• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1553-1555
• /
• 1994

In this paper, we describes the research in condenser cone of $SF_6$ gas sealing end for 345KV oil-filled cable. The designed of condenser cone based on the results electric field analysis by electrostatics theory ana FEM. As a results. we have been designed the condenser cone and the inner insulation part of $SF_6$ seating end, the width and length, the number of condenser, the length of stress relief slope, the total length of condenser cone.

• 대한수학교육학회지:수학교육학연구
• /
• 제25권2호
• /
• pp.177-188
• /
• 2015

본 논문은 평면과 공간에서 두 벡터의 곱에 대한 역사적 발달 과정을 살펴보고, 이를 바탕으로 벡터의 내적과 외적을 연결하기 위한 교육적 시사점을 도출하였다. 역사적 분석의 결과, 평면에서 방향이 다른 두 선분의 곱을 정의하려는 노력은 두 선분의 길이의 곱과 방향각의 합이라는 기하학적 의미와 함께 복소수의 연산 규칙을 확립함으로써 복소수를 수학적 대상으로 승인하는 계기를 제공하였음을 확인하였다. 또한 3차원 공간에서 방향이 다른 두 선분의 곱을 정의하려는 노력은 사원수의 도입을 이끌었으며, 사원수의 곱으로 나타나는 실수부분과 벡터부분이 각각 벡터의 내적과 외적의 현대적인 정의로 발전하였음을 확인하였다. 이러한 분석 결과를 토대로 기하학적 관점에서 벡터의 내적과 외적을 각각 다른 방식으로 정의하여 서로 관련이 없는 것으로 인식하도록 만드는 현재의 전개방식에 대해 반성하고, 이 두 곱을 연결시키기 위한 한 가지 방안을 제시하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.327-330
• /
• 2006

This paper represents the numerical analysis on effects of radius ratio in a concentric annulus with a rotating inner cylinder. The numerical model consisted of two cylinder which inner cylinder is rotating and outer cylinder is fix, and the axial direction is used the cyclic condition because of the length for axial direction is assumed infinite. The diameter of inner cylinder is assumed 86.8mm, the numerical parameters are angular velocity and radius ratio. Also, the whole walls of numerical model have no-slip and the working fluid is used water at $20^{\circ}C$. The numerical analysis is assumed the transient state to observe the flow variations by time and the 3-D cylindrical coordinate system. The calculation grid adopted a non-constant grid for dense arrangement near the wall side of cylinder, the standard $k-{\omega}$ high Reynolds number model to consider the effect of turbulence flow and wall, the fully implicit method for time term and the quick scheme for momentum equation. The numerical method is compared with the experimental results by Wereley and Lueptow, and the results are very good agreement. As the results, TVF isn't appeared when Re is small because of the initial flow instability is disappear by effect of the centrifugal force and viscosity. The vortex size is from 0.8 to 1.1 for TVF at various $\eta$, and the traveling distance for wavy vortex have the critical traveling distance for each case.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.40-47
• /
• 2015

In this study, temperature characteristics and fire damage form were analyzed to investigate flame spreading form and fire probability from ignition sources subject to drivit component materials which is finishing material in architecture. Ignition sources were limited to a gas torch and exterior panel board fire, and the size of the sample was manufacture in 30 cm length ${\times}$ 50 cm height ${\times}$ 5cm thickness size. Marble (inner wall) + 3 mm drivit (outer wall), marble (inner wall) + 4 mm plaster stone (outer wall), sandwich panel + 3 mm driver bit (outer wall), sandwich panel + 3 mm driver bit + insulation (outer wall), and gypsum board (inner wall) + 3 mm drivit (outer wall) were prepared for the sample. As result of the research for temperature characteristics, large temperature difference by each material was shown in $218^{\circ}C{\sim}995^{\circ}C$ at 30 seconds and $501^{\circ}C{\sim}1078^{\circ}C$ at 300 seconds. Especially when the inner wall was a plaster board, lowest temperature of $501^{\circ}C$ was shown at 300 seconds and marble inner wall showed the following lowest temperature of $900^{\circ}C$. Temperature rising over $1000^{\circ}C$ was shown in other materials. Regarding fire damage form, drivit or gypsum board outer wall parts exposed to fire showed combustion and carbonization to show calcination(breaking phenomenon) and influence of heat exposure was higher as calcination became more severe.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.40-44
• /
• 2019

