• 제목/요약/키워드: Inner Hole

검색결과 160건 처리시간 0.029초

한국고유종 남방종개 Iksookimia hugowolfeldi 후각기관의 형태 및 형태계측학적 연구 (The Morphology and Morphometry of the Olfactory Organ of Southern King Spine Loach, Iksookimia hugowolfeldi (Cypriniformes, Cobitidae))

  • 김현태;박종영
    • 한국어류학회지
    • /
    • 제32권2호
    • /
    • pp.49-54
    • /
    • 2020
  • 한국 고유종 남방종개 Iksookimia hugowolfeldi 후각기관의 형태 및 형태계측학적 특징을 확인하기 위해 실체 현미경을 이용하여 관찰하고 통계프로그램 SPSS로 분석하였다. 후각 기관의 외부 형태는 주둥이 좌우로 돌출된 튜브형의 전비공(직경 0.35~0.53 mm)과 눈모양의 후비공(장축 0.32~0.68 mm)으로 구성된다. 후각기관 내부에서는 14~21개의 후판으로 구성된 로제트 구조가 확인된다. 형태계측학적 분석에서 후판개수(수컷 vs. 암컷, 18±1.8 vs. 17±1.6)와 체장대비 후판개수 비율(24.2±1.3% vs. 21.7±2.5%)은 수컷이 암컷보다 더 높은 값을 나타냈다. 체장과 후판은 수컷에서 유의미한 상관관계(P<0.001)를 나타냈다. 이와 같은 남방종개의 후각기관 특징은 서식처 바닥의 모래를 파고 숨는 저서성 생활의 적응과 암수 간 생식에서의 후각의존성 차이를 반영하는 결과로 사료된다.

비차폐 환경에서의 고온초전도 SQUID 2차 미분기의 특성연구 (High-$T_c$ 2nd-order SQUID Gradiometer for Use in Unshielded Environments)

  • 박승문;강찬석;이순걸;유권규;김인선;박용기
    • Progress in Superconductivity
    • /
    • 제5권1호
    • /
    • pp.50-54
    • /
    • 2003
  • We have fabricated $∂^2$$B_{z}$ /$∂x^2$ type planar gradiometers and studied their properties in operation under various field conditions. $YBa_2$$Cu_3$$O_{7}$ film was deposited on $SrTiO_3$ (100) substrate by a pulsed laser deposition (PLD) system and patterned into a device by the photolithography with ion milling technique. The device consists of 3 pickup loops designed symmetrically Inner dimension and the width of the square side loops are 3.6 mm and 1.2 mm, respectively, and the corresponding dimensions of the center loop are 2.0 mm and 1.13 mm. The length of baseline gradiometer is 5.8 mm. Step-edge junction width is 3.0 $\mu\textrm{m}$ and the hole size of the SQUID loop is 3 $\mu\textrm{m}$ ${\times}$ 52 $\mu\textrm{m}$. The SQUID inductance is estimated to be 35 pH. The device was formed on a 20 mm ${\times}$ 10 mm substrate. We have tested the behavior of the device in various field conditions. The unshielded gradiometer was stable under extremely hostile conditions on a laboratory bench. Noise level 0.45 pT/$\textrm{cm}^2$/(equation omitted)Hz and 0.84 pT/$\textrm{cm}^2$/(equation omitted)Hz at 1 Hz for the shielded and the unshielded cases, which correspond to equivalent field noises of 150 fT/(equation omitted)Hz and 280 fT/(equation omitted)Hz, respectively. In spite of the short baseline of 5.8 mm, the high common-mode-rejection-ratio of the gradiometer, $10^3$, allowed us to successfully record magnetocardiogram of a human subject, which demonstrates the feasibility of the design in biomagnetic studies.

