• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.223-228
• /
• 2007

This paper deals with the secondary excited induction generator applied to random wave input generation system. As it is preferred to stabilize the output voltage and frequency in the constant level, microcomputer controlled CSI connected to the secondary windings supplies the secondary current with slip frequency. For testing this method, the input torque simulator is constructed, according to the power flow analysis. The experimental and numerical results show the advantage of secondary excited induction generator system for the random input wave generation system.

• Journal of information and communication convergence engineering
• /
• 제7권1호
• /
• pp.46-51
• /
• 2009

In this paper, the two-axis theory is adopted to analyze the secondary excited induction generator applied to random wave input generation system. The analysis by the two-axis theory helps to know the transmitted power of the induction machine. The electric variables, like as primary and secondary currents, voltages, and electric output power, were able to express as equations. These equations are help to simulate the generation system numerical model and to know the transient state of the system. As it is preferred to stabilize the output voltage and frequency in the constant level, microcomputer controlled VSI connected to the secondary windings supplies the secondary current with slip frequency. For testing the appropriateness of this method, the input torque simulator in the laboratory to drive the secondary excited results show the advantage of secondary excited induction generator system for the random input wave generation system.

• 전기학회논문지
• /
• 제63권4호
• /
• pp.461-468
• /
• 2014

An efficiency test for generators is generally required in case of construction of a new power plant or replacement of an existing generator. Generally, the efficiency of generator is measured by the input-output ratio under any given condition. Therefore, the best way is to directly measure the value of input and output power of a generator and calculate the efficiency values. However, it is difficult to measure a generator's input values accurately, especially for large systems. So, we are usually measuring the losses of the generator. But for measuring these values, there are several constraints for test such as preparing additional power generator and releasing the protection relay for manual operation of auxiliary equipments. Therefore, this study suggests that a novel generator efficient test method using the shaft-torque method which can be carried out while the generator is normally operating. The reliability of the result value was verified by comparing with the efficiency test results of the conventional retardation method on IEEE Std 115-1995.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2225-2229
• /
• 2011

Squirrel cage induction motor is the main driving system of industrial field and familiar with its use in a large variety of applications. However, many engineer are unfamiliar with the induction generator, even though no difference exists between both machines except for the mode of operation. But an induction generator is commonly used for micro & small hydro power applications due to its simplicity, reliability, low cost and robustness. Input and output of induction motor has turned against at the induction generator operation. Rotation speed of induction generator is small faster than induction motor. As output of induction machines increases with the increasement of speed, so loss is same. Actually, generator efficiency is lower than motor at this condition. If induction generator is connected with mechanical load, total efficiency is decreased. In this paper, we analyzed that input, output, torque and efficiency is different from each other above and below synchronous speed.

• 한국정보통신학회논문지
• /
• 제18권5호
• /
• pp.1155-1161
• /
• 2014

본 논문에서는 DC-DC 부스트 컨버터의 최소 입력전압을 250mV 까지 낮출 수 있도록 하는 저전압 스타트업 전압 발생기를 제안 하였다. 제안된 스타트업 전압 발생기는 250mV의 입력전압을 500mV 이상으로 승압시켜 커패시터에 충전한다. 이후, 커패시터에 저장된 전압으로 부스트 컨버터를 시동시킴으로써, 250mV의 낮은 입력 전압에서도 부스트 컨버터가 동작을 시작할 수 있도록 하였다. 부스트 컨버터가 정상 동작한 후에는, 부스트 컨버터에 의하여 만들어지는 승압된 출력전압을 다시 부스트 컨버터의 전원으로 사용하게 함으로써, 스타트업 동작 후에는 기존 부스트 컨버터와 동일한 높은 전력 변환 효율로 동작 하도록 하였다. 제안된 스타트업 전압 발생기는 낮은 입력전압에서 트랜지스터의 바디전압을 조절하여 트랜지스터의 문턱전압을 낮춤으로써, 입력전압을 승압시키는 딕슨 차지펌프에 높은 클럭 주파수와 큰 전류를 공급하도록 하였다. 제안된 스타트업 전압 발생기는 $0.18{\mu}m$ CMOS 공정으로 제작되었으며, 250mV의 입력전압에서 생성된 클럭 주파수와 출력전압은 각각 34.5kHz와 522mV였다.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.1013-1018
• /
• 2003

본 논문은 이차여자 유도발전기시스템의 파력발전시스템에의 적용에 관한 연구내용을 요약한다. 불규칙적인 파력 입력에 따라 변화하는 발전기의 출력을 슬립주파수에 맞추어 컴퓨터로 이차전류를 제어하여 출력전압과 출력전류를 안정화시키고자 하였다. 본 논문에서 제안한 방법을 확인하기 위하여 실험실 레벨의 파력 시뮬레이터를 제작한 후 이차여자 유도발전기를 구동하였다. 파력과 같은 불규칙입력 발전시스템에 대한 이차여자 유도발전 시스템의 유효성을 실험적으로 확인하였다.