Experimental studies have been carried out to investigate characteristics of gas explosion using a multi layered water gel barrier in a vented explosion chamber. The chamber is consisted of 1600 mm in length, with a square cross-section of $100{\times}100mm^2$. The gel concentration of inner layer of MLWGB ranged from 10% to 90% with intervals of 10% by weight of gel. Displacement of the MLWGB was photographed with a measured using a high-speed video camera, and pressure development was measured using a data acquisition system. It was found that MLWGBs with 10 ~ 20% inner layer concentrations were ruptured during the explosions. As the concentrations of inner layer increased from 30% to 90%, the barriers were not ruptured. As the gel concentrations of the inner layer increased, the displacement increased toward the chamber exit and the pressure decreased for the ruptured barriers. It was found that the pressure attenuation obtained from the MLWGB was higher than that of the single water gel barrier. For the cases of non-ruptured barriers, the pressure inside the chamber less increased with increasing gel concentrations of the inner layer. It was also found that the displacement moved back into the chamber for non-ruptured MLWGBs, and it was sensitive to the gel concentrations.

• 수산해양기술연구
• /
• 제55권3호
• /
• pp.181-189
• /
• 2019

Discarding juvenile fishes under girth 16 cm nearly equal to inner perimeter of codend mesh size collected by a cover net method in bottom trawl. The body size of the main five species (mackerel, horse mackerel, sea bream, melon seed and black throat seaperch) was measured for their body length, girth, weight, height and width and analyzed size selectivity. Frequency of penetrating fish as retention in a cover net was less than 40% of total number of juvenile discarding fish. The most of body length or girth of five species were significantly different between in the codend and in the cover net. The 50% selection girth in the cover net ranged 8-11 cm were smaller than those in the codend ranged 9-13 cm by the species respectively. The 50% selection body length was significantly related with the ratio of body height (H) by body width (W) both for in the codend or in the cover net while 50% selection girth was not significantly related with H/W. Furthermore 50% selection fish size by fish species between in the codend and in the cover net was not significantly different both in body length or girth. Therefore, the girth selectivity represented possibly as one unique value regarding fish body shape was considered as more useful method for multi-species catch in trawl.

• 한국지반신소재학회논문집
• /
• 제2권1호
• /
• pp.47-55
• /
• 2003

14가지 니들펀치 부직포 지오텍스타일의 섬유구성인자인 두께, 기공도, 섬유장 및 직경 등이 수평투수성에 미치는 영향을 평가하였으며, 두께변화, 수평투수도, 압축 하중 하에서의 수평투수성을 구성방정식에 의해 분석, 평가하였다. 그리고 섬유 패킹 밀도가 다른 라미나(laminar) 지오텍스타일 복합재료를 제조하여 라미나 구조가 수직투수성에 미치는 영향을 평가하였다. 수평투수도는 부직포 지오텍스타일의 두께가 증가할수록 커졌으며, 기공도와 섬유직경이 커질수록 수평투수계수는 증가하였다. 수직응력이 증가할수록 기공도의 영향은 감소하였으며, 섬유장이 길수록 수평투수계수는 약간 크게 나타났다. 구성섬유의 직경이 클수록 수평 투수계수는 커지며, 직경의 비슷할수록 유사한 투수계수를 나타내었다. 라미나 지오텍스타일의 수직 투수성은 내부 경계면에서의 손실 수두에 영향을 받으며, 경계면에서 투수로의 연결형상은 bell mouth형이거나 부드러운 유입관 형태로 평가 되었다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제9권2호
• /
• pp.273-277
• /
• 2004

