• 대한두개안면성형외과학회지
• /
• 제14권1호
• /
• pp.24-29
• /
• 2013

Background: The incidence of blow out fractures is increasing and the techniques of diagnosis and treatment have been recently evolving. Despite its clinical significance, there has been no study on orbital inferiomedial blow out fractures. Therefore, this study was designed to investigate the clinical significance of treatment of orbital inferiomedial blow out fractures. Methods: A retrospective review of fifty-seven patients who could be followed up for at least 1 year after surgical reconstruction of pure inferiomedial blow out fracture was undertaken. The transconjunctival approach was performed in all cases. The onlay technique was used in 32 patients and the inlay/sheet method was used in 25 patients. We evaluated the clinical outcomes using the chi-square test. Results: In the group using the onlay technique, postoperative diplopia and enophthalmos were observed in 14 cases and 3 cases, respectively. Of these, 5 cases and 3 cases lasted for more than 6 months, respectively. In the group using the inlay/sheet method, postoperative diplopia was observed in 9 cases, but there were no cases of enophthalmos. Among the 9 diplopia cases, 4 lasted for more than 6 months. Conclusion: Postoperative diplopia and enophthalmos were increased after treatment of inferiomedial blow out fractures compared to isolated medial (0.6%, 0.3%) or inferior (1.8%, 0.6%) blow out fractures. Therefore, careful dissection is necessary not to injure the inferior oblique muscle to decrease the incidence of postoperative diplopia. Moreover, the inlay/sheet method is an effective option for reconstruction of inferiomedial blow out fractures.

• Archives of Plastic Surgery
• /
• 제43권3호
• /
• pp.229-236
• /
• 2016

Recently, diagnoses of and operations for medial orbital blowout fracture have increased because of the development of imaging technology. In this article, the authors review the literature, and overview the accumulated knowledge about the orbital anatomy, fracture mechanisms, surgical approaches, reconstruction materials, and surgical methods. In terms of surgical approaches, transcaruncular, transcutaneous, and transnasal endoscopic approaches are discussed. Reconstruction methods including onlay covering, inlay implantation, and repositioning methods are also discussed. Consideration and understanding of these should lead to more optimal outcomes.

• 대한치과의사협회지
• /
• 제52권6호
• /
• pp.354-362
• /
• 2014

With the development of digital dentistry, various intra-oral scanners which acquire intraoral image without conventional impression taking and stone pouring steps have been introduced. Fixed dental prostheses such as inlay, onlay, crown, and bridge fabricated by CAD/CAM technique combined with digital impressions is getting popular due to the recent rapid progress of digital impression taking system. In comparison with traditional prosthetic procedure, the advantages of intraoral image acquiring and CAD/CAM technique are as follows; the omission of conventional impression materials, reduced workflow step, and increased efficiency by online communication with clinic and laboratory. This review article covers some opinions about the suitable scanning procedures for the various prosthodontic treatments and the utilization of digital intraoral scanner and CAD/CAM system.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.647-655
• /
• 1998

심미도재수복시의 와동의 폭과 교두의 capping이 응력의 분포에 미치는 영향을 비교하기 위하여 연속사진 촬영술을 이용하여 상악제1소구치의 3차원 유한요소 모델을 제작하였다. 법랑질, 상아질, 도재 및 복합레진시멘트의 각각의 재질에 대한 물성치를 부여하고, 140N의 하중을 가하여 Super SAP 프로그램으로 해석하여 다음과 같은 결과를 얻었다. 1. 응력은 탄성계수값이 큰 법랑질과 도재를 따라 분포되고, 연질의 상아질에는 적게 발생된다. 2. 와동의 협측치수선각부위에서는 인레이모델의 경우에는 와동폭의 증가에 따른 응력의 증가는 관찰되지 않으나, 온레이모델에서는 응력의 증가가 관찰된다. 3. 온레이모델의 경우에는 근심협측교두를 피개하고 있는 도재부위에 최대주응력이 크게 나타나고, 치은변연부의 도재에서는 교두를 피개하지 않은 인레이모델의 해당되는 법랑질에 비해 응력이 1/2정도로 감소된다. 4. 하중이 증가되면 잔존치질의 파절은 근심와동의 협측치은선각부위에서 협측보다는 치은을 향해 경사지게 일어날 것이다. 5. 교두를 피개하면 교두피개부위에서의 도재의 파절가능성은 증가되고, 치은변연에서는 도재와 하부의 치질의 파절가능성은 감소된다. 6. 도재를 이용하여 교두를 피개할 경우에는 응력을 견딜 수 있는 도재의 두께를 부여할 수 있도록 교두를 충분히 삭제하여야 하고, 충분한 강도를 갖는 도재를 선택하여야 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권2호
• /
• pp.166-172
• /
• 1998

