• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.617-621
• /
• 2008

Sequential passes through $Sephadex^{TM}$ columns were used to select phages that displays ligands for dextran ($\alpha$-1,6 linked linear chains) from a phage antibody library. Those phages that bound to the $Sephadex^{TM}$ in each iteration were replicated in E. coli. A phage preparation isolated on the third round selection produced 5.4 nephelos turbidity units (NTU) in a dextran specific immunonephelometric assay, a 2.2 fold higher value than the phage preparation from the first round selection. This phage gave $72\;{\pm}\;10$ normalized intensity (N.I.) in a dip-stick assay against high molecular size dextran (T2000, $2\;{\times}\;10^6) and significantly lower color ($30\;{\pm}\;6$ N.I.) against low molecular size dextran (T10, $10^4$). The presence of an Fab insert in each of these phages was confirmed using a $\beta-galactosidase linked assay and polymerase chain reaction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.1
• /
• pp.404-421
• /
• 2020

A reversible data hiding scheme in JPEG compressed bitstreams is proposed, which could avoid decoding failure and file expansion by means of removing of bitstreams corresponding to high frequency coefficients and embedding of secret data in file header as comment part. We decode original JPEG images to quantified 8×8 DCT blocks, and search for a high frequency as an optimal termination point, beyond which the coefficients are set to zero. These blocks are separated into two parts so that termination point in the latter part is slightly smaller to make the whole blocks available in substitution. Then spare space is reserved to insert secret data after comment marker so that data extraction is independent of recovery in receiver. Marked images can be displayed normally such that it is difficult to distinguish deviation by human eyes. Termination point is adaptive for variation in secret size. A secret size below 500 bits produces a negligible distortion and a PSNR of approximately 50 dB, while PSNR is also mostly larger than 30 dB for a secret size up to 25000 bits. The experimental results show that the proposed technique exhibits significant advantages in computational complexity and preservation of file size for small hiding capacity, compared to previous methods.

• Korean Journal of Plant Resources
• /
• v.20 no.6
• /
• pp.491-498
• /
• 2007

It has been hypothesized that efficient exclusion of methylated retrotransposons and repeated DNA region is one of the rapid and cost-effective approaches for comprehensive gene discovery in large genome size of maize. Three kinds of methylation-sensitive restriction enzymes, HapII, MspI and McrBC, were used to identify the restriction frequency of cytosine methylation sites in maize genome. Roughly 60% of total maize genomic DNA was restricted less than 500bp by McrBC, and the most of restricted small size fraction was composed retrotransposon. In order to validate the efficient construction of gene-rich shotgun library, we compare two gene-rich methyl-filtration shotgun libraries using in vivo and in vitro methyl-filtration system. The size selected DNA fraction by Sau3A-McrBC enzyme treated was very stable and has not appeared modification in E. coli, but most insert DNA size of partially digested with Sau3A were decrease less than 500bp by bacterial methylation-modification system. In compare of retroelements portion, A 44.6% of the sequences were retroelement in unmethyl-filtered library, and the most of them was Copia type, such as Prem, Opie and Ji. The portion of retroelement was drastically decreased to 25% and 20% by in vivo and in vitro filtration system, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.70-74
• /
• 2004

There are many researches being in process to develop the information storage devices applying to the portable devices recently. Based on this need, the information storage devices have to be satisfied with the fast access time, the robustness of the system, high data transfer rate and lower media price. The total size of the drive must design to adapt the portable devices such as CF II card or PC II card size. This paper proposes the swing arm type actuator to insert the designed actuator in the drive of the CF II size. Hereafter the research will be going on to be suitable to the physical standard and design the focus magnetic circuit newly. The swing arm type actuator including this circuit is designed to have the dynamic characteristic satisfying the mechanical specification as well as the BD 1x. Finally, the adaptability to the portable devices was demonstrated by the finite element analysis and optimization of structural part.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.300-305
• /
• 2003

Reduced activation ferritic (JLF-1) steel is leading candidates for blanket/first-wall structures of the D-T fusion reactor. In fusion application, structural materials will suffer effects of repeated changes of temperature. Therefore, the data base of tensile strength and fracture toughness at operated temperature $400^{\circ}C$ are very important. Fracture toughness ($J_{IC}$) and tensile tests were carried out at room temperature and elevated temperature ($400^{\circ}C$). Fracture toughness tests were performed with two type size to investigate the relationship between the constraint effect of a size and the fracture toughness resistance curve. As the results, the tensile strength and the fracture toughness values of the JLF-1 steel are slightly decreased with increasing temperature. The fracture resistance curve increased with increasing plane size and decreased with increasing thickness. The fracture toughness values of JLF-1 steel at room temperature and at $400^{\circ}C$ shows an excellent fracture toughness ($J_{IC}$) of about $530kJ/m^2\;and\;340kJ/m^2$, respectively.

