• 대한전기학회논문지:전력기술부문A
• /
• 제55권8호
• /
• pp.334-340
• /
• 2006

Copper is widely used in electric wire, cable, conductor in electric devices. As the demand for electric power is increasing rapidly, electric power devices are getting amazingly bigger and complicated. The using of light-weight conductor can reduce the size and making cost of the electric devices. In high-frequency application, Electric current in a conductor tends to shift to the surface of the conductor, resulting in an uneven current distribution in the inner conductor. In the extreme case the current may essentially concentrate in the 'skin' of the inner conductor as a surface current. In high frequency application, therefore, inner area of copper conductor may replace with aluminum conductor, which reduces the weight of conductor. This paper describes the manufacture and evaluation of composite conductors made of copper and aluminum. The optimum extruding ratio was 16 at $300^{\circ}C$. The electrical resistance of manufactured composite bus bar was $57{\mu}{\Omega}$ at DC and $49.5{\mu}\{Omega}$ at 300Hz.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.834-842
• /
• 1997

Controlled Ca impurity implanted inner crack-like pore in the high purity alumina single crystal, sapphire, had been created by micro-fabrication technique, which includes ion implantation, photo-lithography, Ar ion milling, and hot press technique. The morphological change and the healing of cracklike pore in Ca doped high purity single crystal alumina, sapphire, during high temperature heat treatment in vacuum were observed using optical microscopy. The dot-like surface roughening was developed and hexagon like crystal appeared on inner surface of crack-like pore after heat treatment. Bar type crystals, probably CaO.6Al2O3, were observed on the inner surface after 1 hour heat treatment at 1, 50$0^{\circ}C$, but this bar type crystal disappeared after 1 hour heat treatment at 1, $600^{\circ}C$. This disappearance means that there should be a little increase of Ca solubility limit to alumina at this temperatures.

• 한국세라믹학회지
• /
• 제35권11호
• /
• pp.1155-1161
• /
• 1998

브라운관 funnel glass 내며의 흑연 피막의 저항에 관하여 연구하기 위하여 흑연이 함유된 도전성 도료를 제조하여 flow coating 방법으로 28" wide TV용 funnel glass 내면에 도포하고 흑연피막의 특성과 브라운관의 동작 특성을 평가하였다. 고형분 농도가 증가함에 따라 도전성 도료의 점도와 흑연피막의 두께는 증가하였으며 흑연피막의 전기저항은 감소하였다. 도포 후 건조조건에 따라서도 도전막의 표면상태, 전기저항 및 브라운관의 초기동작 특성등이 다르게 나타났다. 도전성 도료의 고형분 농도는 27%, 점도는 13 cps 전후에서 안정한 흑연피막을 제조할 수 있었으며, 이 때 진공특성이 최적의 상태로 나타났다. 그리고 도전성 도료의 상태와 제조조건에 따라서 브라운관의 다른 전지적 특성들도 변할 수 있기 때문에 브라운관 전체의 특성을 동시에 평가를 해야한다고 생각한다. 그리고 funnel glass에서의 부의 별 저항산포 차리를 줄이기 위해서는 도포 시에 도전성 도료를 주입하는 위치, 건조 조건, funnel glass의 예열 온도 등에 대한 조사도 이루어져야 한다고 생각한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.161-168
• /
• 1999

A series of centrifuge model tests were performed in order to investigate the behaviors of various tunnel linings. A 1/100-scaled aluminum and hydrostone horseshoe tunnel linings with a radius km, height km were buried in a depth of C/D=3 with dry Joomunjin standard sand, the relative density of which was 86%. Bending moments and thrusts along the tunnel circumference were measured by 12 strain gages. Earth pressures in soil and on lining were estimated by pressure transducers, ground surface settlements at center and edges by using LVDTs. Average Ko(coefficient of earth pressure at rest) was 0.39 for the model sand. The structural behaviors of lining depended on its damaged conditions. But, as a rule, on the crown, the tensile circumferential strain of lining occurred at the inner surface, and the compressive at the outer surface, then positive bending moment was created at the crown. The circumferential strain of the inner surface on the springline was tensile, and the outer compressive, so negative bending moment was measured at the springline. For hydrostone linings, cracks initiated at the inner surface on the crown, and the outer on the springline over average 40g.

• 한국압력기기공학회 논문집
• /
• 제15권2호
• /
• pp.71-80
• /
• 2019

In this study, limit load equations of thick-walled pipes with inner and outer circumferential surface cracks were derived based on force and moment equilibrium conditions. Since the limit load equations based on the mean radius at uncracked ligament, previously proposed by Kanninen et al., are based on the premise that the pipe wall thickness is relatively thin, the existing limit load solutions are only applicable to thin-walled pipes. In order to analyze the effect of the pipe thickness and surface crack depth on the limit load results, the predictions using the present limit load equations are compared with those using the existing solutions for thin-walled pipes. Being derived considering the thickness effect, the limit load solutions from this paper are believed to be more accurate for thick-walled pipes than the limit load equations presented for thin-walled pipes, and thus to be valuable equations for integrity assessment of thick-walled pipes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.309-310
• /
• 2006

