• Nuclear Engineering and Technology
• /
• 제31권2호
• /
• pp.182-191
• /
• 1999

The sorption of UO$_{2}$$^{2+}$ onto goethite and kaolinite under various experimental conditions was successfully interpreted using surface complexation modeling (SCM). The SCM approach used in this work is the triple-layer model (TLM) in which weakly bonded ions are modeled as outer-sphere (ion-pair) complexes and strongly bonded ions as inner-sphere (surface coordination) complexes. The change of ionic strength did not affect the U(VI) sorption onto goethite, thus the formation of inner-sphere surface complexes, (FeO)$_2$UO$_2$ and (FeO)$_2$(UO$_2$)$_3$OH$_{5}$ was assumed to simulate the effects of ionic strength and goethite concentration. On the other hand, the U(VI) sorption onto kaolinite showed ionic strength dependence, thus the formation of AlO-UO$_{2}$$^{2+}$(outer-sphere complex) and SiO(UO$_2$)$_3$OH$_{5}$ (inner-sphere complex) was assumed to simulate the experimental data. In the presence of carbonates, the sorption of U(VI) onto kaolinite decreased in the weakly alkaline pH range. This was well simulated assuming the formation of a outer-sphere surface complex, A1OH$^{2+}$- (UO$_2$)$_2$CO$_3$OH$_3$. Since SCM approach uses thermodynamic data such as surface complexation constants, it is more predictive than empirical modeling approach in which conditional values such as partition coefficient are used. used.

• 통합자연과학논문집
• /
• 제8권4호
• /
• pp.235-243
• /
• 2015

Rhodium(I)-complex of $[Rh(CO)_2I_2{^-}]$ catalyzed carbonylation of anhydrous-trimethylamine in the presence of methyl iodide to give DMAC (N,N-dimethylacetamide) in no solvent. The catalyst had been reused 20 times, the analyses and distillation of collected products showed that the yields of DMAC, MAA (N-methylacetamide), and DMF (N,N-dimethylformamide) were 82.3%, 12.6%, and 4.4%. The conversion rate of trimethylamine was 99 % and the selectivity of DMAC was 82.3% with TON (Turnover Number) of 700. Stepwise procedure of inner-sphere reductive elimination for the formation of DMAC was suggested instead of acyl iodide intermediate.

• Bulletin of the Korean Chemical Society
• /
• 제19권3호
• /
• pp.324-327
• /
• 1998

The mechanisms of Cu2+ adsorption onto goethite, hematite and kaolinite are different. Goethite and hematite showed a similar adsorption behavior (ionic-strength independent), but kaolinite gave somewhat different result (ionic-strength dependent). These experimenal results were successfully simulated using a surface complexation model, TLM, which defines the inner- or outer-sphere complex. The chemical nature of Cu2+ adsorption onto kaolinite was qualitatively identified by EPR spectroscopy.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1616-1622
• /
• 2022

Selenium has been identified as an element of interest for the safety assessment of a deep geological repository (DGR) for used nuclear fuel. In Canada, groundwaters at DGR depths in sedimentary rocks have been observed to have a high ionic strength. This paper examines the sorption behavior of Se(-II) onto illite, MX-80 bentonite, Queenston shale, and argillaceous limestone in Na-Ca-Cl solutions of varying ionic strength (0.1-6 mol/kgw (m)) and across a pH range of 4-9. Little ionic strength dependence for Se(-II) sorption onto all solids was observed except that sorption at high ionic strength (6 m) was generally slightly lower than sorption at low ionic strength (0.1 m). Illite and MX-80 exhibited the expected results for anion sorption, while shale and limestone exhibited more constant sorption across the pH range tested. A non-electrostatic surface complexation model successfully predicted sorption of Se(-II) onto illite and MX-80 using the formation of an inner-sphere surface complex and an outer-sphere surface complex. Optimized values for the formation reactions of these surface species were proposed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.220-223
• /
• 2008

A test facility to measure the performance of a KM(Kick Motor) is constructed, and prediction of blast wave propagation over the facility is performed to check if the safety of test personnel in MCC(Main Control Center) can be guaranteed even for the most severe explosion. Assuming that the initial explosion energy is contained in a sphere under the pressure of 500, 1000, 1500 psi, respectively, the radius of the sphere is determined for each pressure to set the mass of contained explosion gas to 35 kg. The material properties of explosion gas are set to be the ones of KM propellant combustion gas under normal condition. To reduce the effort and time required for a complex three-dimensional modeling, the flowfield is approximated to axismmetry. Calculations are performed for all three initial pressure conditions, and the analysis of the result is given for 1500 psi which is expected to be the worst case. The maximum pressure is 3.5 psig while the minimum pressure is -1.2 psig on the outer wall of MCC, and the maximum pressure difference between the inner and outer walls of protection wall amounts to 3.0 psi.

