• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_1
• /
• pp.927-939
• /
• 2022

This study was conducted to develop a Web-GIS based monitoring module of smart city that can effectively respond, manage and improve situation in all stages of illegal dumping management on a city scale. First, five technologies were set for the core technical elements of the module configuration. Five core technical elements are as follows; video screening technology based on motion vector analysis, human behavior detection based on intelligent video analytics technology, mobile app for receiving civil complaints about illegal dumping, illegal dumping risk model and street cleanliness map, Web-GIS based situation monitoring technology. The development contents and results for each set of core technical elements were evaluated. Finally, a Web-GIS based 'illegal dumping monitoring module' was proposed. It is possible to collect and analyze city data at the local government level through operating the proposed module. Based on this, it is able to effectively detect illegal dumpers at relatively low cost and identify the tendency of illegal dumping by systematically managing habitual occurrence areas. In the future, it is expected to be developed in the form of an add-on module of the smart city integration platform operated by local governments to ensure interoperability and scalability.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.1
• /
• pp.105-113
• /
• 2024

The natural gas dehydration process plays a central role in liquefying LNG. This study proposes two natural gas dehydration process systems applicable to liquefied natural gas (LNG) liquefaction plants, and compares and analyzes energy optimization measures through simulation. The fuel gas from feed stream (FFF) case, which requires additional equipment for gas circulation, disadvantages are design capacity and increased energy. On the other hand, the end flash gas (EFG) case has advantages such as low initial investment costs and no need for compressors, but has downsides such as increased power energy and the use of gas with different components. According to the process simulation results, the required energy is 33.22 MW for the FFF case and 32.86 MW for the EFG case, confirming 1.1% energy savings per unit time in the EFG case. Therefore, in terms of design pressure, capacity, device configuration, and required energy, the EFG case is relatively advantageous. However, further research is needed on the impact of changes in the composition of regenerated gas on the liquefaction process and the fuel gas system.

• Journal of Internet Computing and Services
• /
• v.10 no.6
• /
• pp.51-79
• /
• 2009

Today the service industry is growing, and differentiated services for marketing and service quality is emerging as a serious problem. Until now, the WebCam is used for observation, and the negative aspects, such as from a human rights issue has become. Discipline and Punish is not to use a webcam to customer satisfaction research is needed. Therefore, wireless monitoring in WebCam service quality of the service reconfiguration and service quality factors for the configuration of the customer's preference regarding how research was recognized. Configuration of the service quality factors WebCam service customer satisfaction and customer loyalty was to identify factors that affect. These services to study the correlation between the quality variables WebCam provides wireless monitoring services for the preschool and children, a survey of the house. Configuring a wireless monitoring service quality in order to research the factors WebCam video quality and transmission speed, mobility and portability, convenience, visibility, reliability, and the interaction of the castle set. Severely and video quality and transmission speed, visibility, reliability, customer satisfaction, the interaction factors are said. Inclination to participate in social issues, innovation, digital devices that use a skilled, depending on the difference in the service quality has been confirmed. However, the age and quality of service awareness and job types showed a low correlation, and the marketing of these results will be discussed and how that can be used.

• Journal of Venture Innovation
• /
• v.2 no.1
• /
• pp.119-130
• /
• 2019

In this study, we intend to test whether experience variables such as sense, feel, think, relate, and action experiential activities of farming village can be usefully applied to revisit intention. As a result, we found that the sense, relate, and action experiences were adopted, while the feel and think variables were rejected, leading to the conclusion that Schmitt's (1999) experiential marketing theory was also applied to 6th industry experience marketing activities in rural areas. Therefore, the significant effect of rural experience activities on revisiting intention is thought to be related to the fact that they stimulated sensitivities by drawing attention and interest of consumers during the 6th industrial experience configuration, and to the environmental facilities connected to the experience site. The Feel experience has been rejected due to limitation of development of emotional element from the 6th industry certification business experience program, leading to the necessicity for development of a program that can stimulate the consumer's emotions. The reason why the Think experience was rejected is that the experience of the rural area 6th industry did not create surprises or curiosity, and thus does not meet the expectations of consumers. In case of relational experience, experiential marketing through social organizational relationship formation is expanding, and in case of behavioral experience, experience of 6th industry constitutes experience related to interaction with others and lifestyle.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2012

In this research, a single-axis attitude control test bed is developed, and simulation and tests experiments are performed, as a preliminary research of a quad-rotor aerial vehicle development. A single-axis test bed with seesaw configuration is manufactured using two motors and propellers, and the aerodynamic parameters are derived by thrust tests. The response of the system is estimated with Matlab/Simulink, and experiments are performed with attitude control computer and an attitude sensor onboard the test bed. Comparing the results of simulated and tested data, factors of steady-state errors during experiments are found, and performances of used attitude control algorithm and the control computer were verified. In these process, essential preliminary data for attitude control of a quad-rotor unmanned aerial vehicle were acquired.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.481-488
• /
• 2016