  • PDF

복합자재 콘칼로리미터평가방법에 대한 연구 (A Study on the Cone Calorimeter Evaluation Method of Sandwich Panels)

  • 박정우;조남욱
    • 한국화재소방학회논문지
    • /
    • 제31권6호
    • /
    • pp.74-82
    • /
    • 2017
  • 유기단열재를 사용한 샌드위치패널(복합자재) 건축물 화재는 소화가 어려우며, 가연성 심재를 통한 빠른 화재 확산으로 화재 시 피해가 크다. 샌드위치패널은 양면이 불연재로 되어있고, 불연재 사이에 심재인 단열재로 이루어져 있다. 단열재는 유기단열재와 무기단열재가 사용되고 있으며, 유기단열재가 무기단열재에 비하여 약 80% 이상 사용되고 있다. 유기단열재는 무기단열재에 비하여 경제적인 장점이 있지만 화재에 취약하다는 단점을 가지고 있기 때문에 샌드위치패널 화재 시 일반화재에 비하여 피해가 크다. 가스유해성시험의 경우 복합자재의 심재 위험성을 측정하기 위해 패널에 지름 25 mm 크기 3개의 원형 천공을 하여 시험하지만 콘칼로리미터 시험은 샌드위치패널 형태 그대로 시험을 진행한다. 본 연구에서는 KS F ISO 5660-1 콘칼로리미터 시험에서 복합자재의 경우 불연재인 표면에 가열한 경우와 천공을 통한 심재 노출 시험 및 심재에 직접가열 시 발생하는 화재의 위험성을 측정하였다. 시험에 사용된 유기단열재는 일반 EPS와 난연 EPS를 사용하였으며, 시험체 구성은 샌드위치패널, 천공된 샌드위치 패널, 심재의 3가지 형태로 시험을 진행하였다. 본 연구의 목적은 콘칼로리미터 시험 시 복합자재 심재의 화재 위험성을 평가하는 방안을 제시하고자 하였다.

흰눈섭황금새(Muscica narcissina zanthopygia HAY)의 생태-특히 번식경과와 육령기의 식습성 (Ecological Notes on Narcissus Flycatcher, Musciapa narcissina zanthopygia HAY - With special reference to the breeding process and feeding habits of nestlings during their nesting period-)

  • 원병오;이경조
    • 한국동물학회지
    • /
    • 제8권2호
    • /
    • pp.89-127
    • /
    • 1965
  • 1. This report is on the outcome of observation made up the breeding process of Narcissus flycatcher, Muscicapa narcissina zanthopygia, using 15 ness-boxes at Seoul and Kwang Nung Experimental forest in 1964, and the relevant feeding habit was studied by the collar method of wrapping the necks of thenestlings for 50-60 minutes or more in some cases from 1963 to 1964. 2. The Narcissus flycatcheris a common summer resident throughout Korea arriving at the end of April. The earliest data of arrival of this species in Seoul, is April 26, 1964. They migrate southward from the later part of September to early part of October. 3. In a week after their arrival , they start to build nest after a brief courtship. Male and female prepare their nest ina nestboxes in 4 or 5 days. Nests are usually found in the moss, which provide definite frame-work. The inner side of the nest is usually composed of roots of Gramineae or leaves of pine, oak or other broad leave tree. 4. The laying period is generally from the later part of April to the middle of June : and the number of eggs laid is from 3 to 8 , therefore 5 in average : eggs are pink with traces of milky yellow blending of light auburn and orange red spots and chicken-egg-like in shape. 5.The incubation takes place for 7-12 days from the middle part of May to the middle of June, in the order of male and female . The hatching rate tends to increase in proportion to clutch size. 6. The feeding period usually lasts 15 days in average from the early part of June to the middle of July and the feeding urge tends to increase in proportion to brood size. 7. The animals invading into their nest-boxes are red ants, chipmunks, bees , barkbeetles and philippine red-tailed shirkes, etc. 8. On the basis of analysis covering 714 birds in 31 nests, the food they consumed during the nesting period of nestlings were mostly of animal matters composing of : insect larvae form-39. 88% insect adult form 36.26%, insect pupae-0.19%, spider-17.75% and other animal matters 5.92% , Besides a small amount of plant pieces were found . As to the insect larvae, Lepidoptera was the largest in the content followed by Hymenoptera , Orthoptera and Coleoptera. As to the insect adult, Diptera was the largest in the content followed by Coleoptera, and Hymenoptera. In view of forest protection, noxious insect was of 69.38%, useful insect 4.39%, and spider 17.75%. 9. The rich assortment of its food, the ability of acquiring various insect (adults as well as larvae), its destruction of great numbers of harmful insects , and its quick assimilation artificial nesting with the nest-boxes of 2.5-3cm entrance hole employed, allow us to conclude that the flycatcher may be successfully employed in the elimination of fores pests. The above results are only that part obtained near Seoul in the middle of Korea, however, if we would extend the scheme to other broad areas using similar techniques, the nest-boxes could not only be well used by the birds, but also it would help to prevent the increase of harmful. insects.