• 대한화학회지
• /
• 제30권5호
• /
• pp.475-482
• /
• 1986

$Ni^{2+}$와 D-penicillamine사이의 착물형성반응에 대한 반응속도 및 평형에 관한 수용액중에서 실시하였다. 속도론적 실험은 압력-급변법을 사용하여 pH8~9범위에서 실시하였다. D-Penicillamine은 질소와 유황원자를 주게로 하여 pH＞9.2조건에서 $Ni^{2+}$이온에 배위하나 pH값 8.25∼9.07범위에서 총괄 안정도 상수값이 급격히 감소하며 비해리된 mercapto기가 결합에 참여하지 않는 것으로 밝혀졌다. 또한 이 착물 형성반응에 있어 율속단계는 $Ni^{2+}$이온의 내부 배위권으로 부터 물분자가 유리되는 과정임이 밝혀졌다.

• 한국광물학회지
• /
• 제11권1호
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• 대한화학회지
• /
• 제39권1호
• /
• pp.29-34
• /
• 1995

구리(II)-아민류 착물에 의한 l-ascorbic acid의 산화반응속도를 pH 4.6에서 Onishi 방법으로 측정하였다. 이 반응의 메커니즘은 l-ascorbic acid가 구리(II) 착물에 배위된 다음 속도결정단계에서, 전자이동이 일어나는 내부권 메커니즘에 따라 반응이 진행됨을 알았다.

• Bulletin of the Korean Chemical Society
• /
• 제11권4호
• /
• pp.303-306
• /
• 1990

Kinetic studies were carried out for the redox reaction of $[Co(NH_3)_4(C_2O_4)]^+$ with aqueous $[Fe(H_2O)_6]^{2+}$ solution in the present of $H^+$ by UV/VIS-spectrophotometric method. It was found that the order of $H^+$ for the reaction is first one in the higher $H^+$ concentration range of $1.67×10^{-1} M{\sim}1.00 M,$ while second order in the lower range of $6.30×10^{-2} M{\sim}1.67{\times}10^{-1} M.$ Reaction order of the substrates was found to be first order with respect to each of them. Accordingly overall reactions are third or fourth order. The results of calculation for the Extended Huckel Molecular Orbital theory contribute to estimate the preferred intermediates, bridging form of binuclear complex. On the basis of these results, we propose that this redox reaction proceed via inner-sphere reaction mechanism.

• 대한화학회지
• /
• 제33권2호
• /
• pp.225-231
• /
• 1989

$trans-[Co(en)_2X_2](ClO_4)_n$가 Co(II) 상태의 착물로 (X : 시아나이드, 나이트라이트, 암모니아, 그리고 이소티오시아네이트)되는 전극 환원반응 속도상수를 탄소전극에서 순환전압전류법 및 회전원판전극을 이용하여 측정하고 수은전극에서 순환전압전류법 및 펄스폴라로그래피법으로 측정하여 착물의 분광학적 흡수파수와 관계를 조사하였다. 탄소전극에서는 흡수파수가 증가할 때 전극반응의 활성화자유에너지가 증가하며 좋은 직선성을 보이지만 $NO_2^-$가 배위된 착물의 경우에는 수은전극에서 흡수파수와 활성화에너지의 관계가 비선형적이었으며 활성화엔트로피 역시 크게 나타났고 전극반응 전이계수도 크게 얻어졌다. 수은전극에서는$NO_2^-$가 배위된 착물은 다른 착물과 다르게 innersphere 메카니즘으로 환원되며 $NO_2^-$가 수은전극 표면으로 배향되어 전자전이가 일어나는 것으로 제안하였다.