• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1037-1044
• /
• 2007

In an attempt to determine the correlations between the input acoustic impedance and the variations of the physical characteristics of the terminal elements, a five-lobe branched tube-network is mathematically developed and experimentally simulated using a lung simulator. The model takes into account some realistic conditions such as varying cross-sectional areas, flexible wall properties and branching. The effects of airway constrictions expressed by lobe stiffness variations on the impedance are determined for a range of frequencies up to 256 Hz. It is concluded that the developed model is capable of non-invasively predicting various physiological changes in the airway passages.

• 한국음향학회지
• /
• 제11권6호
• /
• pp.32-40
• /
• 1992

This study shows how the finite element method for the structural problems could be applied in the electromechanical impedance analysis of an in-air piezoelectric cylinder transducer and then compares the numerical results by the FEM with the measured results using the impedance analyzer. The results also show that the comparison between both results could be applied to examine the mechanical properties of the added unknown material to transducer such as an acoustic window.

• 센서학회지
• /
• 제27권6호
• /
• pp.374-379
• /
• 2018

The piezocomposite transducer is widely used because it is highly efficient in transforming electric energy into mechanical energy, and its frequency range is broader than that of other types of ultrasound transducers. A general piezocomposite transducer is composed of an acoustic lens, impedance matching layers, piezoelectric materials, and backing layers. When an input voltage is applied to a piezoelectric material as an active material, it generates sound waves while vibrating. At that time, an impedance matching layer helps the sound waves to propagate forward while reducing the impedance mismatch that may occur at the interface between the active material and its front material. The impedance mismatch has a negative effect on the signal of an ultrasound transducer; thus, it is important to design a matching layer to overcome the issue. In this study, an optimized feature of a matching layer with gradient properties is studied. An objective function is defined to minimize both the average and the deviation of the reflection coefficients that are functions of the frequencies. As a result, an improvement in the signal characteristics with respect to the sensitivity and bandwidth is reported.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1203-1210
• /
• 2017

Switched-inductor (SL) Z-source three-level inverter is a novel high power topology. The SL based impedance network can boost the input dc voltage to a higher value than the single LC impedance network. However, as all the neutral-point-clamped (NPC) inverters, the SL Z-source three-level inverter has to balance the neutral-point (NP) potential too. The principle of the inverter is introduced and then the effects of NP potential unbalance are analyzed. A NP balancing method is proposed. Other than the methods for conventional NPC inverter without Z-source impedance network, the upper and lower shoot-through durations are corrected by the feedforward compensation factors. With the proposed method, the NP potential is balanced and the voltage boosting ability of the Z-source network is not affected obviously. Simulations are conducted to verify the proposed method.

• 한국항공우주학회지
• /
• 제43권2호
• /
• pp.118-124
• /
• 2015

전파흡수구조(RAS)의 설계는 이산최적화 문제로 확률론적 최적화기법이 적용되며, 효율성을 향상시키기 위해서는 오랜 시간이 소모되는 RCS의 계산량을 감소시켜야 한다. 본 논문에서는 임피던스정합을 이용해 RCS 최소화 단층형 RAS를 설계하기 위한 효과적인 방법을 연구하였다. 연구방법에서는 물리광학법(PO)과 최적화기법의 연동을 통해 전파입사조건에 대해 대상의 RCS가 이상적으로 최소화되는 입력임피던스를 계산하였다. 다음으로 RAS의 복소유전율 및 두께는 이산최적화를 통해 계산된 입력임피던스를 최대한 만족하도록 설계되었다. 연구결과 이러한 방법은 다수의 함수계산이 필요한 확률론적 최적화기법으로 RCS를 직접 최소화한 경우와 동일한 RAS 설계치를 도출하였으며, RCS 해석의 수를 효과적으로 줄임으로써 RAS 설계를 위한 최적화에 소모되는 시간을 크게 감소시켰다.

