• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1280-1286
• /
• 2006

Three different virgin activated carbons made of each coal(Calgon), coconut(Samchully) and wood(Picabiol) based activated carbon(AC) were tested for an adsorption performance of 1,4-dioxane in a continuous adsorption column. Breakthrough behavior was Investigated that the breakthrough points of coal, coconut and wood based AC were observed as 3600 bed volumn(BV), 1440 BV and 144 BV respectively. Adsorption capacity(X/M) of coal, coconut and wood based AC was observed. The reported results of adsorption capacity showed that coal based AC was highest(578.9 ${\mu}g/g$), coconut based AC was intermediate(142.3 ${\mu}g/g$) and wood based AC was lowest(7.4 ${\mu}g/g$) due to increasing specific surface area. Moreover, carbon usage rates(CURs) for coal, coconut and wood based AC had been shown as 0.48 g/day, 1.41 g/day and 6.9 g/day respectively. The constant characteristic of the system, k of coal based AC was found to be 91.5 and k of coconut based AC was found to be 17.9. Removal efficiencies of 1,4-dioxane with different ozonation dosages(2 and 5 mg/L) for 20 min ozonation had been shown 38% and 87% respectively. There was no observation for biological removal of 1.4-dioxane by attached micro-organisms when used(3.1 years and over 5 years) biological activated carbon(BAC) without pretreatment of oxidation were employed. When a combination of ozonation(2 mg/L and 5 mg/L) and BAC process for $10{\sim}30$ min was applied, removal efficiency for 1,4-dioxine increased only $2{\sim}6%$ compared to only applying ozonation. Therefore removal efficiency of BAC process prior to using oxidation was proven to negligible. Consequently, the results presented in this paper provide a better insight into the adsorption performance of 1,4-dioxane. This observation suggests that using virgin activated carbon made of coal is the best selection for removal of 1,4-dioxane in the water treatment for an advanced treatment. It is clear from this research that longer EBCT for ozonation or higher ozone concentration are more effective operation methods for removal of 1,4-dioxane than longer EBCT in the BAC process.

• Asia pacific journal of information systems
• /
• v.19 no.3
• /
• pp.125-150
• /
• 2009

RFID(Radio Frequency IDentification) is a wireless frequency of recognition technology that can be used to recognize, trace, and identify people, things, and animals using radio frequency(RF). RFID will bring about many changes in manufacturing and distributions, among other areas. In accordance with the increasing importance of RFID techniques, great advancement has been made in RFID studies. Initially, the RFID research started as a research literature or case study. Recently, empirical research has floated on the surface for announcement. But most of the existing researches on RFID adoption have been restricted to a dichotomous measure of 'adoption vs. non-adoption' or adoption intention. In short, RFID research is still at an initial stage, mainly focusing on the research of the RFID performance, integration, and its usage has been considered dismissive. The purpose of this study is to investigate which factors are important for the RFID adoption and implementation with organizational resources. In this study, the organizational resources are classified into either finance resources or IT knowledge resources. A research model and four hypotheses are set up to identify the relationships among these variables based on the investigations of such theories as technological innovations, adoption stage, and organizational resources. In order to conduct this study, a survey was carried out from September 27, 2008 until October 23, 2008. The questionnaire was completed by 143 managers and workers from physical distribution and manufacturing companies related to the RFID in South Korea. 37 out of 180 surveys, which turned out unfit for the study, were discarded and the remaining 143(adoption stage 89, implementation stage 54) were used for the empirical study. The statistics were analyzed using Excel 2003 and SPSS 12.0. The results of the analysis are as follows. First, the adoption stage shows that perceived benefits, standardization, perceived cost savings, environmental uncertainty, and pressures from rival firms have significant effects on the intent of the RFID adoption. Further, the implementation stage shows that perceived benefits, standardization, environmental uncertainty, pressures from rival firms, inter-organizational cooperation, and inter-organizational trust have significant effects on the extent of the RFID use. In contrast, inter-organizational cooperation and inter-organizational trust did not show much impact on the intent of RFID adoption while perceived cost savings did not significantly affect the extent of RFID use. Second, in the adoption stage, financial issues had adverse effect on both inter-organizational cooperation and the intent against the RFID adoption. IT knowledge resources also had a deterring effect on both perceived cost savings and the extent of the RFID adoption. Third, in the implementation stage, finance resources had a moderate effect on environmental uncertainty and extent of RFID use while IT knowledge resources had also a moderate effect on perceived cost savings and the extent of the RFID use. Limitations and future research issues can be summarized as follows. First, it is difficult to say that the sample is large enough to be representative of the population. Second, because the sample of this study was conducted among manufacturers only, it may be limited in analyzing fully the effect on the industry as a whole. Third, in consideration of the fact that the organizational resources in the RFID study require a great deal of researches, this research may deem insufficient to fulfill the purpose that it initially set out to achieve. Future studies using performance research are, therefore, needed to help better understand the organizational level of the RFID adoption and implementation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.1-16
• /
• 2023

