• 대한치과교정학회지
• /
• 제46권4호
• /
• pp.189-198
• /
• 2016

Objective: The purpose of this study was to analyze stress distributions in the roots, periodontal ligaments (PDLs), and bones around cylindrical and tapered miniscrews inserted at different angles using a finite element analysis. Methods: We created a three-dimensional (3D) maxilla model of a dentition with extracted first premolars and used 2 types of miniscrews (tapered and cylindrical) with 1.45-mm diameters and 8-mm lengths. The miniscrews were inserted at $30^{\circ}$, $60^{\circ}$, and $90^{\circ}$ angles with respect to the bone surface. A simulated horizontal orthodontic force of 2 N was applied to the miniscrew heads. Then, the stress distributions, magnitudes during miniscrew placement, and force applications were analyzed with a 3D finite element analysis. Results: Stresses were primarily absorbed by cortical bone. Moreover, very little stress was transmitted to the roots, PDLs, and cancellous bone. During cylindrical miniscrew insertion, the maximum von Mises stress increased as insertion angle decreased. Tapered miniscrews exhibited greater maximum von Mises stress than cylindrical miniscrews. During force application, maximum von Mises stresses increased in both groups as insertion angles decreased. Conclusions: For both cylindrical and tapered miniscrew designs, placement as perpendicular to the bone surface as possible is recommended to reduce stress in the surrounding bone.

• The Korean Journal of Pain
• /
• 제10권2호
• /
• pp.225-230
• /
• 1997

Background: Authors modified the traditional continuous axillary brachial plexus block technique of Selander for purpose of increasing success rate and decreasing complications by use of commercial epidural anesthesia set. Method: Thirty-nine patients scheduled for upper extremity operations were injected with 40 ml of anesthetic solution by axillary perivascular technique, using 23~25G immobile needle at 2 cm from the pectoralis major. Tuohy needle was immediately introduced at 4 cm from the pectoralis major and pierced the expanded neurovascular sheath at an angle of 30 degree to the skin. The "pop" was well noted well. Needle was advanced 0.5 to 3.0 cm and epidural catheter introduced through the needle. After removal of needle, occlusive dressing was done. Tip of catheter and spread of solution were demonstrated by fluoroscopy with contrast dye after completion of procedure. Result: Catheter insertion was successful at first attempt for all case. Total length of insertion was from 6 to 13($10.0{\pm}1.7$) cm. Tip of catheter was placed in infraclavicular space(66.7%), about the humeral head(17.9%) and in upper arm in 3 cases as U-shape(7.9%). Catheters were maintained for $6.7{\pm}2.6$(3-12) days. There were no complications such as: perforation of major vessels, needle trauma to nerve, infection, bleeding or hematoma. Conclusion: This study demonstrated continuous axillary brachial plexus block with epidural anesthesia set is safe, easy and convenient modification of technique of Selander.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제16권2호
• /
• pp.103-109
• /
• 2016

Background: One nostril must be selected for nasotracheal intubation. In some cases, structural anomalies within the nasal cavity hinder the insertion of the tube or complications, such as epistaxis, develop. This study examined the possibility of using radiography to select the nostril that would induce fewer complications. Methods: Four hundred and five patients who underwent nasotracheal intubation under general anesthesia were studied. A 7.0-mm internal diameter nasal right angle endotracheal (RAE) tube and 6.5-mm internal diameter nasal RAE tube were inserted into men and women, respectively. Complications were considered to have developed in cases in which insertion of the tube into the nasal cavity failed or epistaxis occurred. The tube was inserted into the other nostril for insertion failures and hemostasis was performed in cases of epistaxis. The degree of nasal septal deviation was determined from posteroanterior skull radiographs or panoramic radiographs; the incidence of complications was compared depending on the direction of the septal deviation and the intubated nostril. Results: The radiographs of 390 patients were readable; 94 had nasal septum deviation. The incidence of complications for cases without nasal septum deviation was 16.9%, that for cases in which the tube was inserted into the nostril on the opposite side of the deviation was 18.5%, and that for cases in which the tube was inserted into the nostril with the deviation was 35.0%, showing a high incidence of complications when intubation is performed through the nostril with septum deviation (chi-square test, P < 0.05 ). Conclusions: Although there were no differences in the incidence rates of complications between intubation through the left nostril and that through the right nostril, radiological findings indicated that incidence of complications significantly increased when the tube was inserted into the nostril with the septum deviation.