This study is about comparing the mobile user experience of Facebook and Instagram which are most often used among the recent SNSs by the people in their 30s and under. This study analyzed the user experience level after dividing the user experience factors through the Creating Pleasurable Interfaces model, and suggested the mean analysis as well as the result of Wilcoxon rank test which is a nonparametric statistics method. As a result of study, the Display information visually factor in functional factor and the configuration of the main page in convenient factor were a statistically significant difference in the mobile user experience of Facebook and Instagram. It is expected that this study may help seeking the user experience factors to be promoted preferentially in a competitive situation through the statistical comparative evaluation of the experience of two SNS users.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.7
• /
• pp.627-633
• /
• 2003

The effects of alloying-element additions to Ag sheath on thermal conductivity and mechanical properties of Bi-2223 superconductor tapes have been evaluated. In order to evaluate the effects of sheath alloys and their configuration on the properties of tape, various combinations of Ag and Ag alloys were selected as the inner and outer sheath. Thermal conductivity of the tapes was evaluated by using thermal integral method at 10 ∼120 K. It was observed that the addition of Mg, Sb, and Au to Ag sheath significantly decreased the thermal conductivity at low temperature probably due to the alloying effect. Specifically, the thermal conductivity of AgMg, AgSb, and AgAu at 40 K were 411.4, 142.3, and 109.7 W/(m·K), respectly, which is about 2∼9 times lower than that of Ag (1004.6 W/(m·K)). In addition, the thermal conductivity of alloy-sheathed tape was significantly dependent on their thermal conductivities of constituent sheath materials. The mechanical properties of alloy-sheathed tapes were also evaluated. Yield strength and tensile strength were improved but workability decreased for alloy-sheathed tapes.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.12
• /
• pp.1388-1396
• /
• 2011

This paper is focused on the procedure of the development of a micro air vehicle which has vertical take-off and landing capability for indoor reconnaissance mission. Trade studies on mission feasibility led to the proposal of a coaxial rotorcraft configuration as the platform. The survey to provide a guide for preliminary design were conducted based on commercial off-the-shelf platform, and the rotor performance was estimated by the simple momentum theory. To determine the initial size of the micro air vehicle, the modified conventional fuel balance method was applied to adopt for electric powered vehicle, and the sizing problem was optimized with the sequential quadratic programming method using MATLAB. The designed rotor blades were fabricated with high strength carbon composite material and integrated with the platform. The developed coaxial rotorcraft micro air vehicle shows stable handling quality with manual flight test in indoor situation.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.4
• /
• pp.49-65
• /
• 2011

The survey method was used in this descriptive study. The purpose in this study was to investigate middle school home economics(HE) teachers' stages of concern, levels of use, and perception about career education, based on the Concerns Based Adoption Model(CBAM). Questionnaire was administrated to middle school HE teachers over the whole country except Jeju Island through mail or e-mail by systematic random sampling. 118 data collected from the responses were finally analyzed statistically with mean, standard deviation, frequencies, percentage, and independent-sample t-test by using SPSS/WIN 12.0 program. The results of the study were as follows: First, most-HE teachers were in stages of the personal concern (86.56) and the informational concern(85.42) about HE career education. Second, the highest number of teachers was in level of refinement(33.1%) use. Third, teachers recognized important goal of HE career education as 'understanding of diverse careers and formating of positive values and attitude about work'. Also they had generally conducted HE career education through 'Understanding Teenager' chapter of a first-year middle school. However they had struggled with difficulty such as lack of data, time, and expertise in conducting HE career education. Therefore, it is necessary that support such as development, supplies, and training opportunities of career education should be provided.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.123-134
• /
• 2020

With the recent development of 3D printers, there is a growing need to make them similar to real products. As a result, FDM full-color 3D printers have been developed and actively distributed, but GUI design has fallen short of that, causing confusion among users. Accordingly, this study conducted a literature survey, and through a case study, the current status of FDM full-color 3D printers was identified and the components of GUI design were analyzed based on prior research. The draft checklist was drawn up according to the components of the derived GUI design, and 24 items were deleted through the three Delphi surveys and the validity of the remaining 26 items was verified. As a result, the layout should consist of intuitive screen configuration and menus with high frequency of use, and the text should be intuitive and clearly communicated. In addition, the icon should be placed in a visible position and used in real life to image it. Finally, we could see that the color should be used to give feedback to the user using the highlight color and not overlap the output.