• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.102-106
• /
• 2012

The purpose of this paper is to study the failure cases in relation to system of Air Bag in vehicle happened in the field. In the first example, it was separated the soldering parts connected the wire pin between air bag module and clock spring of air bag. Whenever the pin shake by the car's vibration, the driver verified the malfunction phenomenon appeared air bag warning lamp on instrument panel in front of driver's seat. in car inside room. The second example, it verified the warning lamp lighting phenomenon of air bag by produced the circuit plate non-contacting of single an element in air bag electronic control unit. The third example, it verified the light of air bag warning indicator lamp by separated with soldering parts connecting inner pin and resistance terminal of seat belt pretensioner using passenger seat. The fourth example, when the passenger car crash a back of truck, the former bumper get jammed under the latter as the roof height of car low less than that. Therefore, the impact of Car's collision verified that don't transfer with body frame of vehicle because of no attachment impact sensor in it.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.129-134
• /
• 2017

In the present society, our current technology associated with bakery industry has been improved as much as technical development can get abreast of the Western one where the bread has originated and has been awarded and ranked in the highest level of many bakery or pastry competitions. In these trends, many people are running for high value added business such as bakery industry and bakery $caf{\acute{e}}$, etc. with big interest. However, high labor cost of technician and difficulties in human resource management become obstruction factors in the growth of the bakery industries. Therefore, in this paper, the designed system for both dividing and rounding dough quickly and exactly at the same time was studied. The main function of this system is to divide the original dough into 3 tracks and then, to place 4 doughs in the inner track, 12 doughs in the mid track, 20 doughs in the outer track, totally 36 doughs in a routine. It takes much energy because 36 doughs can be completed in a routine. Therefore, this system uses hydraulic pressure and a 0.75Kw induction motor is used for dough rounding. This system can make primarily fermented dough into 36 divided doughs very quickly and exactly on a guide panel at the desired weight by dividing it within 1-9 seconds and by rounding each within 1-9 seconds. This system is very effective in bakery industry to minimize labor cost and it is expected to supply more hygienic products to the customers.

• Cartoon and Animation Studies
• /
• s.27
• /
• pp.99-125
• /
• 2012

Shojo manga, one of Japan's comic genres, is well-known around the world. There is an equivalent manga genre in Korea and it is called Sunjeong Manhwa. What distinguishes shojo manga from other comic genres is its unique visual representation of the inner world of comic characters. In this study, shojo manga depicted in various shojo magazines in the early 1960s are analyzed. The magazines reviewed include Shojo, Shojo Club and Shojo Book. Among the visual representations, flower expression, panel composition and title page design are selected for analysis. Based on the results of the analysis, the basic elements of shojo manga are portrayed well in manga published in the early 1960s, during which several female cartoonists actively led the creation of the said genre. These findings confirm that the representations adopted in shojo manga for the purpose of expressing the inner world and psychological aspects of the main characters were already evident in the early 1960s. According to earlier studies, shojo manga reached its golden age in the 1970s, when the genre's format and representation method were developed to its full extent. Therefore, studies investigating shojo manga often focused on this golden era, during which a variety of comics emerged and stories and presentation skills further improved. An increasing number of readers began reading shojo manga. Popular cartoonists also emerged, further accelerating the genre's burgeoning popularity. However, there has been no investigation on the unique representations found in shojo manga. This means that the shojo manga published between the late 1950s and the early 1960s were underestimated compared with those published in the 1970s. The aim of this study, therefore, is to reassess the comic works and cartoonists that led to the establishment of shojo manga by analyzing visual representations of shojo manga published from 1958 to 1963. This study proposes new ideas on when the unique representations of shojo manga first emerged and how those representations were described.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.1
• /
• pp.13-23
• /
• 2009

To intensively analyze and examine the changes in palatability of cooked rice and structural properties of rice grains influenced by increased nitrogen topdressing during the panicle formation and ripening stage, a series of experiments were carried out using three japonica rice cultivars with contrasting rice quality characteristics. The protein content of brown rice increased maximally up to $35{\sim}47%$ of that in standard N6 plot with the increase in nitrogen topdressing fertilizer during 20 days before heading to 10 days after flowering. The high-yielding rice cultivars showing poor palatability of cooked rice revealed larger increase in protein content of rice grains by increased nitrogen topdressing. Under the same nitrogen level of 15 kg per 10a with nitrogen topdressing at 3 kg/10a, high-yielding rice cultivars, Yumehikari and Reihou showed the significant increase in protein content of brown rice when topdressing was applied at 10 days after flowering as compared with when it was applied at 30 days after transplanting. Although the variation in amylose content of milled rice as affected by nitrogen topdressing level was relatively small, it decreased within 1% with the opposite tendency against increased protein content of brown rice by increased nitrogen topdressing. The total score of sensory evaluation was higher in the order of Hinohikari < Yumehikari < Reihou in panel test. It decreased significantly by increased amounts of nitrogen topdressing during 20 days before heading to 10 days after flowering when nitrogen level was higher than 12 kg/10a. The more poor palatable rice cultivar in panel test revealed the larger decreasing in total score of sensory evaluation by higher nitrogen topdressing rates. All sensory evaluation components were largely affected by the change in protein content of brown rice rather than amylose content of milled rice. The influence of protein content to palatability of cooked rice was larger in poor-palatable rice than in high-palatable rice. The protein content decreased drastically from outer layer to inner layer of rice grains, while the amylose content increased on the contrary. The high-palatable rice exhibited higher distribution of protein content on bran layer but lower distribution of protein content on the layer of polished rice as compared with the poor-palatable rice. Especially, the high-palatable rice showed also significantly lower distribution of amylose content on the outer layer of polished rice as compared with the poor-palatable rice.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.427-436
• /
• 2001