Variation in the size of the silk filament will determine the uniformity and quality of the silk reeled. In the present study, an attempt has been made to study the filament size variation in 6 multivoltine parental breeds and 9 multivoltine ${\times}$ bivoltine hybrids in all three seasons of a year. All multivoltine breeds and multivoltine ${\times}$ bivoltine hybrids showed variation in filament size throughout its length from the outer layer to inner layer. Results of the present study indicated that the size of the filament decreased from outer to inner layer. The decrease in filament size was sudden in some breeds/hybrids whereas it was gradual in other. Relationship between filament length to that of slope, average filament size to slope, and maximum filament size to slope was determined based on regression analysis. Regression analysis revealed significant positive correlation between slope vs average filament length (r=0.92$^{**}$) in multivoltine${\times}$bivoltine hybrids. Among parental breeds, 96C showed lowest slope of the curve (b-value: -0.00428) and 96A showed highest slope of the curve (b-value: -0.00269). Among 9 hybrids, PM${\times}$N $B_4$ $D_2$ recorded lowest slope value (b-value: -0.00328) and BL24${\times}$N $B_4$ $D_2$ showed highest value for slope of the curve (b-value: -0.00234). The breed 96C, which showed lowest slope value can be utilized for future breeding programmes to breed strains with less size deviation. Three multivoltine${\times}$bivoltine hybrids viz., PM${\times}$N $B_4$ $D_2$, 96E${\times}$CSR19 and BL67${\times}$CS $R_{101}$ , which showed less slope values (b-values: -0.00328, -0.00300 and -0.00297 respectively) can be utilized for commercial exploitation to produce uniform silk.k.

• Journal of Forest and Environmental Science
• /
• 제27권3호
• /
• pp.151-156
• /
• 2011

Seeds of Xanthoceras sorbifolia Bunge were collected from two plantations and two superior trees in Inner Mongolia: and one plantation and one superior tree in Liaoning, China in late August, 2011. Yellowhorn or goldenhorn is an important tree species, from the aspects of source of edible oil and biodiesel and pioneering capacity of degraded and desert land. Characteristics investigated were seed length, width, and weight: weight and volume of 1,000 seeds: and weight and volume of one-liter seeds. The seeds of Qingsonglingxiang No. 1, growing alone in an open space, showed the highest values in seed length (16.08 mm), width (14.48 mm) and weight (1.40 g), while those of Tree No. 160 in Ar Khorqin Banner were the lowest ones: that is, 11.48mm for length, 11.81 mm for width, and 0.73 g for weight, respectively. Traits of seeds varied quite much between trees and among areas; for example, Tree No. 38 and No. 160 produced quite different seeds in several traits, although they are adjacent to each other in the same farm. Weight of 1,000 seeds varied from 718.0 g to 1,010.1 g and volume from 0.76 L to 1.52 L. Weight of one-liter seeds were 522.3 g to 688.2 g, while the number of seeds were 603 to 935. Seeds which were soaked in the water at $4^{\circ}C$ for 2 days showed the highest germination rate (89%) in a 30-day test, which was about 10% to 40% higher than those of non-treatment and dipping treatment at $36^{\circ}C$ followed by keeping under room temperature for 2 days. 81% of seeds in the wet sand at room temperature germinated, while 23% of seeds deprived of seed coat germinated. It is necessary to understand seed traits to select superior clones or provenances for the increased, unfluctuating production of seed.

• Steel and Composite Structures
• /
• 제52권2호
• /
• pp.165-182
• /
• 2024

Grouted sleeve splice (GSS) is an effective type of connection applied in the precast concrete structures as it has the advantages of rapidly assembly and reliable strength. To decrease the weight and cost of vertical rebar connection in precast shear walls, a light-weight sleeve is designed according to the thick-cylinder theory. Mechanical behaviour of the light-weighted GSS is investigated through experimental analysis. Two failure modes, such as rebar fracture failure and rebar pull-out failure, are found. The load-displacement curves exhibit four different stages: elastic stage, yield stage, strengthening stage, and necking stage. The bond strength between the rebar and the grout increases gradually from outer position to inner position of the sleeve, and it reaches the maximum value at the centre of the anchorage length. A finite element model predicting the mechanical properties of the light-weighted GSS is developed based on the Concrete Damage Plasticity (CDP) model and the Brittle Cracking (BC) model. The effect of the rebar anchorage length is significant, while the increase of the thickness of sleeve and the grout strength are not very effective. A model for estimating ultimate load, including factors of inner diameter of sleeves, anchorage length, and rebar diameter, is proposed. The proposed model shows good agreement with various test data.