This paper is about the development of surface inspection of bearing inner and outer race using machine vision. Before this system is developed, most inspections are performed by workers' naked eye. To improve both the inconvenience and incorrectness, another new tester is introduced. This system has the three sections mainly. First one is the mechanism section which transfers bearing manufactured from previous process line to the testing process in plant. Another is the inspection system which is composed of two parts: computer vision and measurement system using laser diode which inspects the defects of the bearing inner or outer race. The other is the pneumatic cylinder part controlled by Programmable Logic Controller(PLC). The system which is developed shows favorable results, and that has the advantage of convenience and correctness compared to previous system.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.122-126
• /
• 2013

The surface roughness of the inner and outer surfaces of a tube is an important requirement for nuclear fuel cladding. When an inner SiC clad tube, which is considered as an advanced Pressurized Water Cooled Reactor (PWR) clad with a three-layered structure, is fabricated by Chemical Vapor Deposition (CVD), the surface roughness of the substrate, graphite, is an important process parameter. The surface character of the graphite substrate could directly affect the roughness of the inner surface of SiC deposits, which is in contact with a substrate. To evaluate the effects of the surface roughness changes of a substrate, SiC deposits were fabricated using different types of graphite substrates prepared by the following four polishing paths and heat-treatment for purification: (1) polishing with #220 abrasive paper (PP) without heat treatment (HT), (2) polishing with #220 PP with HT, (3) #2400 PP without HT, (4) polishing with #2400 PP with HT. The average surface roughnesses (Ra) of each deposited SiC layer are 4.273, 6.599, 3.069, and $6.401{\mu}m$, respectively. In the low pressure SiC CVD process with a graphite substrate, the removal of graphite particles on the graphite surface during the purification and the temperature increasing process for CVD seemed to affect the surface roughness of SiC deposits. For the lower surface roughness of the as-deposited interlayer of SiC on the graphite substrate, the fine controlled processing with the completed removal of rough scratches and cleaning at each polishing and heat treating step was important.

• 한국해안해양공학회지
• /
• 제17권4호
• /
• pp.269-279
• /
• 2005

새만금호의 방조제 완공이후와 내부 개발이후 만경강 및 동진강의 홍수량 유입과 내부 수위를 관리하기 위해 수문을 작동할 매 수리특성이 어떻게 반응할 것인가를 평가하기 위한 수치실험이 수심적분된 ADCIRC 모형을 이용하여 실시되었다. 2차원 동적하도추적에 따르면, 상류에서는 홍수수문의 시간적 변화가 민감하나 홍수파가 호 내로 유하 하면서 급확대되는 물리적 특성에 따라 호 중심부터는 안정화된다. 평상시 관리수위를 유지하기 위해 수문을 제어하는 경우, 내부개발이후가 방조제 완공직후에 비해 수문 인근영역에서 유속, 수위 등에 동적응답이 즉각적으로 보다 크게 일어나고, 외해수를 호 내측으로 받아들이면 불규칙 수면교란이 일시적으로 발생하는데 내부개발 전후에 따라 최대 10km 및 16km정도까지 상류방향으로 전파된다.

• Applied Microscopy
• /
• 제30권2호
• /
• pp.205-212
• /
• 2000

Present study was performed to observe the surface ultrastructures of Stictadora furcatum (Trematoda: Heterophyidae). Adult worms were recovered from the cat experimentally infected with metacercariae, and were prepared for scanning electron microscopy. The body was leaf-like and ventrally concave. The oral sucker armed with prominent tegumental spines on the inner surface, and it's lips were obscure. Sensory papillae (type I) in single or grouped forms symmetrically arranged around the oral sucker. The ventrogenital opening retained protruding gonotyl spines and sperms discharged from the genital pore . The body surface was covered with scale-like multipointed tegumental spines. The density and digitated point of spines were gradually decreased toward the posterior end of the body. The digitated points of spines on the anterior portion were 9-12, on the middle were 7-8 and 5-6, and on the posterior were 2-3 and peg-like. Although the tegumental ultrastructure of S. fuscatum was generally similar to those of other heterophyid flukes , the oral sucker with tegumental spines on the inner surface and without obvious lips, and the ventrogenital opening with protruding gonotyl spines were suggested to be the characteristic features.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2744-2749
• /
• 2008

Numerical calculations are carried out for the natural convection induced by temperature difference between a cold outer square cylinder and a hot inner circular cylinder for Rayleigh number of $Ra=10^7$. This study investigates the effect of the inner cylinder location on the heat transfer and fluid flow. The location of inner circular cylinder ($\delta$) is changed vertically along the center-line of square enclosure. The natural convection bifurcates from unsteady to steady state according to $\delta$. Two critical positions of ${\delta}_{C,L}$ and ${\delta}_{C,U}$ as a lower bound and an upper bound are ${\delta}_{C,L}=0.05$ and ${\delta}_{C,U}=0.18$, respectively. Within the defined bounds, the thermal and flow fields are steady state. When the inner cylinder locates at ${\delta}{\geq}{\delta}_{C,U}$, the space between the upper surface of inner cylinder and the top surface of the enclosure forms a relatively shallow layer where the natural convection characterized as the pure Rayleigh-Benard convection forms alternately the upwelling and downwelling plums, as a result that a series of cells known as Benard cells is derived.