  • PDF

THE EFFECT OF THE BIORESORBABLE COLLAGEN MEMBRANE ON THE REGENERATION OF BONE DEFECT BY USING THE MIXTURE OF AUTOGRAFT AND XENOGRAFT BONE

  • Lee Jung-Min;Kim Yung-Soo;Kim Chang-Whe;Han Jung-Suk
    • 대한치과보철학회지
    • /
    • 제41권3호
    • /
    • pp.325-341
    • /
    • 2003
  • Statement of problem: In cases where bony defects were present, guided bone regenerations have been performed to aid the placement of implants. Nowadays, the accepted concept is to isolate bone from soft tissue by using barrier membranes to allow room for generation of new bone. Nonresorbable membranes have been used extensively since the 1980's. However, this material has exhibited major shortcomings. To overcome these faults, efforts were made to develop resorbable membranes. Guided bone regenerations utilizing resorbable membranes were tried by a number of clinicians. $Bio-Gide^{(R)}$ is such a bioresorbable collagen that is easy to use and has shown fine clinical results. Purpose: The aim of this study was to evaluate the histological results of guided bone regenerations performed using resorbable collagen membrane($Bio-Gide^{(R)}$) with autogenous bone, bovine drived xenograft and combination of the two. Surface morphology and chemical composition was analyzed to understand the physical and chemical characteristics of bioresorbable collagen membrane and their effects on guided bone regeneration. Material and methods: Bioresorbable collagen membrane ($Bio-Gide^{(R)}$), Xenograft Bone(Bio-Oss), Two healthy, adult mongrel dogs were used. Results : 1. Bioresorbable collagen membrane is pure collagen containing large amounts of Glysine, Alanine, Proline and Hydroxyproline. 2. Bioresorbable collagen membrane is a membrane with collagen fibers arranged more loosely and porously compared to the inner surface of canine mucosa: This allows for easier attachment by bone-forming cells. Blood can seep into these spaces between fibers and form clots that help stabilize the membrane. The result is improved healing. 3. Bioresorbable collagen membrane has a bilayered structure: The side to come in contact with soft tissue is smooth and compact. This prevents soft tissue penetration into bony defects. As the side in contact with bone is rough and porous, it serves as a stabilizing structure for bone regeneration by allowing attachment of bone-forming cells. 4. Regardless of whether a membrane had been used or not, the group with autogenous bone and $Bio-Oss^{(R)}$ filling showed the greatest amount of bone fill inside a hole, followed by the group with autogenous bone filling, the group with blood and the group with $Bio-Oss^{(R)}$ Filling in order. 5. When a membrane was inserted, regardless of the type of bone substitute used, a lesser amount of resorption occurred compared to when a membrane was not inserted. 6. The border between bone substitute and surrounding bone was the most indistinct with the group with autogenous bone filling, followed by the group with autogenous bone and $Bio-Oss^{(R)}$ filling, the group with blood, and the group with $Bio-Oss^{(R)}$ filling. 7. Three months after surgery, $Bio-Gide^{(R)}$ and $Bio-Oss^{(R)}$ were distinguishable. Conclusion: The best results were obtained with the group with autogenous bone and $Bio-Oss^{(R)}$ filling used in conjunction with a membrane.

