• East Asian Journal of Business Economics (EAJBE)
• /
• v.9 no.1
• /
• pp.41-51
• /
• 2021

Purpose - The purpose of this study is to propose strategies of improving efficiency of 20 listed port companies in China based on analysis of their input-output indexes from 2014 to 2018. Research design, data, and methodology - In this paper, the relevant input-output indicators of 20 listed port companies in China from 2014 to 2018 were adopted. Data derived from the company annual reports announced by Shanghai stock exchange and Shenzhen stock exchange. Comprehensive efficiency and pure technical efficiency were measured from output perspective by DEA and Malmquist index, and efficiency changes and regional efficiency were analyzed. Result - The results showed that the efficiency value of 20 listed port companies in China fluctuated and increased during 2014-2018, regional efficiency was unbalanced, and change of MPI was influenced by internal factors and external factors. Listed port companies affected by internal and external factors needed to make appropriate response to internal and external factors. Conclusion - The research conclusion can provide important reference information about management and planning for port companies in China and related areas. However, this paper is limited to the availability of data. So the improvement scheme for listed companies in inefficient regional ports needs further study, such as using AHP method.

• Journal of Satellite, Information and Communications
• /
• v.1 no.1
• /
• pp.59-64
• /
• 2006

The broadband power detector for power amplitude envelope detection of the direct-conversion Six-port output signal was designed and implemented in this paper. The power detector should be linearly operated to produce the linear amplitude and phase signal for input RF signals in required broadband frequency range. The power detector should be designed under conditions of matching circuit with low VSWR, which protect unbalanced phase signal from reflection signal due to mismatch between the output port of a six-port and the input port of a power detector. The designed power detectors, which were implemented in L-band with 50 ohm matching and Ku-band with multiple LC matching circuits and isolator, respectively, were analyzed in viewpoints of the utilization as a power detector of direct conversion Six-port. The dynamic range of designed power detectors were also measured and rvaluated as a power detector of Six-port circuit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1687-1695
• /
• 2021

In this paper, it is designed and analyzed the beamforming antenna using the butler matrix. The operating frequency of the proposed beamforing antenna is ISM band of 2.4 GHz band and the component of the beamforing antenna consisted of a 1×4 array antenna and a 4×4 butler matrix. Each output port of 4×4 butler matrix outputs the signal having a different phase, it is provided to each input port of 1×4 array antenna. The beamforming antenna with four output ports forms a total of four beams. In order to analyze the radiation pattern of the beamforming antenna, it was provided by switching the signal to the input port and proceeded the Individual analysis for the input port 1 to 4. The main beams of the proposed beamforming antenna were formed in the -12°, 40°, -40° and 12° directions according to each input port, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.65-71
• /
• 2011

This paper shows variations on bandwidth for the 5-microstrip 4-port structure by cutting out part of 2nd and 4th line of 5 lines. In 2nd line case, the bandwidth to pass is decreased by 300MHz and one of two input ports operates in diplexer. Both of 2nd and 4th line cut takes each of two input ports as a diplexer. The bandwidth for 4th line case has almost same bandwidth for the unmodified structure, a bit wider than that of the 2nd line case. Especially the isolation between input and other out port in center frequency of stop band shows 41dB for port 1, 32dB for port 2.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.558-568
• /
• 2013

In this paper, a new decoupling technique for a flyback inverter using an active power decoupling circuit with auxiliary winding and a novel switching pattern is proposed. The conventional passive power decoupling method is applied to control Maximum Power Point Tracking (MPPT) efficiently by attenuating double frequency power pulsation on the photovoltaic (PV) side. In this case, decoupling capacitor for a flyback inverter is essentially required large electrolytic capacitor of milli-farads. However using the electrolytic capacitor have problems of bulky size and short life-span. Because this electrolytic capacitor is strongly concerned with the life-span of an AC module system, an active power decoupling circuit to minimize input capacitance is needed. In the proposed topology, auxiliary winding defined as a Ripple port will partially cover difference between a PV power and an AC Power. Since input capacitor and auxiliary capacitor is reduced by Ripple port, it can be replaced by a film capacitor. To perform the operation of charging/discharging decoupling capacitor $C_x$, a novel switching sequence is also proposed. The proposed topology is verified by design analysis, simulation and experimental results.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.235-239
• /
• 2012

This paper presents frequency response compensation technique, and a self-oscillation circuit for capacitive microresonator with the compensation technique using programmable capacitor array, to compensate for the frequency response distorted by parasitic capacitances, and to obtain stable oscillation condition. The parasitic capacitances between the actuation input port and capacitive output port distort the frequency response of the microresonator. The distorted non-ideal frequency response can be compensated using two programmable capacitor arrays, which are connected between anti-phased actuation input port and capacitive output port. The simulation model includes the whole microresonator system, which consists of mechanical structure, transimpedance amplifier with automatic gain control, actuation driver and compensation circuit. The compensation operation and oscillation output of the system is verified with the simulation results.