Missing of the upper posterior dentition can cause alveolar bone resorption & pneumatization of Maxillary sinus wall, which makes traditional implant placement impossible, The solution includes various methods to the posterior maxilla to provide adequate bone support for implant installation and long-term survival. -- sinus floor elevation, sinus-lift graft, inlay graft using LeFort I osteotomy, onlay graft, This is a clinical Sr. retrospective study on implant surgery & prosthodontic restoration with upper edentulous posterior jaw from Jan. 1990. to Jun. 1997 at implant clinic of Chonbuk National University Hospital. The results obtained were as follows: 1. Six hundred ninety-nine implants were placed on upper posterior jaw of two hundred seventeen patients, among them one hundred sixty-five implants were placed in forty-four patients with sinus lift. 2. The height of the remained alveolar bone was classified on the base of Misch's concept. This included seventy-nine SA-1s, ninety-seven SA-2s, sixty-five SA-3s and sixty SA-4s. 3. Ninety percent of implants were successfully integrated in non-grafted area and eighty-seven percent of implants were successully integrated in sinus lift area.

• 대한치과보철학회지
• /
• 제50권1호
• /
• pp.67-73
• /
• 2012

최근 디지털 인상채득 시스템이 개발되면서 이를 기존의 CAD/CAM 시스템과 접목한 인레이, 온레이, 크라운이나 간단한 계속가공의치 등의 고정성 보철물의 제작이 활발히 소개되고 있다. 그러나 임플란트 보철에서는 주로 기존의 아날로그식 인상채득 후 이를 스캔하여 제작하는 방법이 사용되어 왔으나, 구강 내 디지털 스캔한 데이터를 이용하여 나사형 보철물을 제작하는 술식은 아직 활발히 이루어지지 않았다. 이에 본 증례보고에서는 6명의 환자를 대상으로 구강 내 스캐너인 iTero를 사용하여 디지털 스캔을시행한후그중다섯명은맞춤형지대주와 시멘트 합착 후 나사형 임플란트 보철물(screw-retained implant prosthesis after cementation, or SCRP)을 제작하였고, 임상적으로 기능과 심미적인 측면으로 만족할 만한 결과를 얻었기에 이를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.130-143
• /
• 1997

A heat-pressed technique(IPS-Empress, Ivoclar) has been described to construct single unit crown, inlay/onlay and veneers using a partially pre-cerammed and pre-colored glass-leucite ingot that has the greateast strength by the combination of heat-pressed procedure through the smalldiameter sprue and heat treatment procedure. The purpose of this study was to evaluate the flexure strength of a heat-pressed ceramic material(IPS-Empress) without simulated firing treatments according to pontic designs. Two groups of 9 disks(1.4mm thick, 14mm in diameter) each using two types of sprues with different diameters($({\Phi}2.8\;,{\Phi}1.8)$) and numbers were prepared. The specimens were mounted in the testing jig. The flexural strengths were determined, by means of the bi-axial bending test, by loading the center of disk to failure using a universal testing machine(Zwick 145141, Zwick, Germany) at a cross-head speed of 1.0 mm/min. The means flexural strength value of one group using a sprue with ${\Phi}2.8$ was $140.4{\pm}8.0Mpa$. That of the other group using two sprues with ${\Phi}1.8$ was $151.8{\pm}10.3Mpa$. After analysis, results showed that there was a statistical difference between groups(t=2.33m p<0.05). No clnical implications were drawn from these data because of absence of simulated firing treatment.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권6호
• /
• pp.590-594
• /
• 2006

