equipments, inspection system, military and various fields of industries. To support the various application of wearable computer, many researches into the input device for wearable computer have been executed. This paper describes the glove-like hand input system for wearable computer. the characteristics of sensed values, and coupling effects between each sensor. Using these characteristics and coupling effects, the general relation between flexion angles of joints and the values from sensors are proposed as exponential functions. Also, the error range of sensed values is proposed and the glove-like hand input system is calibrated as well by the experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.459-463
• /
• 1996

The lateral-shearing interferometer specially devised for production line inspection lenses is presented. The interferometer is composed with immersion oil and four prisms whose relative sliding motion provide lateral-shearing and phase-shifting. A special phase-measuring algorithm of a-bucket is adopted to compensate the phase-shifting error caused by the thickness reduction in the immersion oil Three different algorithm for determinating quantitative aberration of aspherical lenses are presented and compared with one another.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.624-629
• /
• 2014

The purpose of this study is to carry out the task of engine hesitation which occurred intermittently in driving due to the defective CKPS of LPI vehicles. As the result of the wrong data from the equipment of D-logger, the signal error of CKPS caused the engine hesitation. We performed a study in the followings to analyze and investigate the cause effectively. First, we have investigated the control wiring harness and connector pin contact defect inspection. Second, we have inspected the defection of CKPS separately. From this study, it was found that the engine hesitation were caused by the bad durability and we have showed how to diagnosis the fault of the engine hesitation intermittently while driving. Therefore, it is determined that we have to improve the durability of the CKPS through a strict quality control and to increase the reliability.

• Journal of Biosystems Engineering
• /
• 제24권1호
• /
• pp.67-74
• /
• 1999

A prototype cut-flower sorter was developed and tested for its performance with five varieties of roses. Support plates driven by a chain mechanism transported the roses into an image inspection chamber. Color image processing algorithms were developed to evaluate the length, thickness, and straightness of stem and color, height, and maturity of bud. The average absolute errors of the system for the measurements of stem length, stem thickness, and height of bud were 19.7 mm, 0.5 mm, and 3.8 mm, respectively. The results of classification by the sorter were compared with those of a human inspector for straightness of stem and maturity of bud. The classification error for the straightness of stem was 8.6%, when both direct image and reflected image by a mirror were analyzed. The accuracy in classifying the maturity of bud varied among the varieties, the smallest for‘Nobless’(1.5%) and the largest for‘Rote Rose’(13.5%). The time required to process a rose averaged 2.06 seconds, equivalent to the capacity of 1,600 roses per hour.