• 대한수학회보
• /
• 제60권6호
• /
• pp.1477-1496
• /
• 2023

A class of normalized univalent functions f defined in an open unit disk of the complex plane is introduced and studied such that the values of the quantity zf'(z)/f(z) lies inside the evolute of a nephroid curve. The inclusion relations of the newly defined class with other subclasses of starlike functions and radius problems concerning the second partial sums are investigated. All the obtained results are sharp.

• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1429-1436
• /
• 2011

본 논문에서는 튜브의 내부에 이물질이 있거나, 조명에 의한 영상잡음이 많은 경우에도 내경중심과 내경을 정확하게 측정할 수 있는 머신비전 기반의 새로운 측정알고리즘을 제안하였다. 또한 내경과 외경 중심간의 이격거리인 편심량도 계산할 수 있다. 제안된 알고리즘은 퍼지제어에 바탕을 둔 반복탐색에 의하여 임의의 초기탐색점에서 거리와 방향을 단계적으로 이동함으로써 내경의 중심에 도달하게 한다. 제안된 알고리즘은 계산시간 뿐만 아니라 측정정밀도 면에도 기존의 방법에 비해 우수하였다. 성능을 비교하기 위하여 생산현장에서 생산되는 튜브들을 이용하여 실험을 수행하였고, 실험 결과 제안된 알고리즘을 사용하는 경우가 널리 사용되고 있는 알고리즘인 Hough 변환 방식과 RANSAC 방식보다 계산시간 및 측정정밀도에서 우수함을 보였다.

• 한국환경과학회지
• /
• 제20권10호
• /
• pp.1309-1317
• /
• 2011

This study selected 6 river reach, which have various curved-channel, included in an object of study as making the Nakdong River, which is a real nature river, as a point of an object of study by using SMS RMA-2 model, a 2D numerical analysis model, and applied project flood and analyzed and examined characteristic of hydrological property and super-elevation, which includes characteristic of the velocity of a moving fluid. As a result, in a river reach, whose width is wide, angle of curved-channel has impact on the velocity of a moving fluid of inside of curved-channel and in a river reach, whose width is narrow, the radius of curvature and width of the river have impact on the velocity of a moving fluid of inside of curved-channel. Also it found out that the ratio of reduction in water-level of inside of curved-channel is more bigger than ratio of increasing in water-level of outside of curved-channel when project flood is increasing and angle of curve is increasing. Based on this, this study would be used as a expectation of danger and preliminary data in planning real river or a business, that creates an environment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1167-1172
• /
• 2007

Generally inpipe robot needs force above standing for contacting robot to pipe. If the environment of the pipe-inside does not change, there is not a problem. But if the pipe radius change, or occur the obstacle which it does not intend, problem gets. So it uses a different system and must know an environment change, and changing the shape or a form of the robot. The research uses the flexible leg and is the robot which is adapted to the environment change of the pipe. The advantage of this robot is possible to move when it does not need to recognize a change of environment of pipe. Leg is bend with one direction. When it moves part that there are legs effect of leg direction the robot is moved with only one direction. If friction between legs and pipe is sufficient, not only verticality pipe moving, but also curved pipe moving. Also the obstacle of the pipe inside occurs and the diameter of the pipe inside changes, this robot can move if it does not use another system or device.

• 한국지반공학회논문집
• /
• 제34권10호
• /
• pp.51-60
• /
• 2018

최근 해상 작업을 위한 새로운 시공기술로서 대형원형강재 가물막이 공법이 제안되었다. 본 구조물은 원형 형상의 가물막이이기 때문에 가물막이의 형상에 따른 침투해석 연구가 필요하다. 그러므로, 본 연구에서는 흐름해석을 수행하여 원형 가물막이에 대하여 벽체 내부로의 침투 유량을 산정하였다. 흐름해석에 이용된 수치모델링은 2열의 널말뚝을 가진 가물막이에 대하여 제안된 이론해와 비교하여 검증하였다. 흐름조건의 경우 축대칭 흐름조건의 침투유량이 2차원 흐름조건의 침투유량과 비교하여 1.55배 크게 나타났으므로 2차원 축대칭 흐름조건을 적용하였다. 벽체 반경, 벽체의 지중 근입깊이 그리고 벽체 내외부의 수위차 등을 변화시키며 변수연구를 수행한 결과, 침투유량은 벽체의 근입깊이와 벽체 반경이 증가할수록 감소하는 것으로 나타났다. 최종적으로, 대형원형강재 가물막이의 침투유량을 산정할 수 있는 간이식을 제안하였다.

