• Environmental Analysis Health and Toxicology
• /
• v.19 no.2
• /
• pp.141-151
• /
• 2004

We exposed juvenile puffer fish, Takifugu obscurus(30 days after hatching) to various aqueous pollutants including 4 kinds of inorganic metals (Ag, Cd, Cu and Hg), 2 organotin compound.; (tributyltin ［TBT］ and triphenyltin［TPhT］) and 5 polycyclic aromatic hydrocarbon (PAH) compounds (chrysene, fluoranthene, naphthalene, phenanthrene and pyrene) to estimate median lethal concentrations (LC50s) of each pollutant after the 96-hour acute exposure. Among the inorganic metals, Hg (52 $\mu\textrm{g}$/L; 96-h LC50) was most toxic to test animals and followed by Ag (164 $\mu\textrm{g}$/L), Cu (440 $\mu\textrm{g}$/L) and Cd (1180 $\mu\textrm{g}$/L). Aqueous TBT was more toxic between the two organotins; the 96-h LC50 for TBT (5.1 $\mu\textrm{g}$/L) was 3 times lower than that of TPhT (17.3 $\mu\textrm{g}$/L). The acute toxicity of PAH compounds was highest for chrysene (1.5 $\mu\textrm{g}$/L; 96-h LC50) and decreased in the order of pyrene (65 $\mu\textrm{g}$/L) > fluoranthene (158 $\mu\textrm{g}$/L) > phenanthrene (432 $\mu\textrm{g}$/L) > naphthalene (8690 $\mu\textrm{g}$/L). The toxicity of PAH compounds wat closely related to their physico-chemical characteristics such as $K_{ow}$ and water solubility, and well explained by simple QSAR relationship. The sensitivity of puffer fish to various inorganic and organic pollutants was generally comparable to various fish species widely used as standard test species in previous studies and further evaluation should be conducted to develop adequate testing procedure for T. obscurus when used in various toxicity tests.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.12-15
• /
• 1986

Lead tolerance of $Pt/Al_2O_3$ catalysts was evaluated for CO oxidation depending on the properties of the alumina supports and base metals added as promoter. Among the four different alumina supports, the support with a large macropore volume (0.45 cc/g) and 5% Ce has shown the best resistence to lead poisoning. Most of the base metals added to the Pt-catalysts were found to be ineffective for improving lead resistence, but boron has shown an excellent lead tolerence, although it decreases the initial catalytic activity.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.50-58
• /
• 1999

This study was carried out to investigate the growth characteristics and propagation methods of L. obtusiloba as a woody landscape plant. The results are obtained as follows: L. obtusiloba was dioecious shrub and shaped with bush type. Leaves were ovate, obtuse, cordate, 7.05 cm long, 7.20 cm wide, and petiole 2.0 cm long. Flowers of L. obtusiloba were diclinous. Soil acidity ranged from pH 4.06 to 5.53 with the lowest at the Mt. Soo-Ri. Mt. Soo-Ri located near factory district, which was considered to damaged by environmental deteoration. While soil organic matter was highest at Mt. Soo-Ri, inorganic nutrients were low. L. obtusiloba grows in the area with low soil acidity and low content of inorganic. Therefore it seemed to be tolerant to air pollution. L. Obtusiloba was high seed germination rate in the plug box and its shoots were longer than seeding box and softwood cutting of L. obtusiloba showed the rooting rate of 50% at 5,000ppm on June 23. To develop a mass propagation method of Korean native L. obtusiloba through an axillary bud culture as a woody landscape plant, about 2∼3 cm shoots induced from explant were subcultured to new media contained different growth regulators. Shoots multiplied most effectively on a WPM containing 1.0 mg/l BA, producing 5.5 shoots with a shoot length of 2.5 cm per shoot explant.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.6
• /
• pp.406-411
• /
• 1997