The effects of storage form (paddy and milled rice) and storage period (1, 2, and 3 years) of rice at low temperature $(4^{\circ}C)$ on physicochemical properties of milled and cooked rice and sensory characteristics of cooked rice were investigated. The proximate compositions except moisture content of rice decreased as the storage period increased. Water binding capacity, solubility and swelling power of rice flour decreased with the extended storage period. In the amylogram, the initial pasting temperature, paste viscosity and breakdown of paddy rice flour slurry decreased after 2 years of storage. Moisture content of cooked rice increased while the amount of water evaporated during cooking decreased. These trends were obvious with the longer storage period. Lightness and yellowness of cooked rice were greatly changed after 3 years of storage, regardless of storage form. Texture profile analysis of cooked rice by Texture Analyzer revealed that hardness, fracturability, gumminess were gradually increased while adhesiveness decreased as the storage period of rice increased. A trained panel found that color intensity, intactness of grains, rancid flavor, rice bran flavor, wet cardboard flavor, hardness and chewiness of cooked rice increased with the longer storage period. However, glossiness, transparency, plumpness, puffed corn flavor, dairy flavor, boiled egg white flavor, sweet taste, adhesiveness to lips, smoothness and inner moisture decreased with the extended storage period up to 3 years. Instrumental hardness was highly correlated with sensory hardness.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.63-73
• /
• 2009

Recently, the use of lightweight panels in building structures has been increasing. Of the various lightweight panel types, styrofoam sandwich panels are inexpensive and are excellent in terms of their insulation capacity and their constructability. However, sandwich panels that include organic material are quite vulnerable to fire, and thus can numerous casualties in the event of a fire due to the lack of time to vacate and their emission of poisonous gas. On the other hand, lightweight foamed concrete is excellent, both in terms of its insulation ability and its fire resistance, due to its Inner pores. The properties of lightweight concrete is influenced by foaming agent type. Accordingly, this study investigates the insulation properties by foaming agent type, to evaluate the possibility of using light-weight foamed concrete instead of styrene foam. Our research found thatnon-heating zone temperature of lightweight foamed concrete using AP (Aluminum Powder) and FP (animal protein foaming agent) are lower than that of light-weight foamed concrete using AES (alkyl ether lactic acid ester). Lightweight foamed concrete using AES and FP satisfied fire performance requirements of two hours at a foam ratio 50, 100. Lightweight foamed concrete using AP satisfied fire performance requirements of two hours at AP ratio 0.1, 0.15. The insulation properties were better in closed pore foamed concrete by made AP, FP than with open pore foamed concrete made using AES.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.57-71
• /
• 2015

This study was conducted to develop the fertigation system with a peristaltic hose pump and brushless DC motor. The fertigation system was consisted of sensor, main controller, motor control unit, peristaltic pump, water supply pump, control panel, and filter. The peristaltic pump discharges liquid by squeezing the tube with rollers. Rollers attached to the external circumference of the rotor compresses the flexible tube. The fluid is contained within a flexible tube fitted inside a circular pump casing. The developed fertigation system has no mixing tank but instead injects directly a concentrated nutrient solution into a water supply pipe. The revolution speed of the peristaltic pump is controlled by PWM (Pulse width modulation) method. When the revolution speed of the peristaltic pump was 300rpm, the flow rate of the 3.2, 4.8, 6.3mm diameter tube was 202, 530, 857mL/min, respectively. As increasing revolution speed, the flow rate of the peristaltic pump linearly increased. As the inner diameter of a tube larger, a slope of graph is more steep. Flow rate of three roller was more than that of four roller. Flow rate of a norprene tube with good restoring force was more than that of a pharmed tube. As EC sensor probe was installed in direct piping in comparison with bypass piping showed good performance. After starting the system, it took 16~17 seconds to stabilize EC. The maximum value of EC was 1.44~1.7dS/m at a setting value of 1.4dS/m. The developed fertigation system showed ±0.06dS/m deviation from the setting value of EC. In field test, Cucumber plants generally showed good growth. From these findings, this fertigation system can be appropriately suitable for fertigation culture for crops.