• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.172-181
• /
• 2022

Objectives: In order to reduce the burden on employers and increase the reliability of measurement results, improvements to the provisions related to the work environment measurement reporting system, such as the current Occupational Safety and Health Act and its Enforcement Rules, are planned. This study aimed to suggest improvements for the work environment measurement reporting system through a survey and Delphi investigation. Method: This survey included workplaces (health managers), national institutions (the Ministry of Employment and Labor) that use the results of the work environment measurement reporting system for policy and supervision purposes, and work environment measurement institutions that enter the results were included. In addition to the survey, we tried to derive results through meetings with stakeholders and expert advisory meetings. Results: It is difficult to abolish or partially improve the reporting system under the Enforcement Regulations of the Occupational Safety and Health Act at this point because the opinions of workplaces, supervisory agencies, and measuring agencies differ in terms of its intended purpose and use. In the case of high-exposure harmful factors (over 50% on the basis of exposure) in the "comprehensive opinion" described in the work environment measurement results table, it is necessary to insert unit of work with exposed harmful factors, exposure factors, and current conditions in checklists or tables so that they can be reflected in government policies. In the case of workplaces that are feared to be highly exposed to substances subject to measurement, it seems desirable to improve them so that industrial health instructors registered with the Korea Safety and Health Agency or local labor offices can provide technical guidance. As an improvement plan to increase the reliability of data and the use of big data, it is necessary to improve the input method for processes and jobs. Conclusion: The laws and regulations of the work environment measurement reporting system are difficult to revise due to a lack of consensus among current stakeholders, but improvements can be achieved by improving the Ministry of Employment and Labor's notifications and other means. In addition, in order to effectively utilize the data from the K2B system, it is necessary to improve the input method for processes and jobs.

• 전력전자학회논문지
• /
• 제5권5호
• /
• pp.419-426
• /
• 2000

일반적으로 아크용접기의 정류기로 다이오드정류기가 사용되고 있다. 이것의 문제점은 높은 고조파전류가 발생된다는 것이고 아울러 전원측의 오염문제를 야기한다. 본 논문에서는 PWM 컨버터를 사용함으로써 아크용접기의 입력특성이 개선됨을 보인다. 회로구조상 다이오드 정류기와 PWM컨버터로 대체되고 부하단에 안정적인 전력을 공급하기 위하여 직류단전압이 PI제어기에 의해 제어된다. PI 제어기가 직류단 전압제어를 위해 사용되는 경우 예측불가능한 용접부하의 특성상 높은 전압맥동성분이 발생된다. 따라서 본 논문에서는 전압제어기의 속응성을 개선하기 위하여 전향보상기가 도입되었고 이의 분석을 통하여 전압제어기의 외란으로 간주되는 부하전류의 변동이 전압의 맥동성분에 영향을 줄이는 이론적 예측을 시뮬레이션과 실험을 통해 검증한다.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.59-64
• /
• 2018

In general, tracked combat vehicles require excellent output performance of a power unit system to drive on special terrains and in extreme environmental conditions. However, high temperature and pressure are readily applied to the coolant hose in the power unit of the vehicles during high-speed driving under extreme road and weather conditions. These driving conditions can cause the separation phenomenon of the coolant hose in the power unit and consequentially engine overheating during driving. Therefore, a newly designed decompression device for the coolant hose has been proposed and manufactured to solve these problems in the present study. To validate of the newly proposed decompression device, the input and output pressures were measured under the before- and after-improvement conditions using experimental methods for different engine RPMs. In addition, the pre-heater temperature was measured under both conditions. From the experimental results, we expect that the current investigation can help to improve the driving performance of tracked combat vehicles.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.206-211
• /
• 2021

본 논문에서는 열전에너지 하베스팅을 위한 자가 리셋(self-reset) 기능을 갖는 영점 전류 스위칭(Zero-Current Switching) 회로를 제안한다. 본 논문에서 제안하는 영점 전류 스위칭 회로는 전압비교기 회로에 자가 리셋 기능을 추가하여 전압비교기의 동작전류를 최소화함으로써 에너지 하베스팅 회로의 전력 소비를 줄이고 에너지 변환 효율을 향상시킬 수 있게 한다. 회로 시뮬레이션으로 본 논문에서 제안하는 영전 전류 스위칭 회로의 동작을 검증하고 성능을 평가한 결과, 열전에너지 하베스팅 회로의 출력전압-입력전압 비가 5.5 일 때, 기존의 영점 전류 스위칭 회로를 이용한 하베스팅 회로와의 비교를 통해서 본 논문의 하베스팅 회로의 전력효율이 3.4% 개선되는 것으로 평가된다. 본 논문에서 제안하는 영점 전류 스위칭 회로는 열전에너지 하베스팅의 응용 중에서 특히 저전력과 고에너지 효율 특성이 중요한 웨어러블, 바이오 헬스 관련된 하베스팅 회로의 성능 개선에 기여할 수 있을 것으로 생각된다.