• Journal of Korea Port Economic Association
• /
• v.18 no.1
• /
• pp.3-26
• /
• 2002

The purpose of this paper is to Investigate the productive efficiency and competitive strength of world container ports using the DEA, Super-efficiency, and FDH methods with the raw data from previous research by Jun et al.(1993). The super-efficiency measure examines the maximal radial change In input, outputs for an observation to remain efficient. Therefore, it provides a means of distinguishing between efficient observations, which would otherwise seem identical. FDH provides a good test mechanism for examining the practical implications of the choice available among alternative efficiency measures and orientations, because of the lack of convexity of its production possibility set. Both methods are complementary to DEA. This paper follows the traditional productivity analysis method overcoming the limitation of previous studies by using the DEA, FDH and Super-efficiency methods, and proposing in measure the relative competitive strength of worldwide container ports. The main empirical results of this paper are as follows: Firstly the ports of Singapore, Hongkong, Kilrung, Busan, Tokyo. and Longbeach were found to be efficient In the CCR model. The ports of Felixstowe, Bangkok, Singapore, Hongkong, Kilung, Busan, Tokyo, and Longbeach were found to be efficient in the BCC model. Secondly, super. efficiency rankings under CRS and input-oriented model are as follows: Longbeach, Keelung, Singapore, Busan, Tokyo, and Honkong. However, it was difficult In differenciate the rankings under the VRS and input-oriented model. due to major difficulties posed by the ports of Singapore, Hongkong, and Longbeach. Thirdly, the FDH method shows that the inefficient ports are Bremerhaven, Antwerp, Le Havre, Kobe, Seattle, New York The policy Implications of this study are as follows: Firstly, when port authorities want to measure the international competitive strength of container ports and enhance their productive efficiency, they should consider the traditional method as well as introducing the Super-efficiency and FDH methods. Secondly, according to the analysis results of the super-efficiency and FDH methods, poll authorities should recommend benchmarks ports and dominated ports as reference ports in order to enhance the productive efficiency of their container ports that have an efficiency rating of less than 1. Efficient ports whose efficiency ratings are over 1 in the Input-oriented Super-efficiency model should also consider the usage of input and output elements used by more efficient ports.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1025-1033
• /
• 2011

In this paper, we introduce the contactless power transmission device for transmitting the power with the resonant characteristic of the cavity resonator. When transmitting the power, the contactless power transmission device begins to work in the condition where the transceiver adheres closely. The transceiver is electrically separated because there is no conductive terminal outside and the size of the receiver required for the electric power transmission can be minimized. The cavity resonator comprises slots for the input port and output port in the upper side conductor plate of the cavity and forms the input port and output port using the stripline structure at this upper part. The some of output port is separated from it and the electric power receiver is formed thus the union can be possible. The rest except electric power receiver become the electric power transmitter, which includes the input port of stripline-slot coupling, cavity, and the slot of the output port. If the transmitter and the receiver are combined, they become the form in which the electricity is transferred from the input port to the output port in a cavity resonator. The center frequency of the contactless power transmitter manufactured is 5.782 GHz. and $S_{21}$ is measured as -1.07 dB. It is confirmed that the high electric power transfer rate is approximately 78 %.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.531-542
• /
• 2002

An input and output buffering ATM switch conventionally operates in either Queueloss mode or Backpressure mode. Recently, a new mode, which is called Hybrid mode, was proposed to overcome the drawbacks of Queueloss mode and Backpressure mode. In Hybrid mode, when both the destined output buffer and the originfted input buffer are full, a cell is dropped. This thesis analyzes the cell loss rate and the cell delay of Queueloss, Backpressure and Hybrid modes in a switch adopting output-port expansion scheme under uniform traffic. Output-port expansion scheme allows only one cell from an input buffer to be switched during one time slot. If several cells switch to a same destined output port, the number of maximum transfer cells is restricted to K (Output-port expansion ratio). The simulation results show that if an offered load is less than 0.9, Hybrid mode has lower cell loss rate than the other modes; otherwise, Queueloss mode illustrates the lowest cell loss rate, which is a different result from previous researches. However, the difference between Hybrid and Queueloss modes is comparably small. As expected, the average cell delay in Backpressure mode is lower than those of Queueloss mode and Hybrid mode, since the cell delay due to the retransmission of higher number of dropped cells in Backpressure mode is not considered.

• Journal of Korea Port Economic Association
• /
• v.39 no.2
• /
• pp.77-95
• /
• 2023

The regional infrastructure industries of Gwangyang City, the subject of this study, are Gwangyang Port and Gwangyang Steel Mill. Therefore, it is necessary to analyze the regional economic ripple effects of the port logistics industry in Gwangyang City. In this study, a multi-stage approach using the RW and the LQ methodology using the national input-output tables in 2015 and 2019 is used to prepare the regional interindustry analysis chart in Gwangyang City, and an exogenous demand induction model that reclassified the port logistics industry was applied. Through this, the purpose of this study was to provide policy implications by figuring out the regional economic ripple effects of the port logistics industry quantitatively in Gwangyang City. As a result of the analysis, the industries with high production inducement effect and forward/backward linkage effect of the port logistics industry in Gwangyang City were analyzed as manufacturing, transportation, land and air logistics sectors. And the industries in which the added value inducement effect and the employment inducement effect were analyzed as an industry related to the service industry. Therefore, it is necessary to prepare support measures to foster the port logistics industry as a way to promote these industries and revitalize the local economy of Gwangyang City. To this end, it is desirable to improve policies and systems for the vitalization of the Gwangyang port maritime cluster and provide various policy support for the port logistics industry in Gwangyang City. This study is meaningful in suggesting policy implications for the regional economy of Gwangyang City based on the results of exogenous analysis of the port logistics industry in small and medium-sized cities. However, It seems that further studies related to this will be needed in the future.