• 한국가구학회지
• /
• 제27권2호
• /
• pp.69-79
• /
• 2016

This paper explores the inlaying technique of Geum-Cheol Kim, a joiner has made the traditional Korean furniture mostly popular in Tong Yeong in Gyeongnam province in Korea. He has adopted the technique in creating his furniture since he started learning and working the furniture making at sixteen years old. So he is only the cabinet maker with the technique in Tong Yeong GN. Samhojang, Seongtaenoemun, Gwuinoemun, and so on are the techniques inlaid in the furniture like Jang, Nong, Beoseonjang, Mungap and so on. The Tong-yeong techniques are even more difficult and take longer time than other ordinary inlays to be created, but they are very secured and last longer. And the techniques are very beautiful but today they are not well-known and used in Korea. Hence, the succession and preservation of the techniques are needed from the joiner to younger generation. Futhermore, the development on the easier and shorter process to create them is needed to be popular throughout Korea in order to be useful for contemporary furniture.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.63-69
• /
• 2014

RFIDs have not become widespread as expected partly due to the cost, size, read range, and reliability problems of tags. The success rate of reading must be improved in order for RFIDs to be widely adopted. Quality control of tags is crucial to meet this requirement. In this study, we designed and implemented a high-performance reader used in inspection equipment that conducts prior inspection of tags. To improve performance of the developed reader, the baseband modem and command processor (CP) were designed using H/W logic and implemented with FPGA. The inspection of small pitch inlays was made possible through the antenna shielding device and H/W command processor function. This equipment enables accurate evaluation of performance and identification of tags satisfying a given read range. By contributing to sort out defective tags, the results can ultimately lead to more stable RFID services.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.334-346
• /
• 1997

Incidence of using esthetic composite resin in the posterior area is increasing but there were lots of inconsistent reports about their microleakage and marginal adaptation. The purpose of this study was to evaluate the differences of microleakage and marginal adaptation according to restorative techniques. 30 cavities with enamel gingival margin were prepared and restored with 3 types of composite resin [Z-100($Scotchbond^{TM}$ MP), AELITEFIL ($Onestep^{TM}$), Her culite XRV(Fuji BOND LC)] in direct technique and another 30 cavities were restored with preformed CR inlays and 3 different modern resin and resin-modified GI cements (Superbond C&B, Choice, Fuji Duet). Samples were chemically stressed in 75% ethanol for 24 hours and were thermocycled (5-$55^{\circ}C$(500 times. The degree of microleakage through proximal and gingival margins was examined by 1 % MB dye and the degree of marginal adaptation by examining the margins via SEM. The following results were obtained ; 1. In direct groups, Herculite XRV [Fuji BOND LC, 35.13 (15.50) %] group showed statistically different, less microleakage than Z-100 [$Scotchbond^{TM}$ MP, 72.91 (16.91 %] group and AELITEFIL [One-step, 93.73 (13.66) %] group (p<0.05). 2. In indirect groups, the degree of microleakage in Mean(S.D.) were: Super bond C & B [39.00 (24.35) %], Choice [57.19 (33.80) %], Fuji Duet [58.22 (40.36) %]. But there was no significant difference. 3. There was no significant difference between resin cement and resin-modified GI cement. 4. There were gaps at the interface with the tooth structure, but no gap was seen at the interface with restoration in all specimens. 5. In direct groups, Herculite XRV(Fuji BOND LC) group made little gap compared with other groups, but 40-$50{\mu}m$ thickness of bonding agent, Fuji BOND LC, looked like a cement used in indirect technique. 6. All indirect groups showed a variety of cement thickness, from less than $20{\mu}m$ to over $100{\mu}m$ and that dimension of buccal/lingual margin was less than that of gingival margin.