비침습적인 전기자극이 임프란트의 골융합에 미치는 영향;토끼경골에서의 조직계측학적 평가 (Effects of noninvasive electrical stimulation on osseointegration of endosseous implants;A histomorphometric evaluation in the rabbit tibia)

  • 손성배;박진우;서조영
    • Journal of Periodontal and Implant Science
    • /
    • 제35권3호
    • /
    • pp.635-648
    • /
    • 2005
  • The procedure that enhances osteogenesis and shortens the healing period is required for successful implant therapy. It has been introduced that osteogenesis is enhanced by the generation of electric field. Many researchers have demonstrated that application of electric and electromagnetic field promote bone formation. It also has been shown that electrical stimulation enhances peri-implant bone formation. Recently, several investigators have reported that noninvasive electrical stimulation using negatively charged electret such as polytetrafluoroethylene(PTFE) promotes osteogenesis. Therefore, we were interested in the effect of noninvasive electrical stimulation using negatively charged electret on the periimplant bone healing. After titanium implant were installed in the proximal tibial metaphysis of New Zealand white rabbit, negatively charged PTFE membrane fabricated by corana dischage was inserted into the inner hole of the experimental implant and noncharged membrane was applied into control implant. After 4 weeks of healing, histomorphometric analysis was performed to evaluate peri-implant bone response. The histomorphometric evaluations demonstrated experimental implant tended to have higher values in the total bone-to-implant contact ratio(experimental ; $49.9{\pm}13.52%$ vs control ; $37.5{\pm}19.44%$) , the marrow bone contact ratio(experimental ; $34.94{\pm}13.32%$ vs control ; $24.15{\pm}13.69%$), amount of newly formed bone in the endosteal region(experimental ; $1.00{\pm}0.30mm$ vs control ; $0.61{\pm}0.24mm$) and bone area in the medullary canal(experimental ; $13.55{\pm}4.98%$ vs control ; $9.03{\pm}3.05%$). The mean values of the amount of newly formed bone(endosteal region) and bone area(medullary canal) of the experimental implant demonstrated a statistically significant difference as compared to the control implant(p<0.05). In conclusion, noninvasive electrical stimulation using negatively charged electret effectively promoted peri-implant new bone formation in this study. This method is expected to be used as one of the useful electrical stimulation for enhancing bone healing response in the implant therapy

홍삼 내공검출을 위한 X-선 영상처리기술 (X-ray Image Processing for the Korea Red Ginseng Inner Hole Detection)

