• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.853-856
• /
• 2006

It is known that cement production not only consumes large amount of energy but also contributes substantially to the green house gas emission. Therefore, there is a demand to develope a new technology to produce energy efficient and environmental conscious cements. The most recent, wood wool ceramic board is being applied in various building material field, for example thermal insulating and acoustic absorption material. This paper focused on improvement of the physical properties for wood wool ceramic board applied inorganic polymer binder. As the result of this experiment, what we could obtain better wood wool ceramic board's properties such as density, water contests, water resistance and band strength, was 0.46, $10{\sim}12%$, 1.9% and $40kgf/cm^2$. This result can be applicable to commercial wood wool ceramic board.

• 한국분말재료학회지
• /
• 제5권3호
• /
• pp.199-209
• /
• 1998

A new low melting inorganic binder, monoclinic $HBO_2$, has been developed for Selective Laser Sintering (SLS) of alumina powder by dehydration process of boron oxide powder in a vacuum oven at $120^{\circ}C$. It led to better green SLS parts and higher bend strength far green and fired parts compared to other inorganic binders such as aluminum and ammmonium phosphate. This appeared to be due to its low viscosity and better wettability of the alumina particle surface. A low density single phase ceramic, aluminum borate ($Al_{18}B_4O_{33}$), and multiphase ceramic composites, $A_{12}O_3-A_{14}B_2O_9$, were successfully developed by laser processing of alumina-monoclinic $HBO_2$ powder blends followed by post-thermal processing; both $Al_{18}B_4O_{33}$ and $A_{14}B_2O_9$ have whisker-like grains. The physical and mechanical properties of these SLS-processed ceramic parts were correlated to the materials and processing parameters. Further densification of the $A_{12}O_3-A_{14}B_2O_9$ ceramic composites was carried out by infiltration of colloidal silica, and chromic acid into these porous SLS parts followed by heat-treatment at high temperature ($1600^{\circ}C$). The densities obtained after infiltration and subsequent firing were between 75 and 80% of the theoretical densities. The bend strengths are between 15 and 33 MPa.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.321-322
• /
• 2013

Recently, the exhaustion of resource and environmental damage is serious due to the global warming because of the CO₂ exhaust and each type the natural aggregate picking described below. meanwhile, The rest is the actual condition gone to the dumping ground that there is nearly no use which the waste glass can recycle and it is recycled. This research applied the waste glass as the cement substitute material the inorganic binder and coares aggregate substitute material. It utilizes the substitute material of the cement according to it and natural aggregate and tries to develop the environment-friendly artificial stone. The inorganic binder used the blast furnace slag, red mud, and fly ash. The straight type steel fiber, PVA fiber, PA fiber, and cellulosic fiber were used with a kind of fiber. As to the experimental item according to it, the compressive strength is the flexural strength and compressive strength.

• 한국건설순환자원학회지
• /
• 제8권2호
• /
• pp.30-34
• /
• 2013

• 한국산학기술학회논문지
• /
• 제6권5호
• /
• pp.418-422
• /
• 2005

본 연구에서 광촉매 $TiO_{2}$/P-25를 알루미늄 금속판에 코팅하여 코팅 조건에 따른 IPA 분해 활성을 고찰한 결과, 무기계 바인더인 KR-400, 유$\cdot$무기복합 바인더인 TMOS, 유기계 바인더인 A-9540을 사용하여 코팅한 알루미늄 금속판의 표면상은 모두 깨끗하였다. 부착력은 무기계 바인더를 제외한 바인더에서 우수한 것으로 나왔다. 또한 IPA 분해 효율은 무기계 바인더 < 유$\cdot$무기 복합 바인더 < 유기계 바인더 순으로 나타났다. 유$\cdot$무기복합 바인더와 P-25의 비율을 10: 10, 8.3: 10, 6.6: 10, 5: 10, 3.3: 10, 1.6: 10으로 바꾸어 광분해 실험을 수행한 결과, 1.6:10일 때 IPA 분해 효율이 가장 우수하였다. 상용화된 타사(A사, B사) 제품과의 성능 비교 결과, 본 연구에서 사용한 바인더(A-9540): P-25의 비율을 1: 6으로 배합하여 코팅한 알루미늄 판의 IPA분해 효율이 가장 우수하였다.