• 대한치과보철학회지
• /
• 제55권1호
• /
• pp.94-99
• /
• 2017

CAD/CAM (computer-aided design/computer-aided manufacturing) 기술을 이용한 인레이 및 여러 고정성 보철물의 제작이 보편화되고 구강내 스캐너가 널리 보급되면서 디지털 치의학의 개념이 치과 보철학 분야 전반에 적용되고 있다. 그러나 가철성 보철 부분에서는 디지털 개념의 적용이 쉽지 않으며 기존의 주조 방식에 많이 의존하고 있다. 따라서 가철성 보철물의 제작 과정에 이런 개념을 적용해보려는 시도는 중요한 의미가 있다. 본 증례에서는 하악 Kennedy class III 무치악 환자에서 보철적, 심미적 요구에 의한 교합고경의 증가와 함께 CAD 및 쾌속조형술(RP, rapid prototyping)을 이용한 가철성 국소의치를 제작하였다. CAD를 이용하여 서베잉 및 국소의치 금속 구조물을 설계하였으며, 쾌속조형술은 금속 구조물을 주조하기 위한 레진 패턴 제작에 이용하였다. 9개월 간의 임상적 관찰 기간 동안 만족스러운 심미적, 기능적 결과를 얻어 이를 보고하고자 한다.

• 대한치과기공학회지
• /
• 제42권1호
• /
• pp.9-16
• /
• 2020

Purpose: The purpose of this study was to compare the marginal and internal fit of lithium disilicate ceramic inlay produced by heat pressing that inlay pattern made by subtractive manufacturing and additive manufacturing method. Methods: A mandibular lower first molar that mesial occlusal cavity (MO cavity) die was prepared. After fabricating an epoxy resin model using a silicone impression material, epoxy resin die was scanned with a dental model scanner to design an MO cavity inlay. The designed STL pile was used to fabricate wax patterns and resin patterns, and then lithium disilicate ceramic inlays were fabricated using hot-press method. For the measurement of the marginal and internal gap of the lithium disilicate, silicone replica method was applied, and gap was measured through an optical microscope (x 80). Data were tested for significant differences using the Mann-Whitney Utest. Results: The marginal fit was 103.56±9.92㎛ in the MIL-IN group and 81.57±9.33㎛ in the SLA-IN group, with a significant difference found between the two groups (p<0.05). The internal fit was 120.99±17.52㎛ in the MIL-IN group and 99.18±6.65㎛ in the SLA-IN group, with a significant difference found between the two groups (p<0.05). Conclusion: It is clinically more appropriate to apply the additive manufacturing than subtractive manufacturing method in producing lithium disilicate inlay using CAD/CAM system.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.191-205
• /
• 1992

The purpose of this study was to evaluate the microleakage of class II composite resin inlays and compare them with the conventional light-cured resin filling restorations. Class II cavities were prepared in 60 extracted human molars with which cervical margins were located below 1.0mm at the cemento-enamel junction using No. 701 tapered fissure carbide bur. All of the prepared cavities were restored as follows and divided into 6 groups. Group I and 2 were restored using direct filling technique and group 3,4,5 and 6 were restored using direct inlay technique that was cemented with dual-cured resin cements. group I: Cavities were restored with light-curing composite resin, Brilliant Lux. group 2. Cavities were restored with light-curing composite resin, Clearfil PhotoPosterior. group 3: Cavities were restored with Clearfil CR Inlay and heat treated at $125^{\circ}C$ for 7 minutes. group 4: Cavities were restored with same material as group 3 and heat treated at $100^{\circ}C$ for 15 minutes. group 5: Cavities were restored with Brilliant (Indirect esthetic system) and heat treated at $125^{\circ}C$ for 7 minutes. group 6: Cavities were restored with same material as group 5 and heat treated at $100^{\circ}C$ for 15 minutes. All specimens were polished with same method and thermocycled between $6^{\circ}C$ and $60^{\circ}C$, then immersed in a bath of 2.0% aqueous solution of basic fuchsin dye for 24 hours. Dyed specimens were sectioned longitudinally and dye penetration degree was read on a scale of 0 to 4 by Tani and Buonocore's method 45). The results were as follows: 1. Microleakage was observed rather at the cervical margins than at the occlusal margins in all groups. 2. Composite resin inlay groups showed significantly less leakage than direct filling groups at the cervical margins (p < 0.001). 3. In composite resin inlay groups, there was no significant difference in microleakage between specimens by heat treating temperature and time (p > 0.05). 4. There was no significant difference in leakage between each groups at the occlusal margins (p > 0.05).

