• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.194-200
• /
• 2011

Recently, RFID(Radio Frequency IDentification) market spread in industry region is entering a phase of stagnation due to cost issue. RFID tag inlay cost has become relatively more expensive due to the recent decrease in chip price. Therefore, a simple and rapid design technique for RFID tag has yet to be implemented to achieve low cost. This paper presents a design technique considering chip impedance for antenna design for improved accuracy and computation time. As a result, it is confirmed that analysis error for resonance ranges within 20MHz and readable range error falls within 1.5m.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.6
• /
• pp.590-594
• /
• 2006

Dental implant has become one of the important option for completely or partially edentulous patients, But it is challenging to reconstruct the severely atrophic ridge. Insufficient bone volume could restrict to place the wide and long implant and because of excessive interocclusal clearance, improper prosthetics could be produced. In this case bone augmentation for implant dentistry is necessary procedure to improve the insufficient bone volume. Therefore, bone augmentation or GBR is the most important procedure for successful implant placement and for ideal crown- root ratio. There are various bone augmentation techniques have been introduced recently; like block bone graft, distraction osteogenesis, inlay graft, onlay graft, etc.... In severe bucco-lingual resorption area, ridge splitting is the first choice of the treatment, because it provides a place for implantation and also has compaction effect. This technique may be indicated for sharp mandible and maxillary ridges in patients whose bone quantity is inadequate for primary stabilization. We report that the clinical experience of bone augmentation using ridge splitting technique in bucco-lingual bone resorption area.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.3
• /
• pp.344-349
• /
• 2017

In this study, we developed a process technology to fabricate RFID tag antennas using a one-sheet inlay micro-pattern forming process by press-molding RFID tag antennas on insulation sheet layers, such as polymer films, using ultrasonic longitudinal vibration. In addition, a fine pattern applicable for RFID tag antennas was manufactured using a $25{\mu}m$ thick thin-plate square wire; this is in contrast to the method that uses a conventional round wire. The developed ultrasonic indentation process can be used to fabricate fine pattern of the RFID antenna using one piece of equipment. The simplified manufacturing process technology has a shorter manufacturing time and is more economical. The developed RFID tag antenna forming technique involves pressing the $25{\mu}m$ square wire directly on the thin sheet insulation sheet of maximum thickness $200{\mu}m$, using a 60 kHz ultrasonic tool horn.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.67-73
• /
• 2012

Fixed dental prostheses such as inlay, onlay, crown, and bridge fabricated by CAD/CAM technique combined with digital impressions is getting popular due to the recent rapid progress of digital impression taking system. For the scope of implant prosthesis, however, digital intra-oral scan hasn't been actively utilized for the fabrication of superstructures. In this case report, 6 cases of titanium-milled custom abutment based on the iTero intra-oral scan data were introduced, five of them were restored with screw-type prosthesis after cementation (SCRP) and the clinical results were satisfactory on restoring the function and esthetics.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.130-143
• /
• 1997

A heat-pressed technique(IPS-Empress, Ivoclar) has been described to construct single unit crown, inlay/onlay and veneers using a partially pre-cerammed and pre-colored glass-leucite ingot that has the greateast strength by the combination of heat-pressed procedure through the smalldiameter sprue and heat treatment procedure. The purpose of this study was to evaluate the flexure strength of a heat-pressed ceramic material(IPS-Empress) without simulated firing treatments according to pontic designs. Two groups of 9 disks(1.4mm thick, 14mm in diameter) each using two types of sprues with different diameters($({\Phi}2.8\;,{\Phi}1.8)$) and numbers were prepared. The specimens were mounted in the testing jig. The flexural strengths were determined, by means of the bi-axial bending test, by loading the center of disk to failure using a universal testing machine(Zwick 145141, Zwick, Germany) at a cross-head speed of 1.0 mm/min. The means flexural strength value of one group using a sprue with ${\Phi}2.8$ was $140.4{\pm}8.0Mpa$. That of the other group using two sprues with ${\Phi}1.8$ was $151.8{\pm}10.3Mpa$. After analysis, results showed that there was a statistical difference between groups(t=2.33m p<0.05). No clnical implications were drawn from these data because of absence of simulated firing treatment.