Due to imbalances in supply and demand within the labor market, start-ups have emerged as crucial players in the generation of high-quality employment opportunities, particularly in stagnant job markets. In response to this trend, governments are allocating substantial financial and human resources to initiatives that support start-up development. This has led to an increasing rate of engagement in start-up ventures across diverse age groups, not limited to younger individuals. Start-ups are enterprises focused on the commercialization of innovative ideas with the aim of achieving profitability in the marketplace. Research concerning the successful market integration of new products and the attainment of sustainable growth is pivotal. Such research is instrumental not only for the success of start-ups but also for realizing the broader social functions and contributions that these enterprises can offer. Previous research has often examined new product market-entry strategies, often referred to as new product marketing, particularly for large companies and SMEs. However, there is a gap in studies focusing on prototype marketing strategies specific to start-ups. Thus, this study aims to examine the impact of Pre-announcing marketing strategies on the market attention garnered by start-ups with low recognition and limited infrastructure, and how such attention contributes to their sustainable growth. Specifically, the study aims to uncover the causal relationship between information attributes like relevance, vividness, and novelty in building customer relationships, and their impact on purchase intentions influenced by performance expectations and hedonic motivations. In terms of Pre-announcing information attributes, relevance, vividness, and novelty positively influence performance expectations and hedonic motivations as outlined in the extended Unified Theory of Acceptance and Use of Technology (UTAUT2). These factors, in turn, positively impact the purchase intention for pre-announced new products from start-ups. These findings are expected to provide both theory and practical insights into the factors influencing market entry through the use of Pre-announcing marketing strategies for start-up new products.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.3
• /
• pp.139-153
• /
• 2024

The importance of sustainable growth and cost reduction has increased globally, leading to the expansion of outsourcing by companies. Additionally, the spread of the platform economy has brought changes in the way we work, and the online outsourcing market, where tasks are mediated through platforms, is growing. Academically, while research on general outsourcing is actively conducted, studies on online outsourcing are relatively insufficient compared to its actual utilization. This study aims to analyze the factors and performance factors of online outsourcing utilization by startups, to identify the effects and concerns of using online outsourcing from multiple perspectives, and to suggest the roles of various stakeholders for effective utilization and industry development. For the research, a survey was conducted with 281 employees of startups who have experience in using online outsourcing, and the main findings are as follows. First, the enhancement of efficiency, profitability, and innovation through the use of online outsourcing positively affects organizational commitment and job satisfaction of startup members. Especially, the improvement of efficiency due to the use of online outsourcing has a significant effect on enhancing job satisfaction. Second, concerns about the burden of online outsourcing fees or uncertain outcomes negatively affect organizational commitment and job satisfaction. Third, there are perceptual differences in the motivations and performance regarding the utilization of online outsourcing depending on the job position. Practitioners perceive that the use of online outsourcing increases organizational commitment, whereas managers have relatively higher concerns about the uncertainty of outsourced task outcomes and information security. Through this study, the possibility that human resource shortages and employee management issues in startups can be improved through online outsourcing was confirmed. By verifying the influence of various factors of online outsourcing utilization, this study also provides meaningful implications for establishing business strategies for online outsourcing intermediary platform companies and for formulating startup support policies by government and other startup support organizations.

• Journal of Korean Home Economics Education Association
• /
• v.24 no.2
• /
• pp.117-134
• /
• 2012

