• 교육시설
• /
• 제14권4호
• /
• pp.34-42
• /
• 2007

The investment of BTL(Build-Transfer-Lease) projects for the educational facilities has been increased since 2005. However, many trial errors and problems have been occurring due to the lack of inspection criteria in maintenance cost for the lift cycle of the facilities. Thus, purpose of this study is to derive regression equation for the daily inspection and the regular inspection through analysis of CAD data in order to set the inspection criteria. It is possible to calculate economical maintenance cost of BTL project in educational facilities using criteria of inspection time through the regression equation developed in this study.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.121-127
• /
• 2012

Vehicle Inspection System is to examine the condition of vehicle regularly at the national level to protect lives and properties of the people from traffic accidents due to vehicle's fault. However, the vehicle inspection method, criteria, period and effectiveness have become a controversial issue, because of examining safety management of vehicle by drivers regardless of regular vehicle inspection. Therefore, the aim of this study is to investigate vehicle inspection timeliness and risk level of inspection items through basic statistical survey and portfolio analysis. The results of the research through practical analysis are: (1) The inspection failure rates between 3 and 6 model year tend to increase. (2) The failure of inspection items for safety highly impacts on traffic accident rate in terms of accident risks. (3) According to the result of portfolio analysis, faulty items located 1st quadrant are riding device, driveline system, controlling device, steering actuator, and fuel system.

• 대한산업공학회지
• /
• 제35권3호
• /
• pp.194-202
• /
• 2009

In this paper, we address an optimization problem and a case study for minimizing the cost of inspections incurred throughout an inspection system, which includes a K-stage inspection system, a source inspection shop, and a re-inspection shop. In order to formulate the inspection cost function, we make a time-based flow analysis between nodes (or shops), and derive the limiting sizes of flows between nodes and limiting defective rates by solving a set of nonlinear balance equations. It turns out that the number of items reworked throughout the inspection system is invariant irrespective of the defective rate of items moved through the K-stage inspection system. Hence we define the inspection cost as the total number of items inspected, and we provide an enumeration method for determining an optimal value of K which minimizes the number of items inspected.

• 품질경영학회지
• /
• 제23권3호
• /
• pp.69-83
• /
• 1995

In a large number of literature on of inspection tasks, one of the most consistent findings is the existence of large and consistent differences among inspectors. It is possible that the individual difference is described by the difference of cognitive skills, because cognitive skills are required more than manual skills in inspection tasks. Therefore, a set of cognitive factors in human information processing may underly human performance in inspection tasks. In this study, a cognitive skill was described as the relative importance of the cognitive factors involved. A hierarchical task analysis and a fuzzy hierarchical analysis were used to represent how the importance of cognitive factors contribute to inspection performance. An experiment was conducted using the computer simulations of PCB inspection tasks. The results revealed that the subject group with better performance showed the importance weights of cognitive factors in the following rank; (attention, perception, judgement, classification, recognition)<(detection)$\ll$(memory). The results of the experiment can serve as a selection criterion for efficient inspection performance and the information of skilled learning for an inspection training program. The usefullness of a hierarchical task analysis and a fuzzy hierarchical task analysis for the analysis of cognitive tasks are also confirmed.

• Industrial Engineering and Management Systems
• /
• 제16권1호
• /
• pp.1-21
• /
• 2017

This paper discusses a reverse supply chain (RSC) which consists of the process flows from procurement of used products collected from a market, through remanufacturing products from the used products, to sales of the products in a market. In general, it is conceivable for the RSC to face the uncertainty in quality of used products collected from a market. Inspection is one of efficient methods to deal with the problem regarding quality of used products. However, there is a trade-off between inspection cost and inspection accuracy. This paper focuses on the following five types of inspection: (1) 100% inspection, (2) sampling inspection, (3) sampling inspection with screening of rejected lots, (4) sampling inspection with screening of acceptable lots, and (5) no inspection, and determines the optimal operation consisting of the optimal number of procured used products and the optimal inspection policy. Numerical analysis clarifies not only how changes of conditions of the RSC affect the manufacturer's optimal operation but also features of each inspection type. In addition, from the results of numerical analysis, this paper shows the usability to add the proposed inspection in this paper, the sampling inspection with screening of acceptable lots, to choices of inspection type.