• 센서학회지
• /
• 제32권3호
• /
• pp.140-146
• /
• 2023

Water quality is crucial for human health and the environment. Accurate measurement of the quantity of organic carbon in water is essential for water quality evaluation, identification of water pollution sources, and appropriate implementation of water treatment measures. Total organic carbon (TOC) analysis is an important tool for this purpose. Although other methods, such as chemical oxygen demand (COD) and biochemical oxygen demand (BOD) are also used to measure organic carbon in water, they have limitations that make TOC analysis a more favorable option in certain situations. For example, COD requires the use of toxic chemicals, and BOD is time-consuming and can produce inconsistent and unreliable results. In contrast, TOC analysis is rapid and reliable, providing accurate measurements of organic carbon content in water. However, common methods for TOC analysis can be complex and energy-intensive because of the use of high-temperature heaters for liquid-to-gas phase transitions and the use of acid, which present safety risks. This study focuses on a TOC analysis method using TiO₂ photocatalysis, which has several advantages over conventional TOC analysis methods, including its low cost and easy maintenance. For TiO₂, rutile and anatase powders are mixed with an inorganic binder and spray-coated onto a glass fiber substrate. The TiO₂ powder and inorganic binder solutions are adjusted to optimize the photocatalytic reaction performance. The TiO₂ photocatalysis method is a simple and low-power approach to TOC analysis, making it a promising alternative to commonly used TOC analysis methods. This study aims to contribute to the development of more efficient and cost-effective approaches for water quality analysis and management by exploring the effectiveness and reliability of the developed equipment.

• 보존과학회지
• /
• 제36권5호
• /
• pp.339-350
• /
• 2020

본 연구는 석조문화재 보존처리용(표면마감) 무기질바인더가 암석에 위해한 영향을 미치는 백화현상을 제어하기 위해 광물기반의 충전제와 발수제를 혼합한 하이브리드 기술을 적용하였다. 연구결과, 무기질바인더 성능개선에 효과적인 충전제(실리카흄 3.4%)와 발수제(실란-실록산 1%)를 선정하였으며, 해당 중량비율은 백화물질 제어에 효과가 있는 것으로 판단된다. 또한 압축강도 기준을(20 MPa) 상회하였고 흡수율은 낮아 투수저항성이 높은 것을 확인하였다. 이온용출 결과도 백화현상에 직·간접적으로 작용하는 이온의 검출량이 대조군보다 작게 검출되어 상대적으로 안정적인 것으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.431-437
• /
• 2019

본 연구는 유기계 기재에 무기계 바인더 소재를 함침시킴으로써 유기계 수준의 경제성을 가지며 우수한 단열성능 및 화재 안전성을 보유한 유무기 융합형 단열재 개발을 목적으로 한다. 유기계 기재는 폴리우레탄 소재의 상용 스펀지를 사용하였고, 함침용 무기 바인더 용액은 재활용 석고 부산물에 물과 첨가제를 혼합하여 제조하였다. 개발 소재의 성능평가 결과 열전도율 0.051W/mK 이하의 우수한 단열성능 뿐만 아니라 국토교통부 고시 제 2015-744호 기준에 명시된 준불연 재료임을 확인할 수 있었다. 또한 본 개발 소재는 제조 공정 과정에서 밀도 제어에 따른 열전도율 및 난연성 조절이 가능하여 다양한 용도의 단열재에 적용 가능할 것으로 판단된다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.373-378
• /
• 2002

Metal matrix composites have a great interest in recent years because high specific strength, high specific stiffness characteristics, and application ranges of the composites are extend to variety industry. In this paper, an investigation was performed on the plane strain fracture toughness and slinding wear properties of AC4CH alloy(Al-Si-Mg line) reinforced with 20wt% aluminum borate whisker expect one, which contained a inorganic binder($TiO_2$). the binder led to the formation of strengthen the whisker each other. The test of fracture toughness was using CT(half size) specimen of thickness 12.5mm, width 25mm. and test of slinding wear of using tribo a pin-on-disk machine and lubricant is used without paraffine 8.2CST at room temperature. As results, Fracture toughness $K_{IC}$ is $8.7MPa-m^{05}$ for ABOw/AC4CH, $9.28MPa-m^{05}$ for ABOw/AC4CH added $TiO_2$. but AC4CH alloy was violated the critical stipulated by ASTM standard for valid measurement of $K_{IC}$. In case of, it was performed $J_{IC}$ test instead of $K_{IC}$ based on ASTM E 1820.

• 한국건축시공학회지
• /
• 제18권2호
• /
• pp.185-193
• /
• 2018

In this study, using Granulated Blast Furnace Slag (GBFS), an industrial byproduct, and Phosphogypsum (PG), and Waste Lime (WL) as activator, non-sintering binder (NSB) which does not require a sintering process was produced, and the chemical penetration resistance was evaluated through a seawater resistance experiment. The result of the experiment showed that the inside of NSB mortar saw almost no influence from the ions in seawater due to its dense structure. Also, as it appears that only the surface reacts with ions in seawater while spreading inward is suppressed, the high seawater resistance of NSB could be confirmed.