The purpose of this study was to identify the stage of concern, the level of use, and the innovation configuration of Home Economics teachers regarding creativity and personality education in Home Economics(HE) classes. The survey questionnaires were sent through mails and e-mails to middle-school HE teachers in the whole country selected by systematic sampling and convenience sampling. Questionnaires of the stages of concern and the levels of use developed by Hall(1987) were used in this study. 187 data were used for the final analysis by using SPSS/window(12.0) program. The results of the study were as following: First, for the stage of concerns of HE teachers on creativity and personality education, the information stage of concerns(85.51) was the one with the highest response rate and the next high in the following order: the management stage of concerns(81.88), the awareness stage of concerns(82.15), the refocusing stage of concerns(68.80), the collaboration stage of concerns(61.97), and the consequence stage of concerns(59.76). Second, the levels of use of HE teachers on creativity and personality education was highest with the mechanical levels(level 3; 21.4%) and the next high in the following order: the orientation levels of use(level 1; 20.9%), the refinement levels(level 5; 17.1%), the non-use levels(level 0; 15.0%), the preparation levels(level 2; 10.2%), the integration levels(level 6; 5.9%), the renewal levels(level 7; 4.8%), the routine levels(level 4; 4.8%). Third, for the innovation configuration of HE teachers on creativity and personality education, more than half of the HE teachers(56.1%) mainly focused on personality education in their HE classes; 31.0% of the HE teachers performed both creativity and personality education; a small number of teachers(6.4%) focused on creativity education; the same number of teachers(6.4%) responded that they do not focus on neither of the two. Examining the level and type of performance HE teachers applied, the average score on the performance of creativity and personality education was 3.76 out of 5.00 and the mean of creativity component was 3.59 and of personality component was 3.94, higher than standard. For the creativity education, openness/sensitivity(3.97) education was performed most and the next most in the following order: problem-solving skill(3.79), curiosity/interest(3.73), critical thinking(3.63), problem-finding skill(3.61), originality(3.57), analogy(3.47), fluency/adaptability(3.46), precision(3.46), imagination(3.37), and focus/sympathy(3.37). For the personality education, the following components were performed in order from most to least: power of execution(4.07), cooperation/consideration/just(4.06), self-management skill(4.04), civic consciousness(4.04), career development ability(4.03), environment adaptability(3.95), responsibility/ownership(3.94), decision making(3.89), trust/honesty/promise(3.88), autonomy(3.86), and global competency(3.55). Regarding what makes performing creativity and personality education difficult, most HE teachers(64.71%) chose the lack of instructional materials and 40.11% of participants chose the lack of seminar and workshop opportunity. 38.5% chose the difficulty of developing an evaluation criteria or an evaluation tool while 25.67% responded that they do not know any means of performing creativity and personality education. Regarding the better way to support for creativity and personality education, the HE teachers chose in order from most to least: 'expansion of hands-on activities for students related to education on creativity and personality'(4.34), 'development of HE classroom culture putting emphasis on creativity and personality'(4.29), 'a proper curriculum on creativity and personality education that goes along with students' developmental stages'(4.27), 'securing enough human resource and number of professors who will conduct creativity and personality education'(4.21), 'establishment of the concept and value of the education on creativity and personality'(4.09), and 'educational promotion on creativity and personality education supported by local communities and companies'(3.94).

• Asia pacific journal of information systems
• /
• v.20 no.3
• /
• pp.139-166
• /
• 2010

The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.

• Asia pacific journal of information systems
• /
• v.23 no.4
• /
• pp.53-84
• /
• 2013