Transparent conductive thin films have found many applications in active and passive electronic and opto-electronic devices such as flat panel display electrode, solar cell electrode and window heat mirror, etc. Low resistivity and high transmittance of these films can beotained by controlling deposition parameters which are oxygen partial pressure, substrate temperature and dopant concentration. In this study, non-stoichiometric and Sb-doped thin electrical properties of undoped films have been degraded with increase of substrate temperature and optical properties have been improved in Sb-doped films. The resistivity of $2.5\times10^{-3}\Omega\textrm{cm}$,/TEX>, average transmittance of 80% and sheet resistance of 130$\Omega$/$\square$ at thickess of 2000 $\AA$ could be obrained at optmal condimal conditions which were at $400^{\circ}C$ of substrate temperature, 58% of oxygen partial pressure and 5% of Sb doping concentration.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.20-26
• /
• 2010

Water soluble organic and inorganic species are important components in atmospheric aerosol particles and may act as cloud condensation nuclei to indirectly affect the climate. To characterize organic and elemental carbon(OC and EC), water-soluble organic carbon(WSOC) and inorganic ionic species contents, daily $PM_{2.5}$ measurements were made during the wintertime at an urban site of Gwangju. Average concentrations of WSOC, $NO_3^-$, $SO_4^{2-}$ and $NH_4^+$, which are major components in the water-soluble fraction in PM2.5, are 2.11, 5.73, 3.51 and $3.31{\mu}g/m^3$, respectively, representing 12.0(2.9~23.9%), 21.0(12.9~37.6%), 11.6(2.5~25.9%) and 11.7%(3.8~18.6%) of the $PM_{2.5}$, respectively. Abundance of water soluble organic compounds ranged from 5.4 to 35.9% of total water soluble organic and inorganic components with a mean of 17.6%. Even though the sampling was performed during the winter, the average contributions of secondary OC and WSOC, as deduced from primary OC/EC(or WSOC/EC) ratio, were relatively high, accounting for 17.9%(0~44.4%) of the total OC and 11.2%(0.0~51.4%) of the total WSOC, respectively. During the sampling period, low $SO_4^{2-}/(SO_4^{2-}+SO_2$) ratio of 0.14(0.03~0.32) and relative humidity condition in the winter time suggest an possibility of impact of long-range transport and/or aqueous transformation processes such as metal catalyzed oxidation of sulfur, in-cloud processes, etc.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.47-54
• /
• 2020

To develop the bright-vivid red- and yellow-inorganic fluorescent pigments with high luminescence properties, A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments were synthesized by a water assisted solid state reaction (WASSR) method and a conventional solid state reaction method. Although impurity peaks corresponding to the AVO₃ and AV₃O₈ (A = K, Rb, and Cs) were observed in all samples prepared, the trigonal structure A₃V₅O₁₄ (A = K and Rb) and orthorhombic structure Cs₂V₄O₁₁ were successfully obtained as a main phase. These inorganic pigments showed the broad absorption band (under 550 nm) originated from CT transitions of VO₄ polyhedron, and the strong broad red- and green-emission bands due to ³T₂ → ¹A₁ and ³T₁ → ¹A₁ transitions of the [VO₄]^3- group. The A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ pigments showed a bright-vivid red- and yellow-body color, where the a* values of the A₃V₅O₁₄ (A = K and Rb) were +35.5 and +45.9, respectively, and b* value of Cs₂V₄O₁₁ pigments was +50.3. The L* values of the A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments were over +45. These results indicate that the A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments could be an attractive candidate as a bright-vivid red- and yellow inorganic pigments.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.417-421
• /
• 2006

In this study, colloidal Ag solution was spouted on the surface of the inorganic pigment using the hybridizer system and the spray nozzle. Then, the surface of the inorganic pigment was modified by titanium dioxide in order to possess antibacterial ability. Nano-sized colloidal Ag was made by using a seed sol method in this study. It was confirmed that the size of particle per unit weight becomes enlarged, as the addition of $AgNO_{3}$ increased, and as the time of reaction increased, in the manufacturing process of nano-sized colloidal Ag. The antibacterial measurement of the inorganic pigment showed that the growth of fungus was reduced as the reaction time increased. It was measured that the antibacterial activity was excellent at fixed time frame, after the antibacterial ability appeared in $5{\sim}7$ hours of the antibacterial inoculation experiment. The experiment of titanium dioxide's Photocatalyst effect showed $60{\sim}70%$ efficiency in about 80 minute reaction time of the dissolution results regarding measurements of benzene. It was shown that more than 90% of the dissolution efficiency was achieved in the reaction time of about 30 minute.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1027-1034
• /
• 2010