• Restorative Dentistry and Endodontics
• /
• 제30권3호
• /
• pp.158-169
• /
• 2005

본 연구는 간접 복합 레진 인레이 수복 시 기저재로 사용되는 광중합형 글래스아이오노머와 인레이 접착에 사용되는 레진 시멘트간의 접착 전까지의 시간 경과에 따른 전단 결합강도를 측정하고, 상아질과 글래스아이오노머, 글래스아이오노머와 레진 시멘트간 접착계면에 대해 SEM 관찰하였다. 2종의 광중합형 글래스아이오노머 시멘트 Fuji II LC (GC Co, Tokyo, Japan)와 Vitrebond$^{TM}$ (3M, Paul, Minnesota, U.S.A)의 시편을 제작하였다 5 mmx7 mm의 실리콘 주형에 Artglass$^{(R)}$ (Heraeus Kultzer, Germany)를 이용하여 레진 인레이를 제작하였다. 글래스아이오노머 베이스를 각 각 1시간, 24시간, 1주 및 2주 동안 37$^{\circ}C$ 증류수에 보관한 후 Variolink$^{(R)}$ II (Ivoclar Vivadent, Liechtenstein)를 적용하여 인레이를 접착하였다. 만능 물성시험기(Model 4302, Instron, U.S.A)를 이용하여 결합 면에 1 mm/min의 속도로 1000 kg 하중을 가하여 전단 결합강도를 측정하였고, one-way ANOVA를 이용하여 통계 분석하였다. SEM 관찰을 위해 발거된 제 3대구치에 2급 와동을 형성하였고, 기저재로 광중합형 글래스아이오노머 시멘트를 적용하였다. 인레이를 접착한 시편을 수직 절단하여 상아질, 글래스아이오노머, 및 복합레진 인레이 간의 계면을 SEM (JSM-5400$^{(R)}$ Jeol, Tokyo, Japan) 관찰하였다. 시간 경과에 따른 글래스아이오노머와 복합 레진 인레이 사이의 전단 결합강도는 통계학적으로 유의한 차이가 없었으며, 기저재 재료에 따른 전단 결합강도의 유의한 차이도 없었으며 대부분 시편에서 글라스아이오노머 내부에서 응집 파괴 (Cohesive failure)가 발생하였다. SEM 관찰 시 글래스아이오노머와 상아질 사이에 약 30-20 $\mu$rn 정도의 간극 (gap)이 형성되었으며 , 글래스아이오노머와 복합 레진 인레이 계면에서는 1시간 후 접착한 시편을 제외하고 간극은 발견되지 않았다.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.265-285
• /
• 1999

The purposes of this investigation were to observe the reaction kinetics of five commercial dual cured resin cements (Bistite, Dual, Scotchbond, Duolink and Duo) when cured under varying thicknesses of porcelain inlays by chemical or light activation and to evaluate the effect of the porcelain disc on the rate of polymerization of dual cured resin cement during light exposure by using thermal analysis. Thermogravimetric analysis(TGA) was used to evaluate the weight change as a function of temperature during a thermal program from $25{\sim}800^{\circ}C$ at rate of $10^{\circ}C$/min and to measure inorganic filler weight %. Differential scanning calorimetry(DSC) was used to evaluate the heat of cure(${\Delta}H$), maximum rate of heat output and peak heat flow time in dual cured resin cement systems when the polymerization reaction occured by chemical cure only or by light exposure through 0mm, 1mm, 2mm and 4mm thickness of porcelain discs. In 4mm thickness of porcelain disc, the exposure time was varied from 40s to 60s to investigate the effect of the exposure time on polymerization reaction. To investigate the effect on the setting of dual cured resin cements of absorption of polymerizing light by porcelain materials used as inlays and onlays, the change of the intensity of the light attenuated by 1mm, 2mm and 4mm thickness of porcelain discs was measured using curing radiometer. The results were as follows 1. The heat of cure of resin cements was 34~60J/gm and significant differences were observed between brands (P<0.001). Inverse relationship was present between the heat of reaction and filler weight % the heat of cure decreased with increasing filler content (R=-0.967). The heat of reaction by light cure was greater than by chemical cure in Bistite, Scotchbond and Duolink(P<0.05), but there was no statistically significant difference in Dual and Duo(P>0.05). 2. The polymerization rate of chemical cure and light cure of five commercially available dual cured resin cements was found to vary greatly with brand. Setting time based on peak heat flow time was shortest in Duo during chemical cure, and shortest in Dual during light cure. Cure speed by light exposure was 5~20 times faster than by chemical cure in dual cured resin cements. The dual cured resin cements differed markedly in the ratio of light and chemical activated catalysts. 3. The peak heat flow time increased by 1.51, 1.87, and 3.24 times as light cure was done through 1mm, 2mm and 4mm thick porcelain discs. Exposure times recommended by the manufacturers were insufficient to compensate for the attenuation of light by the 4mm thick porcelain disc. 4. A strong inverse relationship was observed between peak heat flow and peak time in chemical cure(R=0.951), and a strong positive correlations hip was observed between peak heat flow and the heat of cure in light cure(R=0.928). There was no correlationship present between filler weight % or heat of cure and peak time. 5. The thermal decomposition of resin cements occured primarily between $300^{\circ}C$ and $480^{\circ}C$ with maximum decomposition rates at $335^{\circ}C$ and $440^{\circ}C$.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.473-484
• /
• 1994