• 전력전자학회논문지
• /
• 제12권3호
• /
• pp.213-220
• /
• 2007

고속 부하특성을 갖는 장비들이 일반화되면서 탑재형 발전기는 빠른 응답특성을 만족시켜야 한다. 본 논문은 고속 부하용으로 개발된 단극 발전기의 모델링, 시뮬레이션 및 실험 등을 기술한다. 입력 제한기가 있는 단극 발전기의 시뮬레이션 모델이 만들어졌고, 응답특성을 개선하는 최적 이득이 시뮬레이션 및 분석을 통해 결정된다. 최적 이득값을 적용하여 개발된 발전기의 향상된 대역폭 및 안정성이 시뮬레이션과 실험으로 입증되어졌다.

• 신재생에너지
• /
• 제10권2호
• /
• pp.5-11
• /
• 2014

Squirrel cage induction motor is the main driving system of industrial field and familiar with its use in a large variety of applications. The structure and operating characteristics of induction generator is almost identical to induction motor, but the induction generator part is used restrictively from hydropower power and wind power development etc. Recently induction generator is commonly used for micro & small hydro power applications due to its simplicity, reliability, low cost and robustness. Input and output of induction motor has turned against at the induction generator operation. Rotation speed of induction generator is small faster than synchronous speed of induction motor. As output of induction machines increases with the increasement of speed, so loss is same. Actually, generator efficiency is lower than motor at this condition. If induction generator is connected with mechanical load such as increaser, total efficiency is decreased. Consequently the quality in compliance with an induction motor parameter applying like that in the generator is a possibility of having the error of some. In this paper, we analyzed that input, output, torque and efficiency of induction machine is different from each other above and below synchronous speed.

• 전기학회논문지
• /
• 제64권8호
• /
• pp.1212-1216
• /
• 2015

In this paper, we compared the performance of the Right Handed Nonlinear Transmission Line (RH-NLTL) and Left Handed Nonlinear Transmission Line (LH-NLTL) as a harmonic generator. For a performance comparison, we fabricated both a RH-NLTL and a LH-NLTL harmonic generator whose operational bandwidth is from 0.5 GHz to 1.5 GHz. Under the each condition for the RH-NLTL and the LH-NLTL to maximize second harmonic, the output power of the second harmonic was 9.33 dB lower than the input power for the RH-NLTL and 12.67 dB lower than the input power for the LH-NLTL. Under the each condition for the RH-NLTL and the LH-NLTL to maximize third harmonic, the output power of the third harmonic was 13.33 dB lower than the input power for the RH-NLTL and 14.83dB lower than the input power for the LH-NLTL. Also, we have observed that, generatlly, a RH-NLTL is useful in generating various multiple harmonics and a LH-NLTL is useful in generating a specific order of harmonic by adjusting a proper DC vias, input frequency and input power. These tendencies could be a good guideline to use NLTLs as a frequency multiplier.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.255-259
• /
• 2015

We have proposed and experimentally verified a pulse-width modulation (PWM) generator which directly generated a PWM signal in the optical domain. Output waveforms were clear at the repetition rate of 16 MHz; the duty cycle (DC) was from 14.7% to 72.1%; and the DC-control resolution was about 4.399%/dB. The PWM generator' operation principle is based on the injection-locking property of a single-mode Fabry-$P{\acute{e}}rot$ laser diode (SMFP-LD). The SMFP-LD, which has a self-locked mode wavelength at ${\lambda}_{PWM}$, was used to detect the power of the injection-locking signal (optical analog input). If the analog input power is high, the SMFP-LD is locked to the wavelength of the input signal ${\lambda}_a$ and there is no output after an optical bandpass filter (OBF). If the analog input power is low, the SMFP-LD is unlocked and there is output signal at ${\lambda}_{PWM}$ after the OBF. Thus, the SMFP-LD plus the OBF provide digital output for an analog input. The DC of the output PWM signal can be controlled by tuning the power of the analog input.