• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.1021-1027
• /
• 2012

In this paper, multi-string power balancing system for streetlight was developed. Accordingly, the components of the system was developed, unit converters, MPPT control unit, a bank of Li-ion battery and controls the charging and discharging. Loss by improving the efficiency of the system through the parallel operation of the unit converter output will be reduced. And by improving the efficiency of the system through the unit converter parallel operation, output losses will be reduced. Charging and discharging efficiency of the device used in a typical solar streetlight is calculated based on the maximum power input. Because of the variation of the input power has a weakness. In this paper, flexible to changes in the input, and a system was developed to minimize the cost per watt. Measure the performance of the unit module from the system, the result was more than 91%. And the charging capacity 12 V/105 Ah, module power 180 W, respectively. Should expect to be able to improve performance through continuous monitoring in the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.722-725
• /
• 2004

Voltage step-down characteristics in Ring/Dot type piezoelectric transformer were examined as a function of the area of input electrode when the area of output electrode is fixed. The effects of driving frequency and load resistance on the voltage step-down characteristics were also examined. Voltage gain was greatly dependent on the driving frequency and load resistance, and showed a maximum gain at resonance frequency of the step-down transformer. The frequency where the maximum output voltage appears increased about 0.2% as the load resistance increased from 10 to $150\Omega$. As the area of input electrode increased, the voltage gain and the efficiency of the transformer increased. Frequency dependence of efficiency of the step-down transformer revealed a similar tendency with the voltage gain curves. The maximum efficiency remarked 94% when the input voltage and the load resistance were 20 $V_{PP}$ and $120\Omega$, respectively.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.365-371
• /
• 2019

Recently, the demonstration and research on the power transmission using high voltage DC such as HVDC(High Voltage DC), Smart Grid, DC transmission and distribution have been actively conducted. In order to control the power converter in high-voltage DC power transmission system, SMPS(Switching Modulation Power Supply) for power converter control using high-voltage DC input is essential. However, the demand for high-pressure SMPS is still low, so the development is not enough. In the low-output SMPS using the high-voltage input, it is difficult to achieve high efficiency due to the switching transient loss especially at light load. In this paper, we propose a new switching scheme for high power SMPS control for low output power. The proposed method can provide better efficiency increase effect in the light load region compared to the existing PWM method. To verify the feasibility of the proposed method, a 40 W SMPS for HVDC MMC(Modulation Multi-level Converter) was designed and verified by simulation.

• 전력전자학회논문지
• /
• 제24권1호
• /
• pp.66-69
• /
• 2019

This study proposes a high-efficiency phase-shifted full-bridge (PSFB) converter with a wide input voltage range. The conventional PSFB converter is a useful topology in high-power applications. This converter not only achieves the zero-voltage switching of the primary switches, but also has small RMS current in the primary side. However, because the conventional PSFB converter has large freewheeling current in the primary side when it is designed considering the hold-up time of the converter, such a converter has high conduction loss at the primary switches. To solve this problem, a new PSFB converter is proposed in this study. The experiment is implemented with an input voltage ranging from a 320 V-400 V and an output power specification of 715 W.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.359-369
• /
• 2014

Due to the severe market conditions, pre-entrepreneur seeks to start their business through franchise company. This paper, using the data envelopment analysis(DEA) method, examines efficiency of a group of franchise company in order to provide efficiency information with pre-entrepreneur. Output-oriented DEA model is applied in the investigation of efficiency, and the overall efficiency score is decomposed into pure technical efficiency and scale efficiency. The input variables selected to evaluate the efficiency are franchise deposit, franchise contribution cost and the output variables are sales and number of franchises, and length of business. The results of this paper show franchise industry have the low level of overall efficiency and the main sources of inefficiency is found technical rather than scale. As a result, this paper provides not only the current status of efficiency information of a franchise with pre-entrepreneur but also give warning when they sign-up with franchise business.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.5116-5131
• /
• 2017

This paper studies the radio frequency to direct current (RF-DC) conversion efficiency of rectennas applicable to wireless power transfer systems, where multiple receive antennas are arranged in serial, parallel or cascaded form. To begin with, a 2.45 GHz dual-diode rectifier is designed and its equivalent linear model is applied to analyze its output voltage and current. Then, using Advanced Design System (ADS), it is shown that the rectifying efficiency is as large as 66.2% in case the input power is 15.4 dBm. On the other hand, to boost the DC output, three composite rectennas are designed by inter-connecting two dual-diode rectifiers in serial, parallel and cascade forms; and their output voltage and current are investigated using their respective equivalent linear models. Simulation and experimental results demonstrate that all composite rectennas have almost the same RF-DC conversion efficiency as the dual-diode rectifier, yet the output of voltage or current can be significantly increased; in particular, the cascade rectenna obtains the highest rectifying efficiency.