• 열처리공학회지
• /
• 제6권1호
• /
• pp.1-8
• /
• 1993

In this paper, the surface roughness influenced by Sm45C hardness in high frequency induction hardening and mechanical characteristics for the changed Hv 598 part and the unchanged hardness Hv 223 part by use of cermet and ceramic cutting tools was experimentally examined. Finally, we could be had some important results by processing surface roughness on cutting conditions such as cutting speed, feed rate, depth of cut and changes of tool nose radius. The results are summarized as follows. 1. In case of the same cutting condition, the hardness of workpiece was high and acquired the best processing surface roughness when the radius of the tool nose had 0.8 mm and feed rate was 0.04 mm/rev. 2. In case of the hardness of workpiece, though the cutting speed didn't have an effect on processing surface roughness, the less feed rate and the more processing surface roughness improved. On the other hand, the low inside the hardness of workpiece, the more cutting speed and the more feed rate increase, the processing surface of roughness improved. 3. Regardless of the hardness of workpiece, the change of the cutting depth didn't have great effect on the surface roughness. 4. On cutting the high surface hardness part with cutting tools of cermet and ceramic, it can be acquired the higher processing surface roughness because it hadn't been taken effect on cutting speed, In case of the cutting process of the low inside hardness part the two cutting tools have acquired the similar processing surface roughness.

• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.630-636
• /
• 2016

In this paper, a novel triple-mode cavity structure, designed for compactness and operating at 850 MHz, is analyzed. A cylindrical dielectric resonator is loaded into a metallic cylindrical cavity. Previous study has been focused on the analysis of the cylindrical dielectric resonator, but in this paper, the effect of the cylindrical metallic cavity has been analyzed. Enclosing the dielectric resonator inside the metallic cavity increases the resonant frequency of the dielectric resonator; however, this increases the quality factor and introduces the possibility of installing coupling screws. The principle of generation of triple-mode was investigated by parametric analysis. The generated triple-mode is TE011 mode and two orthogonally generated HEM121 modes. By adjusting the radius of the dielectric resonator, the height of the dielectric resonator, or the radius of the cylindrical metallic cavity, three modes could be coincided. However, the height of the metallic cavity keeps three modes separated. The mode characteristics of the proposed cavity are analyzed using a full-wave electromagnetic (EM) simulation. The proposed triple-mode cavity could be developed to triple-mode filter using a coupling screw, and the commercial application for the miniaturized filter below 1 GHz could be expected.

• 한국광학회지
• /
• 제8권2호
• /
• pp.107-110
• /
• 1997

NBUR(Negative Branch Unstable Ring) 공진기를 갖는 Nd:YAG 레이저의 원고리형 출력광속을 이용하여 무회절 광속을 발진시켰다. Scraper 출력경을 통하여 나오는 원고리형 광속은 평면화된 위상파면을 갖고 있을 뿐 아니라 균일한 공간적 세기 분포를 가지므로 무회절 광속을 발진시키는데 직접 사용할 수 있으며 높은 출력세기 밀도를 갖게 할 수 있다는 장점이 있다. 구성된 NBUR 레이저의 출력광속의 단면은 내경 2.5 mm 외경 5 mm인 크기를 가졌다. 5 m 초점거리를 갖는 Fourier 변환 렌즈를 레이저 출력경으로부터 초점거리만큼 떨어진 지점에 설치하여 원고리형 출력광속의 먼거리 형태를 관측하였으며, 렌즈를 통하여 13 m 이상의 위치에서도 광속의 퍼짐이 없음을 확인하였다.

• 한국군사과학기술학회지
• /
• 제12권3호
• /
• pp.259-265
• /
• 2009

In the traditional percussion locks of small arms, a firing pin is struck by a hammer rotating on a single center of rotation, which makes the percussion mechanism simple and reliable. In order to strike the firing pin by the hammer, however, the firing pin should be located within the radius of rotation of the hammer. As the distance between the striking point of the firing pin and the center of rotation of the hammer becomes longer, the radius of rotation of the hammer should also be increased, which results in the increase of the volume and weight of the small arms because the hammer needs the more space for its operation inside of the small arms. In this paper, a link type percussion lock was newly proposed in order to overcome the limitation of designing small arms when using traditional percussion locks, as mentioned above. The link type percussion lock was modeled by using multi-body dynamics software and designed to satisfy the requirements such as striking force level of the hammer exerting on the firing pin enough to detonate the percussion cap of ammunitions and the safety on the accidental drop. It was applied to the newly developed dual-barrel weapon system, in which the weight and overall length are important design factors, and verified by durability test and drop test on the ground.

• Membrane and Water Treatment
• /
• 제4권2호
• /
• pp.127-142
• /
• 2013

In order to investigate the significance of "salting-out" and "pore swelling" effects on the nanofiltration of neutral solutes, rejection properties of two NF ceramic and polymeric membranes were studied with single polyethyleneglycol (PEG) solution and mixed PEG/inorganic electrolyte solutions. For both membranes, the rejection rate of PEG was found to decrease significantly in the presence of ions. In the case of the ceramic membrane (rigid pores), this phenomenon was imputed to the sole partial dehydration of PEG molecules induced by the surrounding ions. This assumption was confirmed by the lowering of the PEG rejection rates which followed the Hofmeister series. Experimental data were used to compute the resulting decrease in the Stokes radius of PEG molecules in the presence of the various salts. Concerning the polymeric membrane, the decrease in the rejection rate was found to be systematically higher than for the ceramic membrane. The additional decrease was then ascribed to the swelling of the pores. The experimental data of rejection rates were then used to compute the variation in the mean pore radius in the presence of the various salts. The pore swelling phenomenon due to accumulation of counterions inside pores was supported by electrokinetic charge density measurements.