• Microbiology and Biotechnology Letters
• /
• v.18 no.6
• /
• pp.640-646
• /
• 1990

We have cloned the cdd gene from E. coli C600 using (cdd-) as a host. From the sequenced promoter region of E=, coli cdd gene which has been determined by Valentin-Hansen P. (1985), we synthesized the 23 mer oligonucleotides corresponding to the transcription initiation region and used as a probe for cloning of the cdd gene by Southern blotting. The isolated fragments in the blotting were introduced to the colony hybridization after transforming it into the E. coli JF611 (cdd-, pyr double mutant), and we identified the hybridized band at 27 kb long. From the original insert of 27 kb fragment in theBamHI site of pBR322, the 5.3 kb fragment containing the cdd gene was isolated by subsequent deletion and subeloning. From the derived plasmid pTK509, further deletion and subcloning were performed and clarified that the cdd gene was located in the 2.1 kb of SaZI/DraI segment in the insert of pTK605. The polypeptide encoded by the cloned DNA was appeared to be a molecular mass of 33,000.

• Korean Journal of Microbiology
• /
• v.30 no.1
• /
• pp.37-41
• /
• 1992

The KEM1 gene is known to affect microtubule and spindle pole body function during the cell division cycle in Saccharomjyces cerevisiae. To identify new genes with functions similar or related to those of KEM1, we isolated a high copy suppressor gene (ROK1) that suppresses the kem1 mutation when cloned on a high copy number plasmid but not on a low copy number plasmid. Two clones which suppress both the benomyl hypersensitivity and the $Kar^{-}$ enhancing phenotype of kem1 null mutation were isolated and were shown to have a 9.0 kb identical insert by restriction endonuclease analysis. The restriction map constructed indicates that this suppressor gene, ROK1 is not KEM1. Subcloning experiments suggest that the functional region of ROK1 is at least 3.0kb in size.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.4
• /
• pp.12-20
• /
• 2017

The ablation characteristics of graphite nozzle throat insert was analyzed for the use in solid rocket propulsion system. The propulsion system was composed of three types of conventional nozzles, such as De-Laval type, blast tube type, and submerged type. Various kinds of propellants were used in ten kinds of propulsion system that had different shapes with each other. Total forty eight tests were performed. From the results of the analysis, it was found that the ablation rate was increased for the higher average chamber pressure and the higher oxidizer mole fraction. A useful correlation for nozzle throat ablation rate was developed in terms of the chamber pressure, oxidizer mole fraction, and throat size. The calculated ablation rates from the correlation showed agreement within ${\pm}0.10mm/s$ with the experimentally determined values.

• 연구논문집
• /
• s.30
• /
• pp.101-110
• /
• 2000

Weft insertion mechanism is for completing the structure of yarn and weft yarn and its driving method is screw type. In the high speed rapier loom, weft yarn is thrown by insert rapier and carrier rapier into the shed which make divide two parts of upper part ant lower part for warp yarn. It is possible for this mechannism to reduce the size of rapier and wheel, and directly connected to the main shaft without gear belt. Therefore, exact rapier motion through realization of arbitrary acceleration diagram requested rapier and optimal design for high speedization and operating rate increasing are necessary. In this study, with a view to exact system analysis for understanding of overall trace and high speedization of rapier loom through computer simulation. we report not only deduction of displacement, velocity, and acceleration components of rapier for analysis theory establishment, of weft insertion mechanism and exact motion induction according to screw rotation, but also development of simulation program for realization these on the monitor.

• Journal of Welding and Joining
• /
• v.25 no.5
• /
• pp.45-50
• /
• 2007

The Ni-base superalloy GTD111 DS is used in the first stage blade of high power land-based gas turbines. Advanced repair technologies of the blade have been introduced to the gas turbine industry over recent years. The effect of the filler metal powder on Transient Liquid Phase bonding phenomenon and tensile mechanical properties was investigated on the GTD111 DS superalloy. At the filler metal powder N series, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid filler metal powder was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solids in the bonded interlayer grew from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The bond strength of N series filler metal powder was over 1000 MPa. and ${\gamma}'$ phase size of N series TLP bonded region was similar with base metal by influence of Ti, Al elements. At the insert metal powder M series, the Si element fluidity of the filler metal was good but microstructure irregularity on bonded region because of excessive Si element. Nuclear of solids formed not only from the base metal near the bonded interlayer but also from the remained filler metal powder in the bonded interlayer. When the isothermal solidification was finished, the content of the elements in the boned interlayer was approximately equal to that of the base metal. But boride and silicide formed in the base metal near the bonded interlayer. And these boride decreased with the increasing of holding time. The bond strength of M series filler metal powder was about 400 MPa.