Dental implant has become one of the important option for completely or partially edentulous patients, But it is challenging to reconstruct the severely atrophic ridge. Insufficient bone volume could restrict to place the wide and long implant and because of excessive interocclusal clearance, improper prosthetics could be produced. In this case bone augmentation for implant dentistry is necessary procedure to improve the insufficient bone volume. Therefore, bone augmentation or GBR is the most important procedure for successful implant placement and for ideal crown- root ratio. There are various bone augmentation techniques have been introduced recently; like block bone graft, distraction osteogenesis, inlay graft, onlay graft, etc.... In severe bucco-lingual resorption area, ridge splitting is the first choice of the treatment, because it provides a place for implantation and also has compaction effect. This technique may be indicated for sharp mandible and maxillary ridges in patients whose bone quantity is inadequate for primary stabilization. We report that the clinical experience of bone augmentation using ridge splitting technique in bucco-lingual bone resorption area.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권6호
• /
• pp.570-578
• /
• 2006

A severely atrophic maxilla may disturb the proper implant placement. The various bone graft techniques are required for simultaneous or delayed implantation in the cases of atrophic alveolar ridges. We present 11 consecutive patients treated with simultaneous implantation using the autogenous inlay and/or onlay bone grafts from iliac crest to the floor of the maxillary sinus and the alveolar crest. In the cases of atrophic maxilla, a total 69 implants were simultaneously placed with autogenous iliac bone graft. 40 fixtures were inserted in the sinus floor simultaneously with subantral block bone graft, the other 29 fixtures were placed in the anterior or premolar areas with block or particulate bone graft. The vertical alveolar bone height was measured with Dental CT at the preoperation and 6 months postoperation. Moreover, the implant stability quotients (ISQ) were measured by $Osstell^{TM}$ during second implant surgery at 6 months later of first implantation. All implants were obtained successful osseointegration with the grafted bone. The mean vertical increases were 3.9mm in the anterior ridges and 12.8mm in the posterior ridges. During the second implant surgery, mean ISQ were 62.95 in the anterior ridge and 61.32 in the posterior ridge. We concluded that the simultaneous implantation with autogenous iliac bone graft were stable and available methods for severely atrophic maxilla.

• 치위생과학회지
• /
• 제18권1호
• /
• pp.42-49
• /
• 2018

The computer-aided design/computer-aided manufacturing (CAD/CAM) system was introduced to shorten the production time of all-ceramic restorations and the number of patient visits. Among these types of ceramic for dental CAD/CAM, they have been processed into inlay, onlay, and crown shapes using leucite-reinforced glass-ceramics to improve strength. The purpose of this study was to observe the mechanical properties and microstructure of leucite-reinforced glass-ceramics for dental CAD/CAM. Two types of leucite-reinforced glass-ceramic blocks (IPS Empress CAD, Rosetta BM) were prepared with diameter of 13 mm and thickness of 1 mm. Biaxial flexural testing was conducted using a piston-on-three-ball method at a crosshead speed of 0.5 mm/min. Weibull statistics were used for the analysis of biaxial flexural strength. Fracture toughness was obtained using an indentation fracture method. Specimens were observed by field emission scanning electron microscopy to examine the microstructure of the leucite crystalline phase after acid etching with 0.5% hydrofluoric acid aqueous solution for 1 minute. The results of strength testing showed that IPS Empress CAD had a mean value of $158.1{\pm}8.6MPa$ and Rosetta BM of $172.3{\pm}8.3MPa$. The fracture toughness results showed that IPS Empress CAD had a mean value of $1.28{\pm}0.19MPa{\cdot}m^{1/2}$ and Rosetta BM of $1.38{\pm}0.12MPa{\cdot}m^{1/2}$. The Rosetta BM sample exhibited higher strength and fracture toughness. Moreover, the crystalline phase size and ratio were increased in the Rosetta BM sample. The above results are expected to elucidate the basic mechanical properties and crystal structure characteristics of IPS Empress CAD and Rosetta BM. Additionally, they will help develop leucite-reinforced glass-ceramic materials for CAD/CAM.