Effects of inorganic nano-powders on the polymerization and thermal degradation kinetics as well as the mechanical properties of polyurethane nano-composites were studied by both the measurement of polymerization temperature as a function of time and non-isothermal thermogravimetric analysis (TGA) as well as the Instron test. As the results from polymerization studies, the reaction rates of MMT-filled PU composites were faster than those of Ce500-filled ones, and moreover, the activation energies using Kissinger method for the thermal degradation of composites were calculated as 139.34 kJ/mol for the Ce500-filled PU composites and 91.12 kJ/mol for MMT-filled one, respectivel, exhibiting that MMT nano-powder seemed to be acting as the catalyst for both polymerization and degradation of PU composites. UTM result, however, showed that tensile strength at break of MMT-filled composites was much higher than that of Ce500-filled ones above the concentrations range of 5 phr in the composites.

• Journal of the Korean Ceramic Society
• /
• v.28 no.9
• /
• pp.667-674
• /
• 1991

In this study, Kaolin was carbonized at 1300~175$0^{\circ}C$ and its constituent mineral change was investigated. Carbonized kaolin at 1$650^{\circ}C$ was mixed with metallic silicon, formed and nitrified at 135$0^{\circ}C$ in N2-NH3 atmosphere. Properties of this product such as porosity, bulk density, MOR, nitrization rate and oxidation resistence were measured, and its mineralogical changes were investigated by XRD. The results were as follows; 1) $\beta$-SiC was initially synthesized at 150$0^{\circ}C$, and its amount was continuously increased with reaction temperature to 1$700^{\circ}C$. 2) At 1$600^{\circ}C$, mullite was rapidly decomposed and the amounts of $\beta$-SiC and $\alpha$-Al2O3 were increased simultaneously. 3) By adding alkali to kaolin, the decomposition temperature of mullite was dropped approximately 10$0^{\circ}C$, but the amount of $\alpha$-SiC was increased. 4) The highest values of their nitrization rate and MOR were obtained at the specimen of 35 wt% metallic silicon in nitrization reaction. 5) It seems that increment of $\alpha$-Si3N4 and $\alpha$-Al2O3 phase during nitrization was due to the decomposition of Al4SiC4 existed in carbonized kaolin. 6) Si3N4 bonded SiC-Al2O3 composite were fabricated from kaolin at relatively low temperature (135$0^{\circ}C$).

• Journal of the Korean Ceramic Society
• /
• v.29 no.7
• /
• pp.511-516
• /
• 1992

In this study, SiC powder and Si powder were used as the raw materials. Mixture was prepared with addition of Al2O3 and Fe2O3 at 0.1~0.5wt% respectively. After this step, the mixture was pressed and nitrided for 30 hrs at 140$0^{\circ}C$ under NH3-N2 atmosphere. Mechanical properties of sintered specimens were investigated from measurement of porosity, bulk density and three point bending test. nitration reaction extent was observed at the change of mass before and after reaction, and the microstructure and the change of $\alpha$-Si3N4 and $\beta$-Si3N4 were observed by XRD and SEM. In the current work, the results are as follows 1. When Fe2O3 added, the nitridation increased with the content of Fe2O3, and the bending strength was increased from 0.1 wt% to 0.3 wt%, and decreased to 0.5 wt%. 2. When Al2O3 added, the nitridation and the bending strength increased little by little with the content of Al2O3 3. The bending strength of the specimen added with Fe2O3 were higher than that with Al2O3. Because the specimens contained Fe2O3 had much more the whisker type crystal of Si3N4 contributing to strength than contained Al2O3.