• 한국전자통신학회논문지
• /
• 제10권8호
• /
• pp.945-952
• /
• 2015

GaN 전력증폭소자를 이용한 전력증폭기의 고효율 특성을 구현하기 위하여 $50{\Omega}$으로 정합된 전력증폭소자는 적용 주파수 대역, 출력전력, 효율 특성 선정의 한계가 있으므로 본 연구에서는 source/load-pull 시험을 통한 측정 데이터를 기반으로 고출력, 고효율 특성의 설계 목적에 맞는 정량적 입력 및 출력 임피던스를 추출하여 고효율 전력증폭기를 구현하였다. 구현된 전력증폭기는 2.7-3.1GHz의 주파수 대역에서 25watt(44dBm), 66-76%의 PAE특성 나타낸다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.385-388
• /
• 1994

This paper presents a new configure rectifier which has improved input power factor and efficiency for DC arc weldings. Two rectifiers are series connected and they are single-phase full-wave phase controlled rectifiers that use a transformer with two center-tapped secondary. The input power factor can be improved by controlling the each phase of rectifiers sequentially, and then the efficiency can be also improved because the reactive component currents will be reduced. It is confirmed that the proposed rectifiers has about 80% of input power factor and efficiency with the experimental results which are carried out at the output ranges of 100A to 300A.

• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.83-93
• /
• 2006

A new high efficiency and low profile on-board DC/DC converter for digital car audio amplifiers is proposed. The proposed converter shows low conduction loss due to the low voltage stress of the secondary diodes, a lack of DC magnetizing current for the transformer, and a lack of stored energy in the transformer. Moreover, since the primary MOSFETs are turned-on under zero-voltage-switching (ZVS) conditions and the secondary diodes are turned-off under zero-current-switching (ZCS) conditions, the proposed converter has minimized switching losses. In addition, the input filter can be minimized due to a continuous input current, and an output inductor is absent in the proposed converter. Therefore, the proposed converter has the desired features, high efficiency and low profile, for a viable power supply for digital car audio amplifiers. A 60W industrial sample of the proposed converter has been implemented for digital car audio amplifiers with a measured efficiency of $88.3\%$ at nominal input voltage.

• 한국항만경제학회지
• /
• 제18권1호
• /
• pp.3-26
• /
• 2002

The purpose of this paper is to Investigate the productive efficiency and competitive strength of world container ports using the DEA, Super-efficiency, and FDH methods with the raw data from previous research by Jun et al.(1993). The super-efficiency measure examines the maximal radial change In input, outputs for an observation to remain efficient. Therefore, it provides a means of distinguishing between efficient observations, which would otherwise seem identical. FDH provides a good test mechanism for examining the practical implications of the choice available among alternative efficiency measures and orientations, because of the lack of convexity of its production possibility set. Both methods are complementary to DEA. This paper follows the traditional productivity analysis method overcoming the limitation of previous studies by using the DEA, FDH and Super-efficiency methods, and proposing in measure the relative competitive strength of worldwide container ports. The main empirical results of this paper are as follows: Firstly the ports of Singapore, Hongkong, Kilrung, Busan, Tokyo. and Longbeach were found to be efficient In the CCR model. The ports of Felixstowe, Bangkok, Singapore, Hongkong, Kilung, Busan, Tokyo, and Longbeach were found to be efficient in the BCC model. Secondly, super. efficiency rankings under CRS and input-oriented model are as follows: Longbeach, Keelung, Singapore, Busan, Tokyo, and Honkong. However, it was difficult In differenciate the rankings under the VRS and input-oriented model. due to major difficulties posed by the ports of Singapore, Hongkong, and Longbeach. Thirdly, the FDH method shows that the inefficient ports are Bremerhaven, Antwerp, Le Havre, Kobe, Seattle, New York The policy Implications of this study are as follows: Firstly, when port authorities want to measure the international competitive strength of container ports and enhance their productive efficiency, they should consider the traditional method as well as introducing the Super-efficiency and FDH methods. Secondly, according to the analysis results of the super-efficiency and FDH methods, poll authorities should recommend benchmarks ports and dominated ports as reference ports in order to enhance the productive efficiency of their container ports that have an efficiency rating of less than 1. Efficient ports whose efficiency ratings are over 1 in the Input-oriented Super-efficiency model should also consider the usage of input and output elements used by more efficient ports.