With rapid development of ICT (Information and Communications Technology), new services by the convergence of mobile network and application technology began to appear. Today, smart phone with new ICT convergence network capabilities is exceedingly popular and very useful as a new tool for the development of business opportunities. Previous studies based on Technology Acceptance Model (TAM) suggested critical factors, which should be considered for acquiring new customers and maintaining existing users in smart phone market. However, they had a limitation to focus on technology acceptance, not value based approach. Prior studies on customer's adoption of electronic utilities like smart phone product showed that the antecedents such as the perceived benefit and the perceived sacrifice could explain the causality between what is perceived and what is acquired over diverse contexts. So, this research conceptualizes perceived value as a trade-off between perceived benefit and perceived sacrifice, and we need to research the perceived value to grasp user's continuous intention to use of smart phone. The purpose of this study is to investigate the structured relationship between benefit (quality, usefulness, playfulness) and sacrifice (technicality, cost, security risk) of smart phone users, perceived value, and continuous intention to use. In addition, this study intends to analyze the differences between two subgroups of smart phone users by the degree of personal innovativeness. Personal innovativeness could help us to understand the moderating effect between how perceptions are formed and continuous intention to use smart phone. This study conducted survey through e-mail, direct mail, and interview with smart phone users. Empirical analysis based on 330 respondents was conducted in order to test the hypotheses. First, the result of hypotheses testing showed that perceived usefulness among three factors of perceived benefit has the highest positive impact on perceived value, and then followed by perceived playfulness and perceived quality. Second, the result of hypotheses testing showed that perceived cost among three factors of perceived sacrifice has significantly negative impact on perceived value, however, technicality and security risk have no significant impact on perceived value. Also, the result of hypotheses testing showed that perceived value has significant direct impact on continuous intention to use of smart phone. In this regard, marketing managers of smart phone company should pay more attention to improve task efficiency and performance of smart phone, including rate systems of smart phone. Additionally, to test the moderating effect of personal innovativeness, this research conducted multi-group analysis by the degree of personal innovativeness of smart phone users. In a group with high level of innovativeness, perceived usefulness has the highest positive influence on perceived value than other factors. Instead, the analysis for a group with low level of innovativeness showed that perceived playfulness was the highest positive factor to influence perceived value than others. This result of the group with high level of innovativeness explains that innovators and early adopters are able to cope with higher level of cost and risk, and they expect to develop more positive intentions toward higher performance through the use of an innovation. Also, hedonic behavior in the case of the group with low level of innovativeness aims to provide self-fulfilling value to the users, in contrast to utilitarian perspective, which aims to provide instrumental value to the users. However, with regard to perceived sacrifice, both groups in general showed negative impact on perceived value. Also, the group with high level of innovativeness had less overall negative impact on perceived value compared to the group with low level of innovativeness across all factors. In both group with high level of innovativeness and with low level of innovativeness, perceived cost has the highest negative influence on perceived value than other factors. Instead, the analysis for a group with high level of innovativeness showed that perceived technicality was the positive factor to influence perceived value than others. However, the analysis for a group with low level of innovativeness showed that perceived security risk was the second high negative factor to influence perceived value than others. Unlike previous studies, this study focuses on influencing factors on continuous intention to use of smart phone, rather than considering initial purchase and adoption of smart phone. First, perceived value, which was used to identify user's adoption behavior, has a mediating effect among perceived benefit, perceived sacrifice, and continuous intention to use smart phone. Second, perceived usefulness has the highest positive influence on perceived value, while perceived cost has significant negative influence on perceived value. Third, perceived value, like prior studies, has high level of positive influence on continuous intention to use smart phone. Fourth, in multi-group analysis by the degree of personal innovativeness of smart phone users, perceived usefulness, in a group with high level of innovativeness, has the highest positive influence on perceived value than other factors. Instead, perceived playfulness, in a group with low level of innovativeness, has the highest positive factor to influence perceived value than others. This result shows that early adopters intend to adopt smart phone as a tool to make their job useful, instead market followers intend to adopt smart phone as a tool to make their time enjoyable. In terms of marketing strategy for smart phone company, marketing managers should pay more attention to identify their customers' lifetime value by the phase of smart phone adoption, as well as to understand their behavior intention to accept the risk and uncertainty positively. The academic contribution of this study primarily is to employ the VAM (Value-based Adoption Model) as a conceptual foundation, compared to TAM (Technology Acceptance Model) used widely by previous studies. VAM is useful for understanding continuous intention to use smart phone in comparison with TAM as a new IT utility by individual adoption. Perceived value dominantly influences continuous intention to use smart phone. The results of this study justify our research model adoption on each antecedent of perceived value as a benefit and a sacrifice component. While TAM could be widely used in user acceptance of new technology, it has a limitation to explain the new IT adoption like smart phone, because of customer behavior intention to choose the value of the object. In terms of theoretical approach, this study provides theoretical contribution to the development, design, and marketing of smart phone. The practical contribution of this study is to suggest useful decision alternatives concerned to marketing strategy formulation for acquiring and retaining long-term customers related to smart phone business. Since potential customers are interested in both benefit and sacrifice when evaluating the value of smart phone, marketing managers in smart phone company has to put more effort into creating customer's value of low sacrifice and high benefit so that customers will continuously have higher adoption on smart phone. Especially, this study shows that innovators and early adopters with high level of innovativeness have higher adoption than market followers with low level of innovativeness, in terms of perceived usefulness and perceived cost. To formulate marketing strategy for smart phone diffusion, marketing managers have to pay more attention to identify not only their customers' benefit and sacrifice components but also their customers' lifetime value to adopt smart phone.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.2
• /
• pp.51-61
• /
• 2018