  • 손재룡;최규홍;이강진;최동수;김기영
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2002년도 동계 학술대회 논문집
    • /
    • pp.457-463
    • /
    • 2002
  • 이 연구는 x-선 투과영상을 이용하여 홍삼의 내공을 검출하기 위하여 수행되었다. 이를 위하여 x-선관에 조사되는 x-ray 양의 차이에 따른 위치별 밝기 값 차이를 보정하고 내공 검출에 적합한 영상처리 알고리즘을 개발하였다. 주요연구 결과를 요약하면 다음과 같다. 1) x-선관에 조사되는 x-ray양은 중심에서 가장자리로 갈수록 감소하며, 이것은 위치에 따른 gray 값의 분포가 달라지게 되는 원인이 되었다. 2) 홍삼을 2치화 하기 위해서는 동일한 x-선 조사강도에서 입력된 원 영상에서 빈 영상을 뺀 감산 영상을 만들어 줌으로써 가능하였다. 3) 조사강도 별 감산영상처리 결과 36kV/4.15mA와 39kV/4.15mA에서는 조사량이 많아서 홈삼 지근 부분의 영상이 손실되는 경우가 발생하였다. 4) 내공 검출을 위해서는 정상부분과 내공부분의 자기 값 차이를 크게 하는 전처리 영상을 만들 필요가 있었고, multiple 감산영상에서 뚜렷한 골짜기가 나타났으나 주근의 내공부분의 밝기값 보다 지근의 정상부분의 자기 값이 더 낮게 나타나 이를 보정하기 위하여 홍삼 위치에 따라 부분 보정된 알고리즘을 개발하였다. 5) x-선관의 놓인 위치에 따라서 내공판정시험 결과 중심에 있을 때에 비해 가장자리에 있을 때는 영상이 일부 손실되었으며, 중심 위치에서 서로 다른 굵기의 홍삼에 대해서는 모두 양호한 결과가 나타났다. 6) 완전한 홈삼으로 내공판정시험 결과 내공주위의 정상부분가지도 일부 내공으로 잘못 검출되었으나 이것을 재차 line profile에 의해 한 라인씩 문턱 값을 설정하여 내공만을 정확하게 판정하는 알고리즘을 개발하였다.양체의 접종작업은 모든 배양실이 인력에 의존하였으며, 배양체를 배지와 분리하여 불필요한 부분을 제거하고 배양작물에 따라 생육정도를 2~3등급으로 구분하여 배양용기의 배지 위에 치상하는 과정으로 수행되었으며, 작업능률은 호접란의 경우 배양병에 25본을 접종하는데 시간당 6병, 심비디움은 원형 플라스크에 25본을 접종하는데 시간당 10병 정도였다. 바. 식물체의 대량증식에 사용되는 플라스크, 배양병, PE용기 등 배양용기의 세척작업은 농원의 1개배양실에서 간이식 세척기, 이 외의 9개배양실은 모두 물에 담겨 두었다가 세제와 브러쉬 등을 사용하여 인력으로 세척하고 있어 생력화 기술개발이 요구되었다.도가 빠를수록 건조속도가 빨라졌으며, 건조에너지도 1,334kcal/kg.water로 비슷하게 소요되었다. 마. 시험구와 대비구의 건감률은 시험구에서 1.08~1.36w.b./h로 나타나 대비구보다 약 9.9~18.3%가 높게 나타났고, 건조에너지는 10.2~14.6%가 절감되었다. 발아율은 열풍온도가 낮을수록 높게 나타났고 시험구가 대비구보다 발아율이 낮게 나타났으며, 동할률 증가량도 원적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성

  • PDF

백제 제철로 및 제철기술의 복원을 위한 실험 고고학적 연구 (An experimental archaeological study on the Baekjae iron smelting furnace and its production process)

  • 이은우;한지선;채미희;김은지
    • 헤리티지:역사와 과학
    • /
    • 제48권4호
    • /
    • pp.138-153
    • /
    • 2015
  • 한국 고대 제철기술의 규명을 위한 연구의 일환으로 백제 4세기대 유적인 진천 석장리 B-23호 원형 제철로를 모델로 제철로를 복원하고 전통 방법에 의한 고대 철생산 실험을 실시하였다. 2014년도부터 예비실험을 포함하여 수차례의 실험을 실시하였으며 본 고에서는 1차 및 2차 실험 결과에 대해 검토하고자 한다. 원료와 연료는 각각 철광석(자철석)과 목탄(참나무숯)을 사용하였으며 송풍은 4인용 발풀무를 사용하였다. 제련 생성물은 대부분 노하부에 철괴, 슬래그, 목탄이 뒤섞인 상태로 되어 있었는데 배재부와 송풍관을 기준으로 절단하여 위치별 철괴의 양을 측정한 결과 주로 송풍관측에 상대적으로 많은 양의 철이 형성되었다. 철괴는 생성 위치에 따라 다른 형태의 미세조직과 함탄량을 갖는 것으로 나타났는데 전체적으로는 바닥부에 형성된 철의 함탄량이 상부에 형성된 철에 비해 높은 것으로 나타났다. 동일한 조업에서도 직접 단야 조업에 활용할 수 있는 철소재와 함탄량이 높아 탈탄 처리하거나 주조에 사용할 수 있는 상태의 다양한 철이 생성된 것을 확인하였다. 2차 실험 유출 슬래그를 제외하면 대부분 철함량이 낮은 유리질 슬래그가 형성된 것으로 보아 철과의 분리가 잘 된 것으로 여겨진다. 고고학적 자료를 기본으로 하여 고대 제철로를 복원하고 전통 방법에 의한 조업을 실시함으로써 고대의 철생산 공정에 대한 연구 자료를 확보할 수 있었으며 이를 바탕으로 향후 지속적인 실험을 실시하여 백제 제철기술을 규명할 수 있을 것으로 여겨진다.