• 대한기계학회논문집A
• /
• 제39권5호
• /
• pp.499-505
• /
• 2015

압전 진동 에너지 수확 장치의 설계 및 성능 평가 시 에너지 변환 효율을 고려하는 것은 매우 당연하다. 본 연구에서 고려하는 에너지 변환 효율은 부하 저항이 부착된 압전 진동 에너지 수확 장치에 입력되는 가진 진동 파워 대비 전기 출력 값으로 정의된다. 기존의 연구에서는 근사적으로 임피던스 정합된 부하 저항에서의 전기 출력을 고려한 반면, 본 연구에서는 최적의 임피던스 정합 값을 사용하여 새롭게 에너지 변환 효율 식을 유도하였다. 유도된 식의 타당성을 검증하기 위해 3 개의 서로 다른 전기-역학 연성 계수 값을 갖는 진동 에너지 수확 장치에 대한 유한 요소 해석 결과를 이용하였다. 또한, 부하 저항의 임피던스 정합 방법의 차이에 따른 에너지 변환 및 변환 효율 특성을 살펴보았다.

• 대한기계학회논문집A
• /
• 제39권1호
• /
• pp.79-87
• /
• 2015

요요 진동시스템을 이용한 파력발전 장치의 모델링 및 성능해석을 수행하였다. 본 연구의 파력발전 시스템은 기계적 요소인 요요진동 시스템, 모션정류 시스템, 동력전달 시스템과 전기적 요소인 발전시스템으로 구성된다. 특히 요요 진동시스템을 적용하여 파랑의 입력을 회전운동으로 변환하였으며 입력되는 파랑의 크기가 공진현상에 의해 증폭되어 높은 에너지 변환효율을 갖도록 구성되었다. 기계적 시스템과 전기적 시스템의 임피던스 연결(Impedance matching)을 통해 기계-전기 통합 해석 모델을 수립하였다. 일정 입력 가속도 0.14g 에서 다양한 파랑 주파수와 시스템 감쇠비에 대한 수치적 성능 해석을 진행하였다. 최대 전기적 출력은 공진주파수에서 부하저항이 최적 부하 조건을 만족할 때 발생하였으며, 이때 최대 전기 출력은 290W, 발전 효율은 48%이다. 해석 결과를 통해 공진 현상을 이용하여 파력발전장치의 출력을 크게 증가시킬 수 있음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.273-277
• /
• 1999

A cold cathode flourescent lamp for the backlight in the notebook computer requires high input voltage about 1300(V) when it turns on. But once a discharge starts, the input voltage can be dropped by about one-third for continued output. The equivalent impedance also varies from open to several dozens of kilo-ohms. The piezoelectric transformer converts electrical energy into mechanical energy and then converts it back to electrical energy at a high voltage. Its high output voltage, high efficiency and small size are suitable for driving the LCD backlight in the notebook computer. The piezoelectric transformer operates near the resonance frequency and the output waveform is close to sine wave with very little noise. This paper suggests an inverter for LCD backlight of notebook computer using piezoelectric transformer that includes voltage to frequency converter for gate signal which is useful for tracking of variable resonance frequency depending on load impedance.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.3075-3083
• /
• 1994

The applications of the electrical transmission line theory to the pressure propagation characteristics in the volume loaded fluid transmission line with step and impulse input wave is demonstrated in this paper. The method is based on the premise that the time response is the inverse Fourier transform of frequency spectrum of the wave which spectrum is a product of frequency spectrum of input pressure wave and system transfer function. The frequency response and transient response of step and impulse input wave in the volume loaded fluid transmission line is analysed by the Laplace transform and inverse Laplace transform with FFT numerical algorithm. The numerical solution of the distributed friction model is compared with the average friction model and the infinite product model. And the result is showed that FFT method may have major advantages for the simulation of fluid circuitary.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권3호
• /
• pp.98-103
• /
• 2001

This paper presents the numerical analysis of piezoelectric devices using three-dimensional finite element analysis. The characteristic of piezoelectric transducer, such as mechanical displacement and electrical are analyzed and the validity is confirmed by experiments Applying the finite element routine to a piezoelectric transformer, the resonance features electrical impedance. the ratio of step-up voltage and vibration mode of piezoelectric transformer are calculated numerically By using three-dimensional finite element method effects of width variation to resonance features, electrical input impedance and the voltage step-up ratio for a piezoelectric transformer, can be considered in design procedure.