• Journal of Korean Neurosurgical Society
• /
• 제29권5호
• /
• pp.635-639
• /
• 2000

Objective : Surgery for the microvascular decompression is mostly concerned with injury to the cranial nerves or brain stem by cerebellar retraction. Intraopeartive brain stem auditory evoked potentials(BAEPs) has been continuously monitored on surgery to evaluate the extent of injury, recovery of the nerves and prognosis. Methods : Of the 161 cases of CP angle surgery from Feb. 1996 to Apr. 1998, 103 cases were monitored during operation. Thirty five patients who had undergone similar surgery were selected and evaluated ; 23 patients were monitored and 12 were not during surgery. If monitor showed more than 0.5 mSec delay of latency, surgeon was given a warning not to retract brain any more. If more than 1mSec delay, surgeon was informed to stop surgery and wait for the returning of evoked potentials. The level of amplitudes and delay of latencies during the initial stage of operation, opening the dura, insertion of teflon patches, and closing the dura and recovery were then compared. Resuls : Twenty patients were male and 15 were female. Their average age was 50.26 years. Mean amplitude during the initial stage of operation was $0.60{\pm}0.25mV$, at opening the dura $0.56{\pm}0.26$, after teflon patches insertion $0.49{\pm}0.20$, and after closure of dura $0.47{\pm}0.28mV$. Mean latency during the early stage of operation was $6.08{\pm}0.67mSec$, at opening of dura $6.38{\pm}0.55$, insertion of teflon $6.97{\pm}0.59$, and closing the dura $6.17{\pm}0.54$. There was statistical significance in the difference of amplitudes between each procedures, and in the difference of latencies. For the complete recovery of amplitude and latency, it usually took average 5.65 minutes(0-20 min). In monitored group, only one patient required more than 20 minutes to recover and suffered from hearing disturbance after surgery. Others were recovered within 10 minutes without complications. However, 4 out of 12 patients who were not monitored showed hearing disturbance, and 1 patient had temporary facial palsy and dizziness(p＝0.000). Conclusion : The results indicate that continuous intraoperative monitoring of BAEPs during CP angle surgery is seen mandatory procedure to prevent operative complications.

• 대한전자공학회논문지SD
• /
• 제48권9호
• /
• pp.6-12
• /
• 2011

본 논문에서는 장거리, 저 손실 FTTH 구성에 필요한 현장조립 광커넥터(FIOC)의 접속 신뢰성과 성능 향상을 위한 방법을 제시한다. 이를 위해 FIOC의 내부 광섬유(inner fiber)와 외부 광섬유(field fiber)의 접속 면 각도를 최적화하여 별도의 각도 맞춤 툴과 광섬유 유각 절단기(fiber angled cleaver) 없이 조립하여도 저 손실 접속이 가능하도록 하였다. FIOC의 내부 광섬유(inner fiber)의 각도를 angled cleaver를 이용해 $2^{\circ}$로 고정하고, 외부 광섬유(field fiber)는 일반 광섬유 절단기를 이용해 오차를 포함해서 $0^{\circ}{\sim}1^{\circ}$의 각도로 서로 접속하여 삽입손실은 0.3dB 이내로 줄이고, 반사손실은 -60dB 이하를 유지 할 수 있도록 하였다.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2129-2138
• /
• 2016

The full-bridge inverter, widely used for single-phase photovoltaic grid-connected applications, presents a leakage current issue. Therefore, an AC bypass branch is introduced to overcome this challenge. Nevertheless, existing modulation strategies entail drawbacks that should be addressed. One is the zero-crossing distortion (ZCD) of the AC current caused by neglecting the AC filter inductor voltage. Another is that the system cannot deliver reactive power because the AC bypass branch switches at the power frequency. To address these problems, this work proposes an optimized hybrid modulation strategy. To reduce ZCD, the phase angle of the inverter output voltage reference is shifted, thereby compensating for the neglected leading angle. To generate the reactive power, the interval of the negative power output is calculated using the power factor. In addition, the freewheeling switch is kept on when power is flowing into the grid and commutates at a high frequency when power is fed back to the DC side. In this manner, the dead-time insertion in the high-frequency switching area is minimized. Finally, the performances of the proposed modulation strategy and traditional strategies are compared on a universal prototype inverter. Experimental results validate the theoretical analysis.