• 산업공학
• /
• 제24권1호
• /
• pp.87-96
• /
• 2011

In this paper, we address an optimization problem for minimizing the inspection and rework cost in an inspection-rework system, which forms a network of nodes including a K-stage inspection system, storage areas for items, a source inspection shop, and a re-inspection shop. We assume that (n, 0) acceptance sampling is performed in the source inspection shop and that only 100(1-r)% of items of rejected lots are re-inspected in the re-inspection shop. Since all the nodes are interrelated, in order to formulate our steady-state objective function, we make a steady-state network flow analysis between nodes, and derive both the steady-state amount of flows between nodes and the steady-state fraction defectives by solving a nonlinear balance equation. Finally we provide some fundamental properties and an enumeration procedure for determining the optimal values of (K, r) which both minimizes our objective function and attains a given target average outgoing quality.

• 한국항해항만학회지
• /
• 제31권2호
• /
• pp.151-157
• /
• 2007

After World Trade Center's Terror in 2001 and promulgating Maritime Transportation Security Act (MTSA, 2002) and Security and Accountability For Every Port Act (SAFE Port Act, 2006) in the United States, most of the attention on security of international transportation including marine carrier and facility has focused increasingly. Inspection stations in foreign seaport terminal including Busan, South Korea, have been installed by Container Security Initiative (CSI) and Customs Trade Partnership against Terrorism (C-TPAT). The inspection station, however, may directly and indirectly affect delay of truck turnaround time in the seaport, especially high and severe level of security. This paper was analysed a risk for the additional average delay of truck turnaround time incurring by the inspection station under the all level of security, C-TPAT and CSI. As a result of this risk analysis, the higher weighted inspection time based on raising security level, the less number of trucks to be inspected, which will derive high delay in the inspection station.

• 한국항해항만학회지
• /
• 제33권8호
• /
• pp.589-594
• /
• 2009

Major Inspection은 Major Oil Companies (이하 Major라 함)에 의해 탱커를 대상으로 시행되는 자발적인 선박검사이다. Major의 화물을 운송하기 위해서 탱커는 Major Inspection에 합격해야만 한다. 따라서 Major Inspection이 자발적인 검사라고는 하지만 선사의 영업이익과 밀접한 관련이 있기 때문에 선주 및 탱커 승무원들에게는 어느 검사보다 중요한 검사이다. 본 연구에서 저자들은 실태분석을 통해 Major Inspection과 관련된 문제점을 파악하고 그에 따른 개선방안을 제시하였다. 실태분석을 위해 관련문헌과 통계자료를 조사할 뿐만 아니라 이익 당사자, 예를 들면, 탱커 승무원, 선박회사 담당자, 검사관 등을 대상으로 설문조사 및 인터뷰를 실시하였다.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1869-1873
• /
• 2010

For reliable operation of oil-filled electrical equipment, monitoring and maintenance of insulating oil is essential. Dissolved gas analysis(DGA) is widely used for monitoring faults in high voltage electrical equipment in service. Therefore, oil analysis should be monitored regularly during its service life. KEPCO has investigated thousands of dissolved gas analysis data since 1985, and conducted studies on the relationship of gas in oil analysis and internal inspection results of transformer. As the results, KEPCO revised criteria for transformer diagnosis and has applied it since 2008. Almost of 100 cases of internal inspection results since 2001 have been investigated. This paper presents the correlation of the fault-identifying gases with faults found in actual transformers and how should we approach to internal inspection of transformer by dissolved gas analysis.

• 전기학회논문지P
• /
• 제64권2호
• /
• pp.45-49
• /
• 2015

This paper presents a quantitative analysis method to quantitatively indicate a electrical fire preventive effect of safety inspection for electrical facilities for general use. Logic model was developed based on whether enforcement of safety inspection for electrical facilities, and then the developed analysis model was converted to hydraulic model by using mathematical logic. The electrical fire preventive effect of safety inspection for electrical facilities was quantitatively calculated by applying electrical safety inspection results and fire statistics for five years to the developed hydraulic model. The results show that electrical fire preventive effects of 5,542 cases on annual average for five years.