• Archives of design research
• /
• v.16 no.2
• /
• pp.291-300
• /
• 2003

In metalcraft, there are two kind of skills, one is forming and the other is decoration. And we could discern these skills as metal casting and metal hammering.. In metal casting, there are sand mould, cire perdus, stone mould and sealed monld; In metal hammering, metal forging, repousse technique and metal sheet making. After make form, craftman can use the decoration skills. There are chasing hammering, line carving, dotted line engraving, hair line engraving, kicking line engraving, ring punched ground, inlay, filigee and granulation skills. In korean traditional copper alloy, the craftman used forming and decoration skills. In Korea, tradionally the clatter use bronze for copper alloy; in case of Japan, they use violet coloring, and in case of Chinese, they like to use bronze used copper alloy. In case of Alloy, korean craftman used bronze traditionally, but recently the copper alloy skill is usually used; in case of Japan shibuichi and shakudo skills are used; and in Chinese copper, brass and cupronikel alloy are used.

• Journal of Technologic Dentistry
• /
• v.23 no.2
• /
• pp.75-93
• /
• 2002

This research was preformed for the purpose of preparing the items of standard model of the national dental technician test base on the duty analysis of the dental technician. The results of the duty analysis for the dental technician follows. 1. The dental technician is a profession to make the oral function smooth through the dental supplement and equipment in a scientific method and the skilled technique. 2. The duty of the dental technician are determined as A. preparation for manufacture B. manufacture C. management of the place of the dental technology D. self-development. A. The field of "the preparation for manufacture" are determined as 1. to confirm work authorization 2. To confirm the working model, B. The field of "In manufacture" are determined as 1. to manufacture the temporary crown 2. to manufacture the inlay and crown & bridge prosthesis 3. to manufacture the porcelain fused metal crown prosthesis 4. to manufacture the all ceramic crown prosthesis 5. to manufacture the temporary denture prosthesis 6. to manufacture the partial denture prosthesis 7. to manufacture the complete denture prosthesis 8. to manufacture the attachment prosthesis 9. to manufacture implant prosthesis 10. to manufacture the removable orthodontic device, 11. to manufacture the fixed orthodontic device, 12. to manufacture the orthodontic study cast C. The field of "in management of the dental lab." are determined as 1. management 2. to control the dental lab. D. The field of "In the self-development" are determined as 1. to improve the professionalism 2. self-control. 3. The developing items selected under the duty evaluation of the dental technician are l7s in the manufacture preparation, 1,011s in the manufacture, 7s in the management for the dental technology, 5s in self-development, and in all together 1,040s

• Journal of Technologic Dentistry
• /
• v.28 no.2
• /
• pp.399-415
• /
• 2006

This research collected the curriculum for Dental Technology from a total of 20 schools-eighteen 3-year colleges and two 4-year colleges all in Korea. We divided 4 groups as regions from 20 colleges, and we compared the credit of university students who finished all the required courses and want to apply for a national examination and the credit to be had from another educational institution. As a result of this analysis, we get the conclusion below: 1. In the curriculum, average credit are shown like this order: Science of Dental materials 5.45 Orthodontics Technology 4.10 Dental Morphology 3.80 Oral Anatomy 3.05 Dental Health Science 2.45 Public Health Science 2.40 These show that the credit of fundamental studies, which is in order to take Dental Prosthetics, is increased. 2. In the curriculum, average credit are shown like this order: Crown and Bridge Technology 7.25 Removable Partial Dentures Technology 6.55 Complete Dentures Technology 6.40 Dental Ceramics 4.95 Inlay Technology 2.30 3. In the curriculum, average credit are shown like this order: Crown and Bridge Technology(Lab) 5.90 Removable Partial Dentures Technology(Lab) 5.35 Complete Dentures Technology(Lab) 5.30 Dental Ceramics(Lab) 4.35 Average points between regions in the subject of a national written exam are mostly similar, but the deviation among Science of Dental Materials, Crown and Bridge Technology, Removable Partial Dentures Technology, and Complete Dentures Technology is large. And in the practical technique exam, the deviation among Crown and Bridge Technology(Lab), Removable Partial Dentures Technology(Lab), and Complete Dentures Technology(Lab) is great.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.349-355
• /
• 2020

The Fourth Industrial Revolution has emerged, and technologies of various industries are being converged, compounded, or clouded computing, mobile, or big data. The emergence of a variety of skills and new jobs to match them is bringing the public out of the education and occupation of traditional metal crafts. In this change, craft education should find and study the education method suitable for the present times, and apply it to the educational field to raise public interest and revival. To this end, we will investigate the cases of education in other industries where new materials or technologies have been introduced, and use them in education of traditional metal craft techniques. In addition, we will investigate various cases and features of 3D printing technology and use it for education in craft techniques that have limited time, space and resources.