• 센서학회지
• /
• 제25권1호
• /
• pp.8-12
• /
• 2016

A planar, light-weight, and low-cost notch filter structure is required for the KSTAR ECEI (Electron Cyclotron Emission Imaging) system to protect the mixer arrays from spurious plasma heating power. Without protection, this heating power can significantly degrade or damage the performance of the mixer array. To protect mixer arrays, a frequency selective surface (FSS) structure is the suitable choice as a notch filter to reject the spurious heating power. The FSS notch filter should be located between the lenses of the ECEI system. This paper presents a 170 GHz FSS notch filter for the KSTAR ECEI sensor application. The design of such an FSS notch filter is based on the single-sided square loop geometry, because that makes it relatively insensitive to the incident angle of incoming wave. The FSS notch filter exhibits high notch rejection with low pass-band insertion loss over a wide range of incident angles. This paper also reviews the simulated and measured results. The proposed FSS notch filter might be implemented in other millimeter-wave plasma devices.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권3호
• /
• pp.180-185
• /
• 2012

Purpose: An accurate preoperative analysis of the patient is essential in orthognathic surgery in order to acquire superior results. In profile, the location of the chin's position may change according to the neck's inclination. This may ultimately affect the amount of surgical movement. During acquisition of cephalometric radiographs, or in supine position, there is a discrepancy in the neck's inclination. This means that there are also various discrepancies between the actual profile and the various preoperative profile images. In the clinical situation, the decision in performing genioplasty usually lies in the analysis of the patient's profile on the operating table at the final stages of orthognathic surgery. This study aims to analyze the different preoperative profile images and to compare their discrepancies. Methods: Fifty eight patients undergoing orthognathic surgery were chosen. These patients were divided into three groups according to angle's classification of malocclusion, as class I, II or III. The right profile of these patients in centric occlusion was taken in natural head position (NHP). This was set as the 'actual profile image.' Another right profile image was taken on the operating table after insertion of the nasotracheal intubation and with muscle relaxants in effect. This was also taken in centric occlusion. The angle (denoted 'A') between the soft tissue glabella-pognion and the true vertical plane was found in the above-mentioned profile images and in the cephalometric radiographs. The differences of these values were analyzed. Results: There were differences in Angle 'A' in all of the preoperative images. These values were however, not statistically significant. Conclusion: In order to gain an esthetic profile during orthognathic surgery, the NHP is shown to be the most reliable position. Images reproducing such head positions should be used in the treatment planning process.

• 한국전자파학회논문지
• /
• 제14권7호
• /
• pp.769-776
• /
• 2003

본 논문은 경계적분법과 세그멘테이션 기법을 이용하여 광대역 주파수 및 광 조향각 범위에서 빔조향이 가능한 마이크로스트립 로트만 렌즈의 해석 및 설계를 제안하고 있다. 렌즈 각 포트간의 모든 상호결합과 다중반사 및 선로간 불연속 특성이 해석에 포함되었다. 등간격 포트 설계를 통해 광조향각 범위에서 배열포트의 출력 리플을 억제하는 구조를 구현하였다. 12 입력 12 출력의 각 포트에 지수함수 테이퍼를 적용하여 임피던스 정합 및 포트간 상호결합을 해석하고 최적화하였다. 제작된 렌즈는 측정결과 6~18 GHz의 광대역 주파수 범위와 $\pm$53$^{\circ}$의 조향각 범위에 대해 $\pm$1.8 dB 이하의 삽입손실 편차와 1$^{\circ}$이하의 조향 정확도를 가지며, 해석결과 와도 잘 일치함을 확인하였다.

• 대한치과의사협회지
• /
• 제15권11호
• /
• pp.763-766
• /
• 1977

The Purpose of this study was to observe force required to remove some kinds of pin from dentin. The teeth were embedded within a resin cylinder and the occlusal surface was sectioned at a right angle to the axis of the cylinder to expose dentin surface. Thread mate system pin (minim and regular), friction Iocked pin and cemented pin were tested Pin holes were drilled by handpiece and depths of pin holes were tested 1,2 and 3mm. After insertion of the pins into pinhole, tensile loading was performed on the Instron testing machine at the speed of 0.5 inch/min. Results were follewed: 1. In retention, the cemented pins are the least, the friction locked pins intermediate and the self threading pins the greatest in all pins. In self threading pins, regalar pin has greater retention than minim pin 2. The deeper the depth of the pin hole is, the more the retention of the pin increases.