• 전력전자학회논문지
• /
• 제6권6호
• /
• pp.506-513
• /
• 2001

SRM의 토크는 상전류와 인덕턱스의 기울기에 따라 달라진다. 그러나 자기회로의 포화로 인하여 원하는 토크를 제어하기 어렵다. 원하는 토크를 발생시키기 위해 SRM 드라이브는 스위치-온각, 스위치-오프각 그리고 인가 접압에 의해 제어된다. 스위치-온, 오프 각 에의해 원하는 전류와 토크를 제어할수있다. 본 논문은 스위치 온, 오프각을 제어하는 최적제어방식을 제안하였다. 스위치 오프 각은 시뮬레이션과 실험을 통하여 효율을 기준으로 결정하였으며, 스위치 온각은 부하에 의해 결정되었다. 도통각은 토크제어와 속도제어를 위해 GA-신경회로망을 이용하여 제어하였다.

• 한국산업융합학회 논문집
• /
• 제24권4_1호
• /
• pp.377-385
• /
• 2021

High voltage direct current(HVDC) systems has been an alternative method of a power transmission to replace high voltage alternate current(HVAC), which is a traditional AC transmission method. Due to technical limitations, Line commutate converter HVDC(LCC-HVDC) was mainly used. However, result from many structural problems of LCC-HVDC, the voltage source converter HVDC(VSC-HVDC) are studied and applied recently. In this paper, after analyzing the reactive power and output voltage ripple, which are the main problems of LCC-HVDC, the characteristics of each HVDC are summarized. Based on this result, a new LCC-HVDC structure is proposed by combining LCC-HVDC with the MMC structure, which is a representative VSC-HVDC topology. The proposed structure generates lower reactive power than the conventional method, and greatly reduces the 12th harmonic, a major component of output voltage ripple. In addition, it can be easily applied to the already installed LCC-HVDC. When the proposed method is applied, the control of the reactive power compensator becomes unnecessary, and there is an advantage that the cut-off frequency of the output DC filter can be designed smaller. The validity of the proposed LCC-HVDC is verified through simulation and experiments.

• ETRI Journal
• /
• 제31권5호
• /
• pp.598-600
• /
• 2009

A highly efficient and compactly integrated balanced power amplifier (PA) for W-CDMA handset applications is presented. To overcome the size limit of a typical balanced PA, a bulky input divider is integrated into a PA MMIC, and a complex output network is replaced with simple lumped-element networks. For efficiency improvement at the low output power level, one of the two amplifiers in parallel is deactivated and the other is partially operated with corresponding load impedance optimization. The implemented PA shows excellent average current consumption of 34.5 mA in urban and 56.3 mA in suburban environments, while exhibiting very good load-insensitivity under condition of VSWR=4:1.

• 한국정밀공학회지
• /
• 제7권3호
• /
• pp.83-93
• /
• 1990

The characteristics of servo systems are desired to be independent for any unpredicted operational condition. The relation between input current and output flowrate of the servovalve is dependent on the load pressure and the idea of compensation using the load pressure feedback is fundamental theory in this paper. With this idea, this paper researches the performance improvement of hydraulic position control system. Static characteristics of compensated system is analyzed by means of analog computer simulation, digital computer simulation and experiment for nonlinear model and linearized model, respectively.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.809-821
• /
• 2009

This paper proposes a new phase-shift full-bridge DC-DC converter by applying energy recovery circuits to a conventional full-bridge DC-DC converter in plasma display panel applications. The converter can achieve soft-switching in main-switches by an extra auxiliary resonant network even with the wide operating condition of both output load and input voltage. The un-coupled design guidelines to the main bridge-leg component parameters for soft-switching operation contribute to conduction loss reduction in the transformer primary side leading to efficiency improvement. The auxiliary switches in the resonant network also operate in zero-current switching. This paper analyzes the operation modes of the proposed scheme and presents the key design guidelines through steady state analysis. Also, the paper verifies the validity of the circuits by hardware experiments with a 1kW DC/DC converter prototype.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.3-5
• /
• 2005

The objective of this research was to develop a framework of the Soil Environment Information Management System (SEIMS). In this study, we found that the SEIMS needs to be consisted of three sub-systems (i.e., information input system, DB system, and opening to the public system), which is operated on the Web-GIS basis. Also, we suggested structure and detailed items for each sub-system which are acceptable under the basis of current legal and institutional system. Furthermore, we made several suggestions for future-oriented system. Further researches need to be pursued for developing efficiently the SEIMS, such as 1) DB standards for the SEIMS, 2) guidelines for each cleanup phase, 3) improvement of the SEIMS for groundwater quality, and 4) integrated SEIMS for both soil and groundwater system.