<온천행궁도(溫泉行宮圖)>(1795)의 온양행궁지 추정 및 온양행궁 변천 고찰 (A Study on the Transitions and Site of temporary palace(Onyanghaenggung) according to the <Oncheonhaenggungdo>(1795))

  • 이정수;김일환;이경미;지원구;최재성
    • 헤리티지:역사와 과학
    • /
    • 제56권4호
    • /
    • pp.94-108
    • /
    • 2023
  • 온양행궁(溫陽行宮)은 <온궁영괴대(溫宮靈槐臺)>, 『온궁사실(溫宮事實)』<온천행궁도(溫泉行宮圖)>, 『영괴대기(靈槐臺記))』 등 문헌기록과 영괴대(靈槐臺)와 신정비(神井碑) 등 온행 유적 등을 통해 왕의 온행을 확인가능한 중요한 문화유산이다. 현재 온양행궁지로 추정되는 곳은 온양관광호텔이 입지하고 있어, 온양행궁 복원이 이루어지지 못한 채 그 정체성마저 위협받고 있다. 본 연구는 일제강점기 훼손 이전 『온궁사실』<온천행궁도>(1795)에 나타나는 온양행궁의 위치를 추정하는 것을 목적으로 하고 있다. 이를 위하여, 첫째 조선시대 역대 왕들의 온행관련 기록을 고찰하고, 둘째 조선시대 온양행궁의 건축물 변화 및 일제강점기 훼손과정 등을 정리한 후, 셋째 <온천행궁도> 및 읍지, 고지도 그리고 지적원도 등을 현재 온양관광호텔 및 주변 지역 변화와 비교분석하여 온양행궁의 위치를 추정하였다. 이상의 연구결과 다음과 같은 결론을 얻을 수 있다. 첫째, 「온양군읍지」 및 「호서읍지」의 1,758척을 주척(周尺)으로 환산하면, 온양행궁의 범위는 지적원도(1914년)의 대(垈)로 표현된 부지 내측 둘레와 근접하고 있다. 둘째, 지적원도의 온양관 남측 잡(雜)으로부터 온천천으로 나가는 물길, <온천분포견취도(溫泉分布見取圖)>(1925, 1928)의 온천공, 그리고 <온천행궁도>의 내동문(內東門), 비각(碑閣), 신정(神井), 답도 등의 관계를 종합하면, 헤르만 산더(Hermann Gustav Theodor Sander, 1906) 및 한국저작권위원회 온양온천 사진의 건축물을 『온궁사실』<온천행궁도>의 온천(溫泉) 즉, 탕실(湯室)로 추정할 수 있다. 셋째, 경남철도회사가 온양행궁지 유원화(遊園化) 과정에서 관유재산인 영괴대 부지의 양도 및 이전(1927)을 요청하나 충청남도는 국유 영괴대기념비 및 영괴대를 괴수(회나무)를 함께 현 위치에 영구보존(1928) 하도록 한 기록과 <조선경남철도연선명소교통도회(朝鮮京南鐵道沿線名所交通図絵)>(1929)를 참고하면, 영괴대비각(靈槐臺碑閣)은 현 위치로 판단되며 신정비는 신정관(神井館) 전면으로 이건되었음을 알 수 있다. 이상의 온양행궁 둘레범위, 『온궁사실』<온천행궁도>의 온천(溫泉) 즉, 탕실(湯室) 및 영괴대 위치 등을 기초로, 일제강점기 및 근대기 필지변화, 그리고 최근 주변 유구 등의 자료를 종합하면, <온천행궁도> 온양행궁지의 범위 및 주요 건축물 위치는 현재의 시민로 및 온양온천시장까지 확대하여 추정할 수 있다.