To investigate the effect of resin cement, which had been known to increase the adhesive capacity of the cast gold inlay, on the gingival marginal fit and whether the tin-planting of the beveled area affects the marginal fit, Class II cast gold inlays were made on the 25 sound molars. Control group(ZPC goup) was cemented with the ZPC by conventional method. Experimental groups were cemented with the resin cement(Super-hond & $Panavia_{EX}$) and subdivided further by the existence or nonexistence of the tin-plating of the beveled area(ST & PT groups: with plating, SNT & PNT groups: without plating). So, each group was consisted of 5 teeth and the gingival margin of each specimen was mesiodistally sectioned by 3 times and the marginal and internal gap were evaluated by the Stereo Microscope (${\times}180$) and the Scanning Electron Micrascope(${\times}5,000$) was used for examining the adhesive relationship of the resin cement to the cavity wall and to the cast gold surface. The results were as follows : 1. Marginal gap was less than internal gap in all groups. 2. ZPC and SNT(bevel without tin-plating) groups showed the least gap and gap in PNT(bevel without tin-plating) group, ST(bevel with tin-plating) group, PT(bevel with tin-plating) group showed the greater value in order in evaluation of the both internal gap and marginal gap. 3. With the exception of the relationships between ZPC and SNT groups, ST and PNT groups, relationships between any other groups showed the statistical significance in the internal gap(p<0.05). 4. In the marginal gap, all relationships between groups showed the statistical significance (p<0.05) except the relationships between ZPC and SNT groups, ST and PNT groups, ZPC and PNT groups. 5. ZPC group showed more soluble phenamena than the resin groups(ST, SNT, PT, PNT). 6. Resin cement showed the void spaces in spite of good penetration into the micro-irregularities on both the tooth surface and the cast surface. The void was shown more in PT and PNT groups than in the ST and SNT groups. 7. After the treatment of heat and desiccation for SEM specimen, resin cements were detached more easily from the tooth surface than from the cast surface.

• Restorative Dentistry and Endodontics
• /
• 제34권3호
• /
• pp.223-231
• /
• 2009

본 연구는 인레이 와동에서 인상을 채득하기 전 지각과민처리제 (Isodan)과 2단계 전부식 접착시스템 (One-Step)과 단일단계 자가부식 접착시스템 (All-Bond SE)으로 처리한 후, 복합레진 인레이를 자가 접착형 레진시멘트인 BisCem으로 합착시키는 경우 레진 인레이의 상아질에 대한 미세인장결합강도와 주사현미경적인 분석을 통하여 비교하였다. 본 연구의 결과, 지각과민처리제인 Isodan만을 사용하는 경우 레진 인레이의 결합강도를 감소시킬 수 있으므로 단독 사용보다는 단일 단계 자가부식 시스템 (All-Bond SE)과 같이 사용하는 것이 추천된다.