As Korean society becomes more matured, more people consider trust valuable, as a social capital. Researchers introduced trust literatures focusing on public policy, sociology than business. In this paper, it is empirically analyzed how Organizational Justice, Shared Values, Organizational Trust, 3 dimensions of social capital explained by Nahapiet & Ghoshall, together with Job Satisfaction and Innovative Behavior, as a proxy of performance at the organizational level. The results of this study are as below. Firstly Organizational Justice, consisted of 4 sub-variables of Distributional Justice, Procedural Justice, Interpersonal Justice and Informational Justice, classified by Colquitt, affects Job Satisfaction positively. Secondly Shared Values, consisted of 2 sub-variables of CEO's Core Value and Organizational Culture, availing Competing Value Model of Cameron & Quinn, affect Job Satisfaction positively. Thirdly Job Satisfaction, consisted of 2 sub-variables of economical satisfaction and self-efficacy, affects Innovative Behavior positively. Lastly Organizational Trust has mediating effect on the relationship between Job Satisfaction and Innovative Behavior. However, while the direct effect of Job Satisfaction on Innovative Behavior shows 69%, the indirect effect of Organizational Trust on Innovative Behavior shows 31%, which may not be ignorable. Furthermore in case of smaller organization with less than 30 members, the indirect effect of Organizational Trust shows 64%, comparing to 36% of direct effect of Job Satisfaction. This study was able to confirm that organizations need to maintain Organizational Trust as much as they strive to increase Job Satisfaction through securing Organizational Justice and Shared Values in order to effectively increase Innovative Behavior. For small organizations with less than 30 members, they can never achieve Innovative Behavior without Organizational Trust. Conclusively it is acknowledged that Organizational Trust is the most important prior condition for innovation and long-term survival of SME ventures.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.38-45
• /
• 2006

The thermal filter press dewatering(TFPD) technology to improve the dewaterability through increasing the inner vapor pressure, lowering the filtration viscosity and forming the porosity easily within cake as applying the heat at the sludge layer was developed in this study. The hot water with temperature of $95^{\circ}C$ and pressure of $1.2kg_f/cm^2$ was supplied to the heating plate equipped between filter plates with plate size of $470{\times}470mm$ and material of polypropylene. Sludge was dewaterd by supplying pressure of $5kg_f/cm^2$ and then by squeezing pressure of $15kg_f/cm^2$. As a results of estimating the characteristics of thermal dewatering to consider the initial water content and organic content to be influenced by a period of water shortage and rainwater, the dewatered cake water content was about 35 wt% and dewatering velocity was $4DSkg/m^2{\cdot}hr$ under the rainwater period, and the dewatered cake water content was about 50 wt% and dewatering velocity was $1.5DSkg/m^2{\cdot}hr$ in the case of sludge of water shortage season. These results was superior to the mechanical dewatering performance with water content of 70wt% and dewatering velocity of $0.9DSkg/m^2{\cdot}hr$. On the base of the results of TFPD, energy consumpted to deal with DS(Dry Solid) of 1kg was estimated by 300 kJ. It was analyzed that the energy consumption of TFPD was decreased about one third with comparison to the dryer system. Dewatering velocity of this technology was faster than the one of mechanical dewatering equipment and it was easier to product low water content cake. Therefore, this technology was recognized that dewaterability was predominant because of the fast of dewatering velocity and production of low water content cake, and also this known as economical efficiency was excellent because of low energy consumption in comparison with dryer.

• The Journal of Small Business Innovation
• /
• v.20 no.3
• /
• pp.1-17
• /
• 2017

There is a serious information asymmetry between internal managers and outside investors in the process during IPOs. One mechanism that mitigates this information asymmetry is a high quality auditor. Since prior research document auditors' effect on newly listed firms at the IPO year, what has not yet been revealed in previous studies is the behavior of firms and auditors after listing. In this study, we investigate (i) the firms tendency of contracting with Big N auditors, and (ii) the effect of Big N auditors on accounting quality after the years of IPOs. Using a sample of 7,678 (1,892 firm-years of after IPOs, and 5,786 control firm-years) KOSDAQ observations between 2002 and 2012, we find that the likelihood of contracting with Big N auditor lasts only for two years after IPO compare to that of non-IPO control years. Secondly, we find that the effect of Big N auditors on clients' earnings management lasts for a very short period after IPO. These findings suggest that although prior literature argue that Big N auditors reduce earnings management of their clients, at least the period right after IPO, it is not consistent. Our study contributes to the existing literature in several ways. First, we provide new evidences of firms' auditor selection decisions by investigating years after the listing. In second, as an evidence of accruals reversal, we document decrease in discretionary accruals after IPOs. Third, we find that there is not always a positive relation between Big N auditor and accounting quality by showing the insignificant Big N auditor effect after IPOs. Our results also suggest several implications to IPO related stakeholders. First, to IPO firms, we provide evidences that decisions of hiring auditors affect firms earnings. Also, lead IPO underwriters may consider how these decisions influence future performance. Second, investors may want to use information not only in the preofferings but also after public offerings. Our study insists that auditor hiring decisions affects their own welfare. Finally, accounting standard setters may find these results useful for evaluating how much discretion they should allow corporate managers to hire auditors. In addition, our result casts doubt on auditor designation.