유연성 천공기를 이용한 Bankart 병변의 골관통식 봉합 - 동물 실험 및 예비 임상 결과 보고 - (Arthroscopic Transosseous Suture Repair for Bankart Lesion with a Flexible Drill Device - An Experimental and Preliminary Clinical Report -)

  • 박진수;원예연;유정한;박용욱;노규철;정국진;김홍균;황지효;이용범;서일우
    • Clinics in Shoulder and Elbow
    • /
    • 제13권1호
    • /
    • pp.72-78
    • /
    • 2010
  • 목적: 견관절의 Bankart 병변에 대하여서 관절경적 수술하에서도 골경유 봉합이 가능하도록 유연성 골 천공기를 개발하였으며 이에 대한 동물 실험 및 임상 증례를 보고하는 바이다. 대상 및 방법: 유연성 천공기 세트는 유연성 천공기와 유도관으로 구성되어 있다. 유연성 천공기는 49개의 미세강선들이 단일 강선 (직경 1.2 mm)으로 꼬인 구조로 이루어져 유연성이 있으며 이러한 유연한 강선의 한 쪽 끝에는 천공기 (직경 1.2 mm)가 용접되어 있는 구조로 이루어져 있다. 유도관은 외경 3.0 mm, 내경 2.0 mm의 원통형 금속 도관으로 이루어져 있으며 한 쪽 끝은 30도 정도 굴곡되어 있다. 기기의 내구성 및 임상적 유용성을 시험하기 위하여 돼지의 견갑골 관절와에 골 천공을 실시하는 실험을 30회 이상 실시하였다. 유연성 강선 부위의 기계적 파단이나 골 천공의 실패 등은 발생하지 않았다. 일반적 견관절 관절경 술식대로 견관절의 후방 입구 및 전 상방, 전 후방 입구들을 확보한 후 관절경하에서 Bankart 병변이 확인이 되면 면도기를 이용하여 견갑와 내측면의 변연 절제를 실시하여 골 출혈을 유도한다. 이후 관절경을 전 상방 입구로 이전 시키고, 후방 입구를 통하여서 유연성 골천공기 세트의 유도 강관을 삽입하는데 유도 강관의 끝이 견갑와연에서 약 5 mm 정도 안쪽에 위치되도록 한다. 유도강관 내로 유연성 천공기를 삽입한 후 구동기를 이용하여서 견갑와의 골 천공을 실시한다. 골 천공 후에는 유연성 천공기만 유도강관에서 제거한 후에 유도 강관내로 봉합사를 삽입하여 천공된 골구로 통과시키도록 한다. 봉합 갈고리를 이용하여 관절와순에 유도봉합사를 통과시킨 후에 이 유도봉합사에 골 천공구를 통과한 봉합사를 끼워서 관절완순을 통과하도록 한 후 활주 결찰을 실시하여 골 관통 봉합을 이루도록 한다. 동일한 방식으로 견갑와의 2시, 4시 방향에 골 천공을 시행하여 견갑와순의 봉합을 실시한다. 결과: 외상성 견관절 탈구 환자 5예에서 유연성 골 천공기를 이용한 Bankart 병변의 봉합을 실시하였다. 수술 도중 또는 수술후의 신경이나 혈관 손상 등의 문제점이나 합병증 등은 발생하지 않았으며 기기 자체의 문제들도 발생하지 않았다. 평균 6개월간의 추시 결과 상에서는 재탈구 등의 증상은 나타나지 않았다. 결론: 유연성 골 천공기를 사용한 Bankart 병변의 봉합시 관절경적 수술이면서도 골 관통식 봉합이 가능하여 관절와순의 부착면적의 증대 효과 뿐 아니라 손쉬운 활주 결찰이 이루어